• 한국안광학회지
• /
• 제18권2호
• /
• pp.93-99
• /
• 2013

목적: 본 연구는 현장현시 건성안 진단 테스트 중에 현재 사용되고 있으나 부정확한 결과로 신뢰도가 떨어지는 쉬르머 용지를 대체 할 수 있는 차세대 건성안 진단 테스트 용지를 미세유체공학을 이용하여 개발하고자 하였다. 방법: 왁스로 패턴을 제조한 친수성 크로마토그래피 용지를 pH에 따른 색 변화가 나타나도록 안토시안으로 염색을 하였다. 인공 누액의 젖음 속도를 인공 누액과 32명의 참가자의 눈물을 이용하여 임상 측정하였다. 결과: 인공 누액을 이용하였을 경우 쉬르머 용지에서는 소량의 용액은(0.5 ml이하) 흡수거리가 도출되지 않았으나 새로 개발된 용지는 시간에 따른 인공 누액의 흡수거리가 확연히 나타났다. 임상실험에서도 새로 개발된 검사 용지는 TBUT (tear break-up time)결과와 부합하는 건성안 진단 결과를 보였다. 결론: 개발된 건성안 진단 용지는 간편하게 사용될 수 있을 뿐만 아니라 기존 쉬르머 용지와 같은 현장현시 건성안 진단 매체와 비교 했을 경우 건성안 판별의 정확성이 높았다.

• Smart Structures and Systems
• /
• 제8권1호
• /
• pp.17-37
• /
• 2011

The microcantilever (MCL) sensor is one of the most promising platforms for next-generation label-free biosensing applications. It outperforms conventional label-free detection methods in terms of portability and parallelization. In this paper, an overview of recent advances in our understanding of the coupling between biomolecular interactions and MCL responses is given. A dual compact optical MCL sensing platform was built to enable biosensing experiments both in gas-phase environments and in solutions. The thermal bimorph effect was found to be an effective nanomanipulator for the MCL platform calibration. The study of the alkanethiol self-assembly monolayer (SAM) chain length effect revealed that 1-octanethiol ($C_8H_{17}SH$) induced a larger deflection than that from 1-dodecanethiol ($C_{12}H_{25}SH$) in solutions. Using the clinically relevant biomarker C-reactive protein (CRP), we revealed that the analytical sensitivity of the MCL reached a diagnostic level of $1{\sim}500{\mu}g/ml$ within a 7% coefficient of variation. Using grazing incident x-ray diffractometer (GIXRD) analysis, we found that the gold surface was dominated by the (111) crystalline plane. Moreover, using X-ray photoelectron spectroscopy (XPS) analysis, we confirmed that the Au-S covalent bonds occurred in SAM adsorption whereas CRP molecular bindings occurred in protein analysis. First principles density functional theory (DFT) simulations were also used to examine biomolecular adsorption mechanisms. Multiscale modeling was then developed to connect the interactions at the molecular level with the MCL mechanical response. The alkanethiol SAM chain length effect in air was successfully predicted using the multiscale scheme.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권23호
• /
• pp.10057-10059
• /
• 2015

Positron emission tomography (PET) as the functional component of current hybrid imaging (like PET/CT or PET/MRI) seems to dominate the horizon of medical imaging in coming decades. $^{18}$Flourodeoxyglucose ($^{18}FDG$) is the most commonly used probe in oncology and also in cardiology and neurology around the globe. However, the major capital cost and exorbitant running expenditure of low to medium energy cyclotrons (about 20 MeV) and radiochemistry units are the seminal reasons of low number of cyclotrons but mushroom growth pattern of PET scanners. This fact and longer half-life of $^{18}F$ (110 minutes) have paved the path of a centralized model in which $^{18}FDG$ is produced by commercial PET radiopharmacies and the finished product (multi-dose vial with tungsten shielding) is dispensed to customers having only PET scanners. This indeed reduced the cost but has limitations of dependence upon timely arrival of daily shipments as delay caused by any reason results in cancellation or rescheduling of the PET procedures. In recent years, industry and academia have taken a step forward by producing low energy, table top cyclotrons with compact and automated radiochemistry units (Lab-on-Chip). This decentralized strategy enables the users to produce on-demand doses of PET probe themselves at reasonably low cost using an automated and user-friendly technology. This technological development would indeed provide a real impetus to the availability of complete set up of PET based molecular imaging at an affordable cost to the developing countries.

