• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3470-3493
• /
• 2019

IEEE 802.11s-based infrastructure Wireless Mesh Networks (iWMNs) are envisaged as a promising solution to provide ubiquitous wireless Internet access. The limited network capacity is a problem mainly caused by the medium contention between mesh users and the mesh access points (MAPs), which gets worst when the mesh clients employ the Transmission Control Protocol (TCP). To mitigate this problem, we use wireless network coding (WNC) in the MAPs. The aim of this proposal is to take advantage of the network topology around the MAPs, to alleviate the contention and maximize the use of the network capacity. We evaluate WNC when is used in MAPs. We model the formation of coding opportunities and, using computer simulations, we evaluate the formation of such coding opportunities. The results show that as the users density grows, the coding opportunities increase up to 70%; however, at the same time, the coding delay increments significantly. In order to reduce such delay, we propose to adaptively adjust the time that a packet can wait to catch a coding opportunity in an MAP. We assess the performance of moving-average estimation methods to forecast this adaptive sojourn time. We show that using moving-average estimation methods can significantly decrease the coding delay since they consider the traffic density conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.204-209
• /
• 2001

The finite element model for automotive muffler analysis is improved by modifying the boundary condition of outlet and the mesh of finite element model. The model minimizes the difference between transmission loss from analysis and that from experiment. Four different boundary conditions and the four types of finite element model are tested to find out the best one of those. From the case study it is verified that the bevel of transmission loss can be changed by the variation of radiation impedance value. Also the resonance or anti-resonance frequencies of transmission loss can be shifted by the variation of finite element mesh. An improved finite element model of muffler is proposed in consideration with the accuracy and the computing time of analysis.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.2
• /
• pp.121-130
• /
• 2002

The concept of Level Of Detail (LOD) was introduced and has been used to enhance display performance and to carry out certain engineering analysis effectively. We would like to use an adequate complexity level for each geometric model depending on specific engineering needs and purposes. Solid modeling systems are widely used in industry, and are applied to advanced applications such as virtual assembly. In addition, as the demand to share these engineering tasks through networks is emerging, the problem of building a solid model of an appropriate resolution to a given application becomes a matter of great necessity. However, current researches are mostly focused on triangular mesh models and various operators to reduce the number of triangles. So we are working on the multi-resolution of the solid model itself, rather than that of the triangular mesh model. In this paper, we propose multi-resolution representation of B-rep model by reordering and converting design features into an enclosing volume and subtractive features.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.106-114
• /
• 2010

Mesh parameterization is the process of finding one-to-one mapping between an input mesh and a parametric domain. It has been considered as a fundamental tool for digital geometric processing which is required to develop several applications of digital geometries. In this paper, we propose a novel 3D volume parameterization by means that a harmonic mapping is established between a 3D volume mesh and a unit solid cube. To do that, we firstly partition the boundary of the given 3D volume mesh into the six different rectangular patches whose adjacencies