• 한국기계연구소 소보
• /
• s.18
• /
• pp.67-74
• /
• 1988

The force sensor is essentially required in controlling robot manipulator in such applications as precise assembly of mechanical parts, deburring and polishing and various kinds of 6-axis force sensors are developed for these application. This paper presents the algorithm of horizontal assembly of circular cross-sectional workpiece using 3-axis force sensor and procedure to develop the sensor. The sensor is calibrated and tested using AID converter and 16 bit micro computer. The result is $\pm$0.03% FS of zero stability, 0.1%FS of linearity and $\pm$0.05% FS of resolution. The sensor will be used in the research of robot application such as assembly and deburring interfaced with micro computer based robot controller which is under development at the robotics lab.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.32-38
• /
• 2008

This paper describes a fast tool control (FTC)-based diamond turning process for fabricating large-area high-quality micro-lens arrays. The developed FTC unit has a stroke of $48{\mu}m$ and a resonance frequency of 4.9 kHz. Micro-lens arrays were fabricated using a micro-cutting tool with a nose radius of $50{\mu}m$. The FTC unit was integrated with a force sensor so that the initial position of the micro-cutting tool with respect to the workpiece surface could be detected through monitoring the contacting force. The length and depth of the designed parabolic micro-lens profile were $190{\mu}m$ and $20{\mu}m$, respectively. A micro-lens array was fabricated on a cylinder surface over an area of ${\phi}55 mm{\times}40 mm$.

• Journal of Sensor Science and Technology
• /
• v.11 no.4
• /
• pp.191-199
• /
• 2002

This paper presents the design concept, theoretical investigation, and fabrication of a six-degree of freedom (6-DOF) turbulent flow micro sensor utilizing the piezoresistive effect in silicon. Unlike other flow sensors, which typically measure just one component of wall shear stress, the proposed sensor can independently detect six components of force and moment on a test particle in a turbulent flow. By combining conventional and four-terminal piezoresistors in Si (111), and arranging them suitably on the sensing area, the total number of piezoresistors used in this sensing chip is only eighteen, much fewer than the forty eight piezoresistors of the prior art piezoresistive 6-DOF force sensor.

• Journal of Mechanical Science and Technology
• /
• v.20 no.5
• /
• pp.668-674
• /
• 2006

In order to develop a cell based robot, we present a micro-mechanical force measurement system for the biological muscle actuators, which utilize glucose as a power source. The proposed measurement system is composed of a micro-manipulator, a force transducer with a glass probe, a signal processor, an inverted microscope and video recording system. Using this measurement system, the contractile force and frequency of the cardiac myocytes were measured in real time and the magnitudes of the contractile force of each cardiac myocyte under different conditions were compared. From the quantitative experimental results, we could estimate that the force of cardiac myocytes is about $20\sim40{\mu}N$, and show that there are differences between the control cells and the micro-patterned cells.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.109.1-109
• /
• 2002

This paper presents a macro/micro flip chip mounting head system for precise force control. In the proposed macro/ micro system, the macro actuator is conventional do servomotor with a ball screw mechanism and the micro actuator is a voice coil motor(VCM) that consists of four NdFeB magnets and a winded moving coil. For force control, a sensitive strain-gauge force sensor is mounted in the micro actuator. Through harmonic motion between macro and micro actuator, we would like to get precise contact force control when small sized flip chip is mounted on flexible substrate in high speed. In order to show the effectiveness of the proposed macro/micro flip chip mounting head system, we com...

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.9 s.252
• /
• pp.1160-1165
• /
• 2006

In this paper, the 2-dimensional uniaxial force sensors array is introduced to detect the distributed force using fiber Bragg gratings. Uniaxial force transducer was designed to avoid the chirping and micro bending which degrade the performance of the sensor. The Brags wavelength shift of the sensor was estimated using the finite element analysis. Using this uniaxial force sensor, the uniaxial force sensors array $(3{\times}3)$ was fabricated, and the Performance of this sensors array was evaluated. The Presented sensors may has very simple configuration and its wiring is very simple compared with any other force sensors arrays.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.104-111
• /
• 2003

Micro force measurement is required more frequently for a precision manufacturing and investment in fields of precision industries such as semiconductor, chemistry and biology, and so forth. Null balance method has been introduced as an alternative of a loadcell. Loadcells have advantages in aspects of low cost and easy manufacturing, but have also the limitation in resolution and sensitivity to environment variations. In this paper, null balance method is explained and the dominant parameters related to system performances are mentioned. Null position sensor, electromagnetic system and controller are investigated. Also, the characteristic experiment is carried out in order to estimate the resolution and the measurement range. In order to overcome the limitation by the drift of position sensor and the performance of controller, double electromagnetic force compensation method is proposed and experimented. After controlling and filtering, the resolution under $\pm$ 1mg and measurement range over 300g could be obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.7-12
• /
• 2002

• Ceramist
• /
• v.7 no.3
• /
• pp.38-47
• /
• 2004

최근 micro structure, micro sensor, micro actuator 및 microelectronics 등을 활용하는 microelectromecha-nical systems (MEMS) 기술은 마이크로 로봇, micro manipulation, 광학 소자 및 시스템, 유체, 열, 바이오 및 화학공정 등을 위한 시스템 그리고 atomic force와 scanning tunneling microscope 등에 사용되는 다양한 소자 등 많은 잠재력을 가지고 있다. 이들 응용 분야 들은 micro actuator와 같은 mechanical power source가 요구되는 경우가 있다. 압전 특성을 포함하는 강유전체 재료는 이러한 micro actuator를 위해 여러 가지 다양한 장점을 지니고 있는데, 이들을 정리하면 다음과 같다. (중략)

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.1
• /
• pp.23-31
• /
• 2002

We proposed a concept of a desktop micro device factory for visually servoed teleoperated microassembly assisted by a virtual reality (VR) interface. It is composed of two micromanipulators equipped with micro tools operating under a light microscope. First a manipulator, control method for the micro object to follow a planned trajectory in pushing operation is proposed undo. vision based-position control. Then, we present the cooperation control strategy of the micro handling operation under vision-based force control integrating a sensor fusion framework approach. A guiding-system based on virtual micro-world exactly reconstructed from the CAD-CAM databases of the real environment being considered is presented for the imprecisely calibrated micro world. Finally, some experimental results of microassembly tasks performed on millimeter-sized components are provided.