• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.8
• /
• pp.593-601
• /
• 2012

Ordered mesoporous oxide films have been focused because of their low density, high interior specific surface area, and high thermal insulation. Specially, the ordered mesoporous oxide films prepared by self-assembly has many advantages due to easy process and high reproducibility. In this work, ordered mesoporous $SiO_2$, $Al_2O_3$, and $TiO_2$ films were synthesized by control of composition and processing parameter. Also, their structural, thermal, and mechanical properties were characterized variously. In conclusion, ordered mesoporous oxides will be one of core materials in new technology due to their excellent and unique properties.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.415-418
• /
• 2010

Highly ordered mesoporous silver material was successfully synthesized from a mesoporous silica template (KIT-6) with 3-D channel structure using the nano-replication method. The effects of $H_2$ or $O_2$ pretreatments on the catalytic performance of the mesoporous silver were investigated using a temperature programmed CO oxidation technique in a fixed bed reactor. The mesoporous silver material that was pretreated with $H_2$ exhibited an excellent catalytic activity compared to the as-prepared and $O_2$-pretreated catalysts. Moreover, this present mesoporous silver material showed good catalytic stability. For the CO oxidation, the apparent activation energy of the $H_2$-pretreated mesoporous silver catalyst was $61{\pm}0.5\;kJ\;mol^{-1}$, which was also much lower than the as-prepared ($132{\pm}1.5\;kJ\;mol^{-1}$) and $O_2$-pretreated ($124{\pm}1.4\;kJ\;mol^{-1}$) catalysts.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.6
• /
• pp.808-816
• /
• 2006

Among the many forms of mesoporous materials, thin films are important for the potential applications of this class of materials. Compared with the powder forms, however, there has been relatively little work done on thin films probably because of the lack of suitable and generalized synthetic mechanisms established. In this account, we will review the issues on mesoporous thin films with emphasis on the necessity of forming films with accessible pores from the film surfaces and on mesoporous thin films with metal oxides other than silica. Various methods that have been tried to utilize mesoporous thin films with accessible pores as templates for the synthesis of nanostructured materials are reviewed with the emphasis on the advantages of the electrochemical deposition technique.

• Journal of Adhesion and Interface
• /
• v.21 no.3
• /
• pp.113-122
• /
• 2020

Mesoporous materials are a sort of promising materials with a wide spectrum of applications due to their unique well-defined porous structures that provide high surface area and controllable pore size. Among mesoporous materials, periodic mesoporous organosilicas (PMOs) are highly emerging materials in sense of applications due to their large pore sizes and organic functionality in the frame. The organic functional groups in the frameworks of these solids allow tuning of the surface properties and modification of the bulk properties of the material. This article provides a comprehensive overview of PMOs and discusses their different functionalities, morphology and applications, such as catalysis, environmental applications, and adsorption, for which PMOs have been used after their discovery. The review article will provide fundamental understanding of PMOs and their advanced applications to readers.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.449-453
• /
• 2009

A mesoporous assembly of layered titanate with well-dispersed Pt cocatalysts has been synthesized via a restacking of exfoliated titanate nanosheets and a simultaneous adsorption of Pt nanoparticles. According to powder X-ray diffraction analysis, the obtained mesoporous assembly shows amorphous structure corresponding to the disordered stacking of layered titanate crystallites. Field emission-scanning electron microscopy and $N_2$ adsorption-desorption isotherm measurement clearly demonstrate the formation of mesoporous structure with expanded surface area due to the house-of-cards type stacking of the titanate crystallites. From high resolution-transmission electron microscopy and elemental mapping analyses, it is found that Pt nanoparticles with the size of ~2.5 nm are homogeneously dispersed in the mesoporous assembly of layered titanate. In comparison with the protonated titanate, the present mesoporous assembly of layered titanate exhibits better photocatalytic activity for the photodegradation of organic molecules. This finding underscores that the restacking of exfoliated nanosheets is quite useful not only in creating mesoporous structure but also in improving the photocatalytic activity of titanium oxide.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1562-1566
• /
• 2006

Mesoporous silica films with three different pore sizes were prepared by using cationic surfactant, non-ionic surfactant, or triblock copolymer as structure directing agents with tetramethylorthosilicate as silica source in order to control the pore size and wall thickness. They were synthesized by an evaporation-induced self-assembly process and spin-coated on Si wafer. Mesoporous silica films with three different pore sizes of 2.9, 4.6, and 6.6 nm and wall thickness ranging from $\sim$1 to $\sim$3 nm were prepared by using three different surfactants. These materials were optically transparent mesoporous silica films and crack free when thickness was less than 1 m m. The photoluminescence spectra found in the visible range were peaked at higher energy for smaller pore and thinner wall sized materials, consistent with the quantum confinement effect within the nano-sized walls of the silica pores.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.49-49
• /
• 2002

