• 한국주조공학회지
• /
• 제43권1호
• /
• pp.3-10
• /
• 2023

본 연구는 다이캐스팅 과정 중 발생될 수 있는 비철금속 가공품 내부의 기공 결함을 검출할 수 있는 기술 개발을 위해 진행되었다. 해당 연구를 통해 제품 내부에 발생 가능한 기공을 사전에 검출하여 불량 생산품의 유통을 사전에 차단하고 나아가 유통된 제품의 파손으로 발생 가능한 손실을 감소시키는데 기여하고자 한다.

• Bulletin of the Korean Chemical Society
• /
• 제26권4호
• /
• pp.515-522
• /
• 2005

Enzyme-metal combo catalysis is described as a useful methodology for the synthesis of optically active compounds. The key point of the method is the use of enzyme and metal in combination as the catalysts for the complete transformation of racemic substrates to single enantiomeric products through dynamic kinetic resolution (DKR). In this approach, enzyme acts as an enantioselective resolving catalyst and metal does as a racemizing catalyst for the efficient DKR. Three kinds of enzyme-metal combinations - lipase-ruthenium, subtilisin-ruthenium, and lipase-palladium –have been developed as the catalysts for the DKRs of racemic alcohols, esters, and amines. The scope of the combination catalysts can be extended to the asymmetric transformations of ketones, enol acetates, and ketoximes via the DKRs. In most cases studied, enzyme-metal combo catalysis provided enantiomerically-enriched products in high yields.

• 한국식품위생안전성학회지
• /
• 제17권4호
• /
• pp.178-182
• /
• 2002

전국 폐광지역(48곳) 평야지역(8곳) 농산물(280건), 토양(280건), 농경수(48건)를 채취하여 수은 함량은 Mercury analyzer로, 납, 카드뮴, 비소 등 중금속은 습식분해후 ICP, AAS등으로 분석하였다. 본 연구결과, 평야지역에 비해 폐광산지역의 토양에 있어 크롬을 제외한 수은, 납 등 중금속 함량이 더 높았으며 농경수에 있어서는 수은을 제외한 다른 중금속함량이 더 높았다. 폐광산지역의 농산물중 납, 카드뮴 등 중금속 함량은 평야지역에 비해 대체로 높은 편이었으나 구리 함량은 평야지역의 농산물이 다소 높았다. 토양과 농산물중 납 등 중금속함량간의 유의적인 상관관계는 관찰되지 않았다(p>0.05). 앞으로도 식품의 안전성 확보 및 국민건강증진차원에서 폐광산지역의 토양, 농산물중 중금속 함량에 대한 모니터링 사업이 지속적으로 수행되어야 할 것으로 사료된다.

• Corrosion Science and Technology
• /
• 제13권5호
• /
• pp.195-203
• /
• 2014

Modern industry has a wide variety of application areas such as ocean industry, construction and automobile industry. With the current circumstances, the need for anti-corrosion technology that can be used on materials to withstand in harsh environments, is increasing. In this study, we have sought to develop a metal coating technology with zinc and aluminum powders as a potential anti-corrosion material. To make a coating on metal products, a thermal diffusion coating method was used under the conditions of $350^{\circ}C$ for 30 minutes. Optical microscope, Field emission scanning electron microscope (FE-SEM&EDX) and X-ray diffraction analysis were used to analyze a coating layer. As a result, we have confirmed that the generated amount of rust on metal parts coated with thermal diffusion coating method decreased dramatically compared with non-coated metal parts. Furthermore, the anti-corrosion performance was evaluated according to the different ratio of zinc and aluminum. Finally, we confirmed the possibility of application and commercialization of our coating technique on metal parts used in harsh industrial based on the results of these performance.

