• 한국해양공학회지
• /
• 제27권5호
• /
• pp.77-81
• /
• 2013

The effects of the welding parameters, contact tip-to-workpiece distance (CTWD), current, and voltage on the diffusible hydrogen content in weld metal deposited by self-shielded flux cored arc welding were investigated and rationalized by comparing the amount of heat generated in the extension length of the wire. This showed that as CTWD increased from 15mm to 25mm, the amount of heat generated was increased from 71.1J to 174.8J, and the hydrogen content was decreased from 11.3mL/100g to 5.9mL/100 g. Even if little difference was observed in the amount of heat generated, the hydrogen content was increased with an increase in voltage because of the longer arc length. A regression analysis showed that the regression coefficient of voltage in self-shielded flux cored arc welding is greater than that in $CO_2$ arc welding. This implies that voltage control is more important in self-shielded flux cored arc welding than in $CO_2$ arc welding.

• 한국환경과학회지
• /
• 제7권5호
• /
• pp.623-631
• /
• 1998

Pyrite contained in wasted ore dumps induces a strong acid environment when it contacts oxygenated rainfall. Present research was designed to evaluate the pollution of an area that is supposedly contaminated by pyrite of ore wasted dumps form in Chonju Il Mine. Measured are the pH and selected heavy metal elements in the supposedly polluted hydrologic system. The samples include three types : those collected from the stream waters; those from the stream sediments; and those from the rice field soil scattered over the area. The dispersion path of the pollution source was also traced. The pH of the hydrologic system ranged from 3.44 to 5.46, which clearly indicates that the area is on the acid environment. The pH tends to rise as the distance from the minehead increases. The content of heavy metal elements dissolved in the stream water varies as follows; Mn=69.73~1.99ppm, Cd=0.02~0.03ppm, Zn=0.77~1.18ppm, Cu=0.04~0.13ppm, Pb=0.22~0.32ppm. The stream water in this state may induce serious heavy metal pollution to the agricultural land and the water for human life especially in the villages down the stream. The content of heavy metal elements dissolved in the stream sediment varies as follows; Mn=245.0~4685.0ppm, Cd=10.0~15.0ppm, Zn=105.0~210.0ppm, Cu=65.0~155.0ppm, Pb=90.0~150.0ppm. The content of heavy metal elements dissolved in the rice field soil varies as follows; Mn=185.0~260.0ppm, Cd=10.0~15.0ppm, Zn=135.0~180.0ppm, Cu=65.0~90.0ppm, Pb=100.0~130.0ppm. The pollution index in the stream sediment and the rice field sell is 1.36~2.03, which shows that pollution had already begun all over the area where the samples were collected.

• 한국수소및신에너지학회논문집
• /
• 제34권5호
• /
• pp.421-430
• /
• 2023

Fe-Ni-Pt nanocatalysts were loaded on carbon black powders which were synthesized by a spontaneous reduction reaction of iron (II) acetylacetonate, nickel (II) acetylacetonate and platinum (II) acetylacetonate. The morphology and the loading weight of Fe-Ni-Pt nanoparticles were characterized by transmission electron microscopy and thermogravimetric analyzer. The amount of Fe-Ni-Pt catalyst supported on the carbon black surface was about 6.42-9.28 wt%, and the higher the Fe content and the lower the Pt content, the higher the total amount of the metal catalyst supported. The Brunauer-Emmett-Teller Analysis (BET) specific surface area of carbon black itself without metal nanoparticles supported was 233.9 m²/g, and when metal nanoparticles were introduced, the specific surface area value was greatly reduced. This is because the metal nanocatalyst particles block the pore entrance of the carbon black, and thereby the catalytic activity of the metal catalysts generated inside the pores is reduced. From the I-V curves, as the content of the Pt nanocatalyst increased, the electrolytic properties of water increased, and the activity of the metal nanocatalyst was in the order of Pt > Ni > Fe.

• 오토저널
• /
• 제4권2호
• /
• pp.35-46
• /
• 1982

This paper deals with residual stress characteristics of ion-nitrided metal which is primarilly concerned with the effects of added carbon content in gas atmosphere. A small optimal amount of carbon content in gas atmosphere increase compound layer thickness, as well as to increase diffusion layer thickness and hardness. The residual stress and deflection of the specimens was measured in various elevated temperature at the surface of ion-nitrided metal and the internal stress distribution was calculated. It is found that compressive residual stress at the compound layer is largest at the compound layer, and decreases as the depth from the surface increases.

• 한국해양공학회지
• /
• 제22권6호
• /
• pp.41-45
• /
• 2008

Effectsof carbon content on the weldability of B-containing 620 grade high Cr ferritic cast steels were investigated. Cast steel with lower carbon content of 0.07% showed lower HAZ hardness because of the formation of lower carbon martensite in HAZ. It also showed less solidification cracking susceptibility in weld metal because of the formation of delta ferrite. However, hot ductility showed no difference between cast steels with lower and higher carbon contents. Cast steel with lower carbon content showed greater HAZ softening after PWHT in the region heated between AC1 and AC3 because of its higher base metal hardness.

