• Title/Summary/Keyword: mild solutions

검색결과 115건 처리시간 0.029초

축대칭 지형에 적합한 경계처리기법 (Boundary Treatment for Axi-symmetric Topography)

  • 정태화;신현정;손민우
    • 한국콘텐츠학회논문지
    • /
    • 제13권2호
    • /
    • pp.505-511
    • /
    • 2013
  • 경사진 지형을 갖는 축대칭 지형에 적용이 가능한 경계처리기법을 개발하였다. 섬 지형의 경우 복잡한 지형으로 인하여 유한요소모형을 사용하여 파의 변형을 해석하는 것이 좋지만 해수와 접하는 섬의 단면이 연직이 아닌 경우에는 수심이 0이 되어 경계면을 적절하게 처리하기 어렵다는 단점이 있다. 본 연구에서는 장파에 대한 해석해를 활용하여 임의의 경사진 경계면에 적용가능한 경계처리기법을 개발하였다. 이를 위해 지배방정식으로 완경사 방정식을 사용하였으며 계산 영역을 해석해 영역과 수치해 영역으로 구분하여 해석해 영역에 기존의 해석해를 적용한 후 수치해와 결합하여 모델을 완성하였다. 유도된 해는 기존의 해석해와 비교하여 그 타당성을 검증하였다.

EVP방법(方法)을 이용한 완경사(緩傾斜) 영역(領域)에서의 파랑변형(波浪變形) 수치모형(數値模型) (EVP Models for Wave Transformation in Regions of Slowly Varying Depth)

  • 오성택;이길성;이철응
    • 대한토목학회논문집
    • /
    • 제12권3호
    • /
    • pp.231-238
    • /
    • 1992
  • 계산시간(計算時間)의 단축(短縮)을 위하여 EVP(Error Vector Propagation) 방법(方法)을 사용하여 타원형(楕圓形) 완경사방정식(緩傾斜方程式)을 해석(解析)하였다. 수치실험(數値實驗)은 수중(水中)에 타원형(楕圓形) 여울이 존재하는 완경사(緩傾斜) 해역(海域)에서 수행하였으며, 포물선형(抛物線形) 모형(模型) 및 쌍곡선형(雙曲線形) 모형(模型)을 같이 계산하여 각각의 결과(結果)를 수리실험(水理實驗) 결과(結果)와 비교(比較)하였다. 또한 이안제(離岸堤)가 설치된 파랑장(波浪場)의 경우에도 쌍곡선형(雙曲線形) 모형(模型)의 결과(結果) 및 수리실험(水理實驗) 결과(結果)와 비교(比較)하였다. 적용결과(適用結果) 계산시간(計算時間) 면에서는 다른 모형(模型)에 비하여 만족스럽게 단축(短縮)할 수 있었으며, 해(解)의 정확성(正確性)에서는 약간의 진동현상(振動現象)이 나타나지만 그 경향(傾向)은 잘 일치하였다.

  • PDF

근관 충전용 Sealer가 수종의 세포에 미치는 독성효과에 관한 연구 (A STUDY ON THE CYTOTOXICITY OF ROOT CANNAL SEALERS TO SEVERAL CELL LINES)

  • 임미경;이정식
    • Restorative Dentistry and Endodontics
    • /
    • 제17권2호
    • /
    • pp.263-286
    • /
    • 1992
  • This study was performed to evaluate and compare the cytotoxic effects of five root canal sealers to several different cell lines. Five root canal sealers were AH-26, N2, Sealapex, Tubliseal, and Vitapex. Each sealers were mixed according to the manufacturer's instructions, and culture media were added to each sealers immediately after mixing (the immediate group) and after three days (the third day group) and seven days (the seventh day group) respectively. And every sealer solutions were diluted to 1:1, 1:2, 1:3 and 1:4. Three different permanent cell lines (HEp-2, McCoy, MRC-S) and human gingival fibroblasts and mononuclear cells were challenged by each sealer solution and the cytopathic effects were evaluated using MTT-ELISA, MTT-microscopy, and lactate dehydrogenase (LD) activity. The results were as follows: 1. In HEp-2 and MRC-5 cells, Vitapex was the least cytotoxic sealers. 2. AH-26 showed mild cytotoxic effects to HEp-2, gingival fibroblast and mononuclear cells. 3. N2 was the most toxic sealer to gingival fibroblast and it showed relatively strong cytotoxicity to HEp-2, McCoy and MRC-S cells. 4. Tubliseal showed strong cytotoxic effects to HEp-2, McCoy, MRC-S, and mononuclear cells. 5. Sealapex showed strong cytotoxic effect to HEp-2, McCoy, and gingival fibroblasts.