• 대한화장품학회지
• /
• 제34권4호
• /
• pp.245-258
• /
• 2008

본 총설에서는 마이크로플루딕스 기술에 대한 기초연구를 소개하고, 이 기술을 통하여 화장품산업분야에서 응용성이 큰 동공구조체, 응답성 소재, 캡슐 소재, 다층 콜로이드 구조체 등과 같은 신소재의 합성이 가능함을 기술한다. 마이크로플루딕스 기술이 적용되어 개발된 기능성 신소재들은 그 크기와 내부 모폴로지를 정확하게 피코리터 수준에서 조절할 수 있다. 또한, 소재의 화학조성을 다양하게 임의 조절할 수 있고, 고차 층구조를 갖는 콜로이드 입자나 캡슐의 개발까지도 가능하여 그 응용성은 무궁무진하다고 할 수 있다. 기본적으로 약물전달계, 화학물 분리공정, 바이오센서, 애튜에이터 등의 응용연구에 매우 유용하게 활용될 수 있다. 화장품산업에서도 마이크로플루딕스 기술을 이용하여 고기능성 신소재 개발이나 신유형 화장품 개발이 가능할 것으로 기대되어 더욱 복합적인 연구개발이 진행되어야 할 것이다.

• 소성∙가공
• /
• 제15권9호
• /
• pp.667-672
• /
• 2006

Agglutination is one of the most commonly employed reactions in clinical diagnosis. In this paper, we have designed and fabricated nickel mold insert for injection molding of a microfluidic lab-on-a-chip for the purpose of the efficient detection of agglutination. In the presented microfluidic lab-on-a-chip, two inlets for sample blood and reagent, flow guiding microchannels, improved serpentine laminating micromixer(ISLM) and reaction microwells are fully integrated. The ISLM, recently developed by our group, can highly improve mixing of the sample blood and reagent in the microchannel, thereby enhancing reaction of agglutinogens and agglutinins. The reaction microwell was designed to contain large volume of about $25{\mu}l$ of the mixture of sample blood and reagent. The result of agglutination in the reaction microwell could be determined by means of the level of the light transmission. To achieve the cost-effectiveness, the microfluidic lab-on-a-chip was realized by the injection molding of COC(cyclic olefin copolymer) and thermal bonding of two injection molded COC substrates. To define microfeatures in the microfluidic lab-on-a-chip precisely, the nickel mold inserts of lab-on-a-chip for the injection molding were fabricated by combining the UV photolithography with a negative photoresist SU-8 and the nickel electroplating process. The microfluidic lab-on-a-chip developed in this study could be applied to various clinical diagnosis based on agglutination.

• Journal of Magnetics
• /
• 제17권4호
• /
• pp.302-307
• /
• 2012

We have designed, fabricated and tested an integrated microfluidic chip with a Planar Hall Effect (PHE) sensor. The sensor was constructed by sequentially sputtering Ta/NiFe/Cu/NiFe/IrMn/Ta onto glass. The microfluidic channel was fabricated with poly(dimethylsiloxane) (PDMS) using soft lithography. Magnetic nanoparticles suspended in hexadecane were used as ferrofluid, of which the saturation magnetisation was 3.4 emu/cc. Droplets of ferrofluid were generated in a T-junction of a microfluidic channel after hydrophilic modification of the PDMS. The size and interval of the droplets were regulated by pressure on the ferrofluid channel inlet. The PHE sensor detected the flowing droplets of ferrofluid, as expected from simulation results. The shape of the signal was dependent on both the distance of the magnetic droplet from the sensor and the droplet length. The sensor was able to detect a magnetic moment of $2{\times}10^{-10}$ emu at a distance of 10 ${\mu}m$. This study provides an enhanced understanding of the magnetic parameters of ferrofluid in a microfluidic channel using a PHE sensor and will be used for a sample inlet module inside of integrated magnetic lab-on-a-chip systems for the analysis of biomolecules.