• Journal of the Korean Wood Science and Technology
• /
• 제27권1호
• /
• pp.50-55
• /
• 1999

Since ultrasonic stress wave velocity varies with wood temperature and moisture content, ultrasonic stress wave could be a tool to predict wood moisture content if temperature effect could be eliminated. This temperature effect was investigated by measuring the velocities of ultrasonic stress waves transmitting through air, a metal bar and a dimension lumber at various temperatures. For air the velocity and amplitude of the ultrasonic stress wave increase with temperature, while for a metal bar and a dimension lumber those decrease as temperature increases. However all three materials showed velocity hystereses with a temperature cycle. The effect of temperature and moisture content on stress wave velocity of a dimension lumber was depicted in the form of a three dimensional graph. The plot of stress wave velocity vs. wood moisture content was well fitted by two regression equations: a exponential equation below 46% and a linear equation above 46%.

• Journal of Welding and Joining
• /
• 제30권4호
• /
• pp.49-54
• /
• 2012

The microstructure and mechanical properties of the high-strength low-alloy steel weld metals with a variation of nickel content were investigated. The weld metals with a variation of nickel content from 2.3 to 3.3 wt% were prepared using Gas Metal Arc Welding process. The amount of acicular ferrite decreased with increasing nickel content; this is accompanied with an increase in the region of bainite and martensite, hence the hardness and tensile strengths were increased with the increase in nickel content, whereas the impact energy was deteriorated.

• 한국식생활문화학회지
• /
• 제27권1호
• /
• pp.75-81
• /
• 2012

This study was conducted to investigate the physiological activity of acai berry (Euterpe oleracea Mart.) extracts from three different solvents (water, methanol, and ethanol). We measured total polyphenol and total flavonoid content, DPPH radical scavenging activity, nitrite scavenging activity, metal chelating effect, and reducing power. The extraction yield from water, methanol, and ethanol was 17.10, 9.50, and 37.51%, respectively. The highest total polyphenol content (10.54 mg/100 g) and total flavonoid contents (1.88 mg/100 g) was observed in water extract. DPPH radical scavenging activity was the highest in both water extract (72.03%) and methanol extract (74.79%) at levels of 5 mg/mL, which was similar to that of BHT (78.90%). Water extract yielded the highest metal chelating effect (92.54%) and reducing power (1.09) at levels of 5 mg/mL. Taken together, these findings suggest that extracts of acai berry can be used as functional food materials with antioxidative and nitrite scavenging activities.

• 한국식품영양과학회지
• /
• 제19권2호
• /
• pp.187-193
• /
• 1990

Ganoderma lucidum has been widely used not only as ingredients in herbal medicine but also in pharmacological soft drinks. The author collected for analysis of content of 8 kinds of heavy metal(Cd, pb, Hg, Cu, Mn, Fe, As) in soil and cluture soil in an around the Taegu area including Sang Ju, Non Gong, Keum Ho, and Weol Bae. THe toxic content in Gaoderma lucidum showed relatively low level as in cadmium lead mercury arsenic : 0.8-0.13ppm 0.17-1.43ppm 0.02-0.32ppm 0.01-0.19ppm respectively : in copper mangenese zinc and iron : 0.93-4.29ppm, 0.37-2.18ppm 1.02-1.65ppm, 4.57-11.04ppm those grown in soil showed higher percentages of content than those grown on logs in lead copper zinc and iron by 43.2% 68.6%, 20.3% and 43.2% respectively. The content of heavy metals in those grown in soil and culture soil tended to be higher in the areas near factories of industrial complexes especially in manganese and iron. The content of heavy metals in soil and culture soil appeared lower than the mean values of Korean Soil. No interrelationship was found in the content of heavy metals between those of Ganoderma lucidum grown on logs and those grown in soil. In case of pot cultivation however the mushroom spawns are grown originally in soil which seems to influence the degree of content of heavy metals of media.

• 한국분말재료학회지
• /
• 제3권1호
• /
• pp.49-56
• /
• 1996

The effect of$H_{2}/N_{2}$gas sintering atmosphere on the carbon content and mechanical properties during the metal injection molding process of carbonyl iron-nickel powder was studied. The carbon content of the specimen after debinding in the pure$N_{2}$atmosphere appeared 0.78 wt%. After showing the maximum value of 1.48 wt.% in the debinding atmosphere of 10%$H_{2}/N_{2}$gas mixture, the carbon content of the debinded specimen decreased gradually with increasing the$H_2$content in the$H_{2}/N_{2}$gas mixture. The carbon contents of the sintered specimen were 0.46~0.63wt% in Na gas atmosphere, while they appeared extremely low above 40%$H_{2}/N_{2}$gas atmosphere. The relative sintered density increased abruptly from 88~90% to 93~96% with the addition of Ni, while the density nearly unchanged above 2% Ni addition. The sintered density increased with increasing the fraction of$H_{2} in H_{2}/N_{2}$gas mixture. Tensile strength and hardness increased, and elongation decreased with increasing carbon and Ni content. In spite of high carbon content of 0.63 wt%, the superior elongation value of 10% was shown.