• 한국가구학회지
• /
• 제27권4호
• /
• pp.392-398
• /
• 2016

Wood-plastic composites (WPCs) composed of mainly wood flour and thermoplastics have attracted considerable attentions due to advantages of cost effectiveness, high durability, and microbial resistance. However, relatively poor fire resistance of WPCs from low thermal stability of wood and plastics prevents further uses. This study investigated the effect of expandable graphite (EG) and aluminium hydroxide (AH)/magnesium hydroxide (MH) on the properties of WPCs. The combined incorporation of both EG and metal hydroxide (i.e., AH or MH) into formulations leads to higher flexural modulus of filled composites compared to neat PP and WPC. In thermal properties, EG played an important role in improving thermal stability of filled composites by suppressing thermal decompositions of wood and PP. Moreover, EG showed better water absorption features. From this research, it can be said that EG and metal hydroxides have potentials as effective reinforcement, flame retardant, and moisture barrier.

• 한국분말재료학회지
• /
• 제23권4호
• /
• pp.325-330
• /
• 2016

Owing to increasing demand of rare metals present in ICT products, it is necessary to promote the rare metal recycling industry from an environmental viewpoint and to prevent climate change. Despite the fact that information for toxic substances is partly indicated, a legal basis and an international standard indicating usage of rare metals is insufficient. In order to address this issue, a newly created study group of environment and climate change at the ITU (International Telecommunication Union) is doing research to develop methodologies for recycling rare metals from ICT products in an eco-friendly way. Under this group, the Republic of Korea has established two international standards related to rare metals present in ICT products. The first is 'Release of rare metal information for ICT products (ITU-T L.1100)' and the other is 'Quantitative and qualitative analysis methods for rare metals (ITU-T L.1101)'. A new proposal for recommending the provision of rare metal information through a label by manufacturers and consumer/recycling businesses has been approved recently and is supposed to be published later in 2016. Moreover, these recommendations are also being extended to IEC, ISO and other standardization organizations and a strategy to reinforce the ability for domestic standardization is being established in accordance with industrial requirements. This will promote efficient recycling of rare metals from ICT products and will help improve the domestic supply of rare metals.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.201-207
• /
• 2014

This study is aimed to improve safety of ladle in the metal products manufacturing industry. Burns may occur from spills, spatters or eruptions of hot metal from ladles during pouring or transporting. According to the statistics of occupational accidents about the ladle, many victims were exposed to or contacted with extreme temperatures. The many fatal injuries occurred as a result of unexpected discharging of molten metal due to tipping over ladles. To prevent ladles from turning over, the trunnion axis shall be located below the center of gravity of the ladle at all operating condition. For this purpose, the equation is proposed to calculate the minimum location of a trunnion axis for definite static stability when tilting.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.250-253
• /
• 1998

The kinematically admissible velocity field is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric plane dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric plane dies is caused by the eccentricity of plane dies. The axial velocity distribution in the plane dies is divided in to the uniform velocity and the deviated velocity. The deviated velocity is linearly changed with the distance from the center of cross-section of the workpiece. The results show that the curvature of products and the shapes of the dead metal zone are determined by the minimization of the plastic work and that the curvature of the extruded products increases with the eccentricity.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.80-83
• /
• 1999

Rigid Plasticity Finite Element Analysis is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric square dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric square dies is caused by the eccentricity of square dies. The deviated velocity is changed with the distance form the center of cross-section of the workpiece. The results show that the curving of products and the shapes of the dead metal zone are determined by Rigid Plasticity Finite Element Analysis and that the curvature of the extruded products increases with the eccentricity.

• 소성∙가공
• /
• 제8권5호
• /
• pp.465-470
• /
• 1999

Many researchers have, nowadays, studied on spinning which can produce highly qualified products by CNC spinning machine equipped with hydraulic devices. The products have continuous metal flow which improves fatigue life, yield point, tensile strength and hardness. This study is to investigate the influence of various working conditions on the spinnability of cylindrical cups such as feed rate(ν), feed pitch(p), angle of roller holder(α), and the inclination angle of first roller path. Through experiments the feed rate of (0.4∼0.7) mm/rev was shown to give the drawing ratio of 2.5 when the angle of roller holder was 5°, However, by increasing the angle of roller holder from 5°to 20°, the range of feed rate which can produce deeper cups became wider and the spinnability was also improved. The optimum working conditions, for the maximum formability of aluminum sheet metal as well as dimensional accuracy of spun cups, are presented and discussed.