  • PDF

Repassivation Behavior of Ni Base Alloys in a Mild Alkaline Water at 300℃

  • Hwang, Seong Sik;Kim, Dong Jin;Kim, Joung Soo;Kim, Hong Pyo
    • Corrosion Science and Technology
    • /
    • 제5권3호
    • /
    • pp.85-89
    • /
    • 2006
  • KAERI(Korea Atomic Energy Research Institute) has developed a repassivation rate test system which can be operated at $300^{\circ}C$. It consists of an autoclave, three electrodes for an electrochemical test and a diamond scratch tip. All the electrodes are electrically insulated from the autoclave by using high temperature fittings. Reproducible repassivation curves of alloy 600 at 300 C were obtained. Repassivation rate of alloy 600 at pH 13 was slower than that of pH 10. Stress corrosion cracking test was carried as a function of the pH at a high temperature. At pH 10, alloy 600 showed a severe stress corrosion cracking(SCC), whereas it did not show a SCC at pH 7. From the viewpoint of a relationship between the current density and the charge density, a big difference was observed in the two solutions; the slope of pH 13 was steeper than that of pH 10. So the stress corrosion susceptibility at pH 13 seems to be higher than that of pH 10. The system would be a good tool to evaluate the SCC susceptibility of alloy 600 at a high temperature.

Monitoring of Degradation Process of Commercial ME Tapes under High Humidity Environment by AC Impedance Techniques

  • Take, Seisho;Shimanuki, Akiko;Itoi, Yasuhiko;Okuyama, Masaru
    • Corrosion Science and Technology
    • /
    • 제3권5호
    • /
    • pp.194-197
    • /
    • 2004
  • The corrosion resistance of several kind of ME (Metal Evaporated) tape has been investigated both in mild sulfuric acid solution and NaCl solution by electrochemical impedance spectroscopy. It was found that the degradation of ME tapes was accelerated with increasing the concentration of sulfuric acid. There was no significant change in corrosion resistance when the concentration of NaCl was under 3.5 wt%. However, the impedance value decreased when the concentration of NaCl was up to 10 wt%. The degradation of backside of ME tapes was also investigated by AC impedance measurements. The results showed that the impedance behavior of backside plastic film changed with the concentration of sulfuric acid even at the beginning of immersion, implying the changing of the permeability for the backside of ME tapes. It was also found that the corrosion resistance of DVC (Digital Video Cassette) ME tape was better that that of Hi-8mm ME tapes in sulfuric acid solutions. Also, the backside of DVC ME tape showed better water resistance than that of Hi8 ME tapes.

Absorption and Fluorescence of Sm(III) Complexes with some Terdentate Ligands

  • Kim, Jong-Goo;Yoon, Soo-Kyung;Yun, Sock-Sung;Kang, Jun-Gill
    • Bulletin of the Korean Chemical Society
    • /
    • 제13권1호
    • /
    • pp.54-59
    • /
    • 1992
  • Spectroscopic measurements and theoretical calculations are performed for the four 1 : 3 Sm(III) : ligand solutions. The ligands included in this study are oxidiacetate, iminodiacetate, methyliminodiacetate and dipicolinate. The oscillator strengths for the $4f{\to}4f$ multiplet-to-multiplet transitions are empirically determined from the absorption spectra. The intensity parameters ${\Omega}_{\lambda}\;({\lambda}=2,\;4,\;6)$ of $Sm^{3+}$(aquo) and ${SmL_3}^{3-}$ complexes are also evaluated by applying the Judd-Ofelt theorem to the observed oscillator strengths. The values of the intensity parameters are compared and discussed in term of structural properties of the complexes. In addition, the fluorescence spectra are reported for the Sm(III) complex systems under mild alkaline condition. The excitation from the $^6H_{5/2}$ ground state to any excited states lying above the emitting energy level $(^4G_{5/2})$ produces four fluorescence bands, following nonradiative transitions from a certain excited state to the $^4G_{5/2}$ state. The ratios of oscillator strengths of ${SmL_3}^{3-}$ complexes to that of $Sm^{3+}$(aquo) are also evaluated from the fluorescence spectra and compared to the results obtained from the absorption bands.

