Browse > Article
http://dx.doi.org/10.7837/kosomes.2022.28.1.153

Case Study on the Bogie Arrangement of the Load-out System for On-ground Shipbuilding  

Hwang, John-Kyu (Ocean Solution Co. Ltd.)
Ko, Jae-Yong (Department of Naval Architecture and Ocean Engineering, Mokpo National Maritime University)
Publication Information
Journal of the Korean Society of Marine Environment & Safety / v.28, no.1, 2022 , pp. 153-160 More about this Journal
Abstract
This study presents the bogie arrangement of the load-out system for on-ground shipbuilding. The load-out system is one of the most important systems to perform the bogie arrangement of the on-ground shipbuilding technique without dry dock facilities, and this system is composed of four pieces of equipment: bogies, driving bogie with motors, trestles, and power packs. Also, the bogie arrangement analysis (BAA) is employed to simply calculate the reaction forces at the trestle for structural safety. In this context, the purpose of this study is to propose an optimal design method to perform the bogie arrangement satisfying structural safety requirements with minimal cost. It is expected that the proposed methodology will contribute to the effective practice as well as to the improvement of competitive capability for shipbuilding companies at the on-ground shipbuilding stage. Furthermore, we describe some problems and their solutions of the deformation that may occur in the bottom of the hull during the load-out process. As a result, it is shown that we applied it to the 114K crude oil tanker (Minimum bogie 54EA) and the 174K CBM LNG carrier (Minimum bogie 88EA), it can minimize the number of bogie and critical risks (Safety rate 1.61) during the load-out of on-ground shipbuilding. Through this study, the reader will be able to learn successful load-out operation and economic shipbuilding in the future.
Keywords
Load-out system; On-ground shipbuilding; Bogie; Trestle; Power pack; Floating dock;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Kim, S. C., C. H. Ryu, J. H Lee, K. S. Lee, and J. H. Choi(2008a), On the docking analysis of global ship structure using simplified grillage model, Journal of the Society of Naval Architects of Korea, Vol. 45, No. 6, pp. 710-718.   DOI
2 Ryu, C. H., S. C. Kim, and D. G. Kim(2013), Three-Dimensional Grillage Analysis of Reaction Forces on Support of Pre-Erection Block, Journal of Ocean Engineering and Technology Vol. 27, pp. 1-8.
3 Yang, Y. T., H. G. Cho, K. Y. Yoon, S. S. Ha, and H. S. Kang(2003), Development of load-out methodology for ground-build FSO, Offshore Technology Conference.
4 Yoon, K. Y., Y. T. Yang, M. K. Shin, and Ramasamy K. Kumar(2005), Structural analysis for load-out, tow and float-off of the conventional tankers built on ground, Proceeding of The Joint Conference of the Korean Association of Ocean Science and Technology Societies, pp. 900-909.
5 Kim, J. H., J. Y. Lee, and S. C. Park(2008b), A Development of Floating Dock Control Simulator for Skid Launching System, Journal of Navigation and Port Research, Vol. 32, pp. 1-7.   DOI
6 Dung, N. T.(2013), First jack-up RIG load-out in Vietnam, Petro vietnam-Journal, Vol. 6, pp. 48-54.
7 Kim, J. H.(2007), Floating dock control application for skid launching system (SLS), M.Sc. Thesis, Graduate School of Korea Maritime University.
8 Kim, J. W., H. S. Shin, W. S. Lee, and Y. T. Yang(2005), Motion and mooring analysis during float-off of the on-ground build ship, Proceeding of The Joint Conference of the Korean Association of Ocean Science and Technology Societies, pp. 1102-1109.
9 Yang, Y. T., B. N. Park, and S. S. Ha(2005), Development of load-out design methodology and numerical strength evaluation for on-ground-build FSO, Ocean Engineering, Vol. 32, pp. 986-1014.   DOI