A strategy for the synthesis of more stable and large periodic mesoporous organo-silica materials has been developed for the 2D hexagonal mesoporous organosilica by the core-shell approach using nonionic PEO-PLGA-PEO triblock copolymer templates. The BET surface area of the solvent-extracted hexagonal mesoporous organosilica is estimated to be 1,016 ㎡/g and the pore volume, pore diameter, and wall thickness are 1.447 ㎤/g, 65 Å, and 43 Å, respectively. More hydrophobic PLGA block than the PPO block used for templates of mesoporous silica proves to be quite effective in confining the organosilicates within the PEO phase. Reaction temperature and acid concentration of an initial solution as well as the chemical nature of the bloc k copolymer templates also demonstrate to be important experimental parameters for ordered organosilica mesophase. Moreover, the mesoporous organosilicas prepared with the PEO-PLGA-PEO block templates maintain their structural integrity for up to 25 days in boiling water at 100℃. The mesoporous materials with large pores and high hydrothermal stability prepared in this study has a potential for many applications.

• Korean Journal of Materials Research
• /
• v.27 no.11
• /
• pp.617-623
• /
• 2017

Mesoporous carbon nanofibers as electrode material for electrical double-layer capacitors(EDLCs) are fabricated using the electrospinning method and carbonization. Their morphologies, structures, chemical bonding states, porous structure, and electrochemical performance are investigated. The optimized mesoporous carbon nanofiber has a high sepecific surface area of $667m^2\;g^{-1}$, high average pore size of 6.3 nm, and high mesopore volume fraction of 80 %, as well as a unifom network structure consiting of a 1-D nanofiber stucture. The optimized mesoporous carbon nanofiber shows outstanding electrochemical performance with high specific capacitance of $87F\;g^{-1}$ at a current density of $0.1A\;g^{-1}$, high-rate performance ($72F\;g^{-1}$ at a current density of $20.0A\;g^{-1}$), and good cycling stability ($92F\;g^{-1}$ after 100 cycles). The improvement of the electrochemical performance via the combined effects of high specific surface area are due to the high mesopore volume fraction of the carbon nanofibers.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2271-2275
• /
• 2013

We report on the photoelectrochemical properties of partially reduced mesoporous titania thin films. The fabrication is achieved by synthesizing mesoporous titania thin films through the self-assembly of a titania precursor and a block copolymer, followed by aging and calcination, and heat-treatment under a $H_2$ (1 torr) environment. Depending on the temperature used for the reaction with $H_2$, the degree of the reduction (generation of oxygen vacancies) of the titania is controlled. The oxygen vacancies induce visible light absorption, and decrease of resistance while the mesoporosity is practically unaltered. The photoelectrochemical activity data on these films, by measuring their photocurrent-potential behavior in 1 M NaOH electrolyte under AM 1.5G 100 mW $cm^{-2}$ illumination, show that the three effects of the oxygen vacancies contribute to the enhancement of the photoelectrochemical properties of the mesoporous titania thin films. The results show that these oxygen deficient $TiO_2$ mesoporous thin films hold great promise for a solar hydrogen generation. Suggestions for the materials design for improved photoelectrochemical properties are made.

• Korean Journal of Materials Research
• /
• v.20 no.2
• /
• pp.97-103
• /
• 2010

In this study, a new, relatively simple fabrication method for forming a mesoporous $Al(OH)_3$ film on Al substrates was demonstrated. This method, i.e., alkali surface modification, was simply comprised of dipping the substrate in a $5\times10^{-3}$ M NaOH solution at $80^{\circ}C$ for one minute and then immersing it in boiling water for 30 minutes. After alkali surface modification, a mesoporous $Al(OH)_3$ film was formed on the Al substrate, and its chemical state and crystal structure were confirmed by XPS and TEM. According to the results of the XPS analysis, the flake-like morphology after the alkali surface modification was mainly composed of $Al(OH)_3$, with a small amount of $Al_2O_3$. The mesoporous $Al(OH)_3$ layer was composed of three regions: an amorphousrich region, a region of mixed amorphous and crystal domains, and a crystalline-rich region near the $Al(OH)_3$ layer surface. It was confirmed that the stabilization process in the alkali surface modification strongly influenced the crystallization of the mesoporous $Al(OH)_3$ layer.