Modified Design Formula for Predicting the Ultimate Strength of High-tensile Steel Thin Plates

  • Park, Joo Shin;Seo, Jung Kwan
    • 해양환경안전학회지
    • /
    • 제27권3호
    • /
    • pp.447-456
    • /
    • 2021
  • Methods for predicting the ultimate/buckling strength of ship structures have been extensively improved in terms of design formulas and analytical solutions. In recent years, the design strategy of ships and offshore structures has tended to emphasize lighter builds and improve operational safety. Therefore, the corresponding geometrical changes in design necessitate the use of high-tensile steel and thin plates. However, the existing design formulas were mainly developed for thick plates and mild steels. Therefore, the calculation methods require appropriate modification for new designs beased on high-tensile steel and thin plates. In this study, a modified formula was developed to predict the ultimate strength of thin steel plates subjected to compressive and shear loads. Based on the numerical results, the effects of the yield stress, slenderness ratio, and loading condition on the buckling/ultimate strength of steel plates were examined, and a newly modified double-beta parameter formula was developed. The results were used to derive and modify existing closed-form expressions and empirical formulas to predict the ultimate strength of thin-walled steel structures.

취송류의 해석위와 (x-$\sigma$) 수치모형과의 비교 (Comparison of an Analytic Solution of Wind-driven Current and all (x-$\sigma$) Numerical Model)

  • 이종찬;최병호
    • 한국해안해양공학회지
    • /
    • 제4권4호
    • /
    • pp.208-218
    • /
    • 1992
  • 1차원 폐쇄형 수노에서 바람에 의해 발생되는 흐름에 대해 수면구배와 유속의 수직구조를 제시하는 해석해를 정상상태 하에서 유도하였다. 해석해는 저면의 경계조건으로 저면마찰응력 $ au$$_{b}$를 부여하는 가정하에 유도되었으며, 연직 운동양 확산계수 $ extsc{k}$$_{M}$이 수심에 무관한 상수, 수심의 1차함수 및 2차함수일 경우를 포함하며, 저면류속이 no-slip이라는 가정과 저면마찰응력 $\tau$$_{b}$의 매개화에 따른 관계를 제시하고 있다. 모드 분리된, $\sigma$좌표를 채택한 (x-$\sigma$) 수치모형 결과와 유도된 해석해를 비교ㆍ검토하였다. 비교된 경우는 $textsc{k}$$_{M}$이 상수, 수심의 1차 및 2차함수인 경우로써, $textsc{k}$$_{M}$이 상수일 경우는 균일 수심, 완만한 수심경사 및 비교적 급격한 수심경사를 갖는 경우에 대해 수면구배와 유속구조를 검토 하였다. $textsc{k}$$_{M}$이 수심의 1차 및 2차함수인 경우에는 $\tau$$_{b}$의 변화에 대한 유원구조를 비교ㆍ분석하였다. 비교ㆍ분석 결과 유연구조는 $textsc{k}$$_{M}$ 값 뿐만 아니라 $textsc{k}$$_{M}$의 형태에 의해서도 변하며, $\tau$$_{b}$의 간에 의해서도 변하는 것을 보이고 있으며, 계산결과는 전반적으로 해자해와 일치함을 보였다.치함을 보였다.보였다.치함을 보였다.

