• 한국안전학회지
• /
• 제19권1호
• /
• pp.38-43
• /
• 2004

Many analysis methods, including finite element method, have been suggested and used for assessing the integrity of cracked structures. In the paper, in order to analyze arbitrary three dimensional cracks, the finite element alternating method is extended. The crack is modeled by the symmetric Galerkin boundary element method as a distribution of displacement discontinuities, which is formulated as singularity-reduced integral equations. And the finite element method is used to calculate the stress values for the uncracked body only. Applied the proposed method to several example problems for planner cracks in finite bodies, the accuracy and efficiency of the method were demonstrated.

• 한국소음진동공학회논문집
• /
• 제12권2호
• /
• pp.141-149
• /
• 2002

Although the finite element method has become an indispensible tool for the dynamic analysis of structures, difficulty remains to quantify the errors associated with discretization. To improve the modeling accuracy, this paper proposes a method to make a combined use of finite elements and exact dynamic elements. Exact interpolation functions for the Timoshenko beam element are derived using the exact dynamic element modeling (EDEM) and compared with interpolation functions of the finite element method (FEM). The exact interpolation functions are tested with the Laplace variable varied. A combined use of finite element method and exact interpolation functions is presented to gain more accurate mode shape functions. This paper also presents a combined use of finite elements and exact dynamic elements in design/reanalysis problems. Timoshenko flames with tapered sections are tested to demonstrate the design procedure with the proposed method. The numerical study shows that the combined use of finite element model and exact dynamic element model is very useful.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권2호
• /
• pp.76-82
• /
• 2018

본 논문에서는 지점부 경계조건을 고려하여 단순보의 유한요소모델을 개선하는 기법을 제안하였다. 기존의 유한요소모델개선 기법은 주로 가속도 응답으로부터 추정된 동특성(고유진동수, 모드형상)을 이용하여 유한요소모델을 개선하였다. 이렇게 개선된 유한요소모델은 실제 구조물의 정적응답을 예측하기 어렵고, 잘못된 구조물의 물성치를 추정하는 문제가 발생한다. 제안된 기법은 먼저, 구조물의 처짐과 지점부 회전변위를 계측하여 지점부 경계조건을 간략화한 유한요소모델의 회전 스프링 강성을 정량적으로 추정한다. 회전 스프링 강성이 개선된 유한요소모델과 구조물의 동특성을 사용하여 구조물의 물성치를 추정함으로써 최종 개선된 유한요소모델을 구축된다. 제안된 유한요소모델 개선 기법과 기존 유한요소모델개선 기법을 수치해석 시뮬레이션을 통하여 비교 및 검증하였다.

• East Asian mathematical journal
• /
• 제32권5호
• /
• pp.729-744
• /
• 2016

A Crank-Nicolson characteristic finite element method is introduced to construct approximate solutions of a Sobolev equation with a convection term. The higher order of convergences in the temporal direction and in the spatial direction in $L^2$ normed space are verified for the Crank-Nicolson characteristic finite element method.

• Journal of Welding and Joining
• /
• 제21권6호
• /
• pp.71-76
• /
• 2003

For the purpose of clarifying the influence of welding residual stress to the fatigue crack propagations behaviour, an analytical investigation based on finite element method is performed to examine the opening behaviour of tip-closed crack in the compressive residual stress. A finite element model comprised of contact elements for the crack plane and plane stress elements for the base material is used to evaluate crack opening stress of the crack existing in the residual stress field. Also an analytical method based on the superposition principle to estimate the length of opened part of tip closed crack and the stress distribution adjacent to the crack during uploading is applied to the finite element model. The software for the analysis is ABAQUS, which is a general purpose finite element package. The results show that stresses distributed on the crack surfaces are reduced and approached to zero as the applied stresses are increased up to crack tip opening stress and no mechanical discontinuity is found at the boundary of contact elements and plane stress elements. It is verified that the opening behavior of the fatigue crack in the residual stress can be predicted by finite element method with the proposed analytical method.

• 대한기계학회논문집A
• /
• 제31권10호
• /
• pp.1009-1016
• /
• 2007

Finite element alternating method has been suggested and used effectively to obtain the fracture parameters in assessing the integrity of cracked structures. The method obtains the solution from alternating independently between the FEM solution for an uncracked body and the crack solution in an infinite body. In the paper, the finite element alternating method is extended in order to obtain the elastic-plastic stress fields of a three dimensional inner crack. The three dimensional crack solutions for an infinite body were obtained using symmetric Galerkin boundary element method. As an example of a three dimensional inner crack, a penny-shaped crack in a finite body was analyzed and the obtained elastc-plastic stress fields were compared with the solution obtained from the finite element analysis with fine mesh. It is noted that in the region ahead of the crack front the stress values from FEAM are close to the values from FEM. But large discrepancy between two values is observed near the crack surfaces.

• Structural Engineering and Mechanics
• /
• 제17권6호
• /
• pp.735-749
• /
• 2004

This work presents a direct integration scheme, based on a fourth order finite difference approach, for elastodynamics. The proposed scheme was chosen as an alternative for attenuating the errors due to the use of the central difference method, mainly when the time-step length approaches the critical time-step. In addition to eliminating the spurious numerical oscillations, the fourth order finite difference scheme keeps the advantages of the central difference method: reduced computer storage and no requirement of factorisation of the effective stiffness matrix in the step-by-step solution. A study concerning the stability of the fourth order finite difference scheme is presented. The Finite Element Method and the Boundary Element Method are employed to solve elastodynamic problems. In order to verify the accuracy of the proposed scheme, two examples are presented and discussed at the end of this work.

• 오토저널
• /
• 제10권6호
• /
• pp.54-60
• /
• 1988

During recent years, a great deal of interest has emerged on the use of adaptive approaches and a posteriori estimates in finite element method. The results are intended to be used to improve the quality of finite element solution by changing the location of the nodes within a fixed number of degrees of freedom-so called r method-, and by increasing the order of polynomial approximation with the new degrees of freedom-p method. This paper deals with error analysis that contains the basic theory and method of deriving error estimates and adaptive processes applied to finite element solutions underlying the rpm method that is the combination of r and p method of finite element. It is shown that we can obtain more accurate solution by applying the method to the 2-dimensional heat transfer problem.

• 대한전기학회논문지
• /
• 제36권6호
• /
• pp.396-402
• /
• 1987

A Composite method of finite element and boundary integral methods is introduced to solve the magnetostatic field problems with open boundary. Only the region of prime interest is taken as the compution region where the finite element method is applied. The boundary conditions of the region are dealt with using boundary integral method. The boundary integration in the boundary integral method is done by numerical and analytical techniques repectively. The proposed method is applied to a simple linear problem, and the results are compared with those of the finite element method and the analytic solutions. It is concluded that the proposed method gives more accurate results than the finite element method under the same computing efforts.

• Structural Engineering and Mechanics
• /
• 제4권3호
• /
• pp.209-226
• /
• 1996

One of the major divisions in the mathematical modelling of a tubular structure is to include the effect of the transverse shear stress and rotary inertia in vibration of members. During the past three decades, problems of vibration of tubular structures have been considered by some authors, and special attention has been devoted to the Timoshenko theory. There have been considerable efforts, also, to apply the method of spectral analysis to vibration of a structure with rectangular section beams. The purpose of this paper is to compare the results of the spectrally formulated finite element analyses for the Timoshenko theory with those derived from the conventional finite element method for a tubular structure. The spectrally formulated finite element starts at the same starting point as the conventional finite element formulation. However, it works in the frequency domain. Using a computer program, the proposed formulation has been extended to derive the dynamic response of a tubular structure under an impact load.