• 한국전자파학회논문지
• /
• 제26권5호
• /
• pp.506-513
• /
• 2015

본 논문에서는 메타물질 흡수체를 사용한 새로운 에탄올 농도 검출 센서를 제안한다. 메타물질 흡수체는 분할고리십 자공진기(SRCR: Split Ring Cross Resonator) 구조와 미세유체 채널로 구성되어 있다. SRCR 구조는 capacitive 간극 부근의 실효 유전율에 민감하게 반응하는 LC 공진을 발생시킨다. 미세유체 채널은 마이크로 리터 단위의 극미량 액체를 사용하여 유전체 기판의 실효 유전율을 변화시킬 수 있다. 본 연구에서 제안한 미세유체 메타물질 흡수체는 미세유체 채널에 주입된 에탄올의 농도에 따른 전기적 특성을 감지하여 그 농도를 검출할 수 있다. 제안된 흡수체는 도파관 측정법을 사용하여 측정하였고, 미세유체 채널에 각기 다른 농도의 에탄올이 흐를 때 공진 주파수가 이동하는 것을 확인하였다. 또한, 시뮬레이션과 측정 결과 사이에 높은 일치율을 보인다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.551-555
• /
• 2010

Electrowetting is a versatile tool to handle tiny droplets and forms a backbone of digital microfluidics. Numerical analysis is necessary to fully understand the dynamics of electrowetting, especially in designing electrowetting-based devices, such as liquid lenses and reflective displays. We developed a numerical method to analyze the general contact-line problems, incorporating dynamic contact angle models. The method is based on the conservative level set method to capture the interface of two fluids without loss of mass. We applied the method to the analysis of spreading process of a sessile droplet for step input voltages and oscillation of the droplet for alternating input voltages in electrowetting. The result was compared with experimental data. It is shown that contact line friction significantly affects the contact line motion and the oscillation amplitude. The pinning process of contact line was well represented by including the hysteresis effect in the contact angle models. In level set method, in the mean time, material properties are made to change smoothly across an interface of two materials with different properties by introducing an interpolation or smoothing scheme. So far, the weighted arithmetic mean (WAM) method has been exclusively adopted in level set method, without complete assessment for its validity. We viscosity, thermal conductivity, electrical conductivity, and permittivity, can be an alternative. I.e., the WHM gives more accurate results than the WAM method in certain circumstances. The interpolation scheme should be selected considering various characteristics including type of property, ratio of property of two fluids, geometry of interface, and so on.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.710-716
• /
• 2006

Micro-PIV system with a high speed CCD camera is used to measure the flow field near the advancing meniscus of a water slug in microchannels. Image shifting technique combined with meniscus detecting technique is proposed to measure the relative velocity of the liquid near the meniscus in a moving reference frame. The proposed method is applied to an advancing front of a slug in microchannels with rectangular cross section. In the case of hydrophilic channel, strong flow from the center to the side wall along the meniscus occurs, while in the case of the hydrophobic channel, the fluid flows in the opposite direction. Further, the velocity near the side wall is higher than the center region velocity, exhibiting the characteristics of a strong shear-driven flow. This phenomenon is explained to be due to the existence of small gaps between the slug and the channel wall at each capillary corner so that the gas flows through the gaps inducing high shear on the slug surface. Simulation of the shape of a static droplet inside a cubic cell obtained by using the Surface Evolver program is supportive of the existence of the gap at the rectangular capillary corners. The flow fields in the circular capillary, in which no such gap exists, are also measured. The results show that a similar flow pattern to that of the hydrophilic rectangular capillary (i.e., center-to-wall flow) is always exhibited regardless of the wettability of the channel wall, which is also indicative of the validity of the above-mentioned assertion.

• Korea-Australia Rheology Journal
• /
• 제19권3호
• /
• pp.157-164
• /
• 2007

Microencapsulation of cells within microfluidic devices enables explicit control of the membrane thickness or cell density, resulting in improved viability of the transplanted cells within an aggressive immune system. In this study, living cells (3T3 and L929 fibroblast cells) are encapsulated within a semi-permeable membrane (calcium crosslinked alginate gel) in two different device designs, a flow focusing and a core-annular flow focusing geometry. These two device designs produce a bead and a long microfibre, respectively. For the alginate bead, an alginate aqueous solution incorporating cells flows through a flow focusing channel and an alginate droplet is formed from the balance of interfacial forces and viscous drag forces resulting from the continuous (oil) phase flowing past the alginate solution. It immediately reacts with an adjacent $CaCl_2$ drop that is extruded into the main flow channel by another flow focusing channel downstream of the site of alginate drop creation. Depending on the flow conditions, monodisperse microbeads of sizes ranging from $50-200\;{\mu}m$ can be produced. In the case of the microfibre, the alginate solution with cells is extruded into a continuous phase of $CaCl_2$ solution. The diameter of alginate fibres produced via this technique can be tightly controlled by changing both flow rates. Cell viability in both forms of alginate encapsulant was confirmed by a LIVE/DEAD cell assay for periods of up to 24 hours post encapsulation.