  • PDF

대인관계 인지 문제해결 기술훈련의 효과 - 교육가능 정신지체 청소년을 대상으로 - (EFFECTS OF INTERPERSONAL COGNITIVE PROBLEM SOLVING SKILLS TRAINING ON ADOLESCENTS WITH MILD MENTAL RETARDATION)

  • 오경자;이미선
    • Journal of the Korean Academy of Child and Adolescent Psychiatry
    • /
    • 제6권1호
    • /
    • pp.100-108
    • /
    • 1995
  • 본 연구에서는 아동들의 적응을 향상시키기 위해 개발된 Spivack와 Shure(1982)의 국민학생용 대인관계 인지 문제해결 기술훈련 프로그램을 정신지체 학생들의 능력 및 특성에 맞도록 수정, 압축하여, 이를 교육가능 정신지체 청소년들에게 8주간 총 32회(1회 $30{\sim}35$분)에 걸쳐 훈련을 실시하였다. 연구 결과, 인지 문제해결 기술훈련을 받은 실험집단의 정신지체 학생은 훈련을 받지 않은 통제집단의 정신지체 학생보다 훈련 전에 비해 대안적 사고 능력과 결과적 사고 능력이 유의미하게 향상되었다. 그러나 부모에 의한 행동평가(CBCL) 및 교사에 의한 행동 평가에서는 실험집단과 통제집단간에 유의미한 차이가 나타나지 않았다. 이상의 결과에서 대인관계 인지 문제해결 기술훈련이 실제 문제해결 기술능력 가운데 중요한 인지기제의 향상에 유의미한 효과를 나타내었다고 결론 내릴 수 있으나, 이러한 인지기제의 유의미한 향상이 짧은 훈련 기간 등의 문제로 인하여 행동상의 적응으로는 연결되지 않았다. 앞으로의 연구에서는 훈련기간을 길게 하여 과잉학습을 충분히 시키고, 부모 훈련을 함께 실시하며, 행동적 접근을 병행한다면 대인관계 기술훈련의 효과가 확실히 나타나고, 그 효과가 지속되며 실제 생활 장면에서 일반화될 수 있으리라고 생각한다.

  • PDF

차아염소산나트륨 처리와 멸균법이 근관 치료용 파일의 부식에 미치는 영향에 관한 연구 (THE EFFECT OF NAOCL TREATMENT AND STERILIZATION PROCEDURES ON THE CORROSION OF ENDODONTIC FILES)

  • 양원경;라윤식;이영규;손호현;김미리
    • Restorative Dentistry and Endodontics
    • /
    • 제30권2호
    • /
    • pp.121-127
    • /
    • 2005
  • 근관 치료시 많이 사용되고 있는 $K-flex^{(R)}$ S-S 파일 (Maillefer, USA)과 $Profile^{(R)}$ Ni-Ti 파일 (Maillefer, USA), $K-3^{(R)}$ Ni-Ti파일 (SybronEndo, USA)의 부식 정도를 보기 위하여 총 360개의 20번 file을 1) 멸균소독 방법 (고압가열멸균소독, E-O gas 소독) ,2) 근관세척 액 ($5,25\%$ 차아염소산나트륨, 생리식염수) ,3) 멸균소독 횟수 (1, 5, 10회 ) 에 따라 36개 실험군으로 나누었다. 각각의 파일을 각 군별로 처리한 뒤, 세 명의 검사자가 광학 현미경 하에서 25배의 배율로 검사하여 0; 부식 없음, 1; 경도의 부식, 2; 중등도의 부식, 3; 심한 부식으로 점수화 하였다. 심한 부식을 보이는 파일의 표면은 SEM으로 관찰하였고 Kruskal-Wallis test (p < 0.05)를 이용하여 통계 분석 처리하여 차아염소산나트륨 접촉 여부와 멸균소독 방법의 차이에 의한 부식 정도를 평가하였다. 그 결과 고압가열멸균소독을 10회 시행한 파일은 통계적으로 유의한 차이를 보여 부식 정도가 심하였고, 1회나 5회 고압가열멸균소독을 시행한 파일과 E-O 가스로 소독한 파일들은 부식의 정도가 경미하여 통계적으로 유의하지 않았다. 차아염소산나트륨 접촉 여부와 제조사 혹은 파일 재료에 따른 유의성 있는 차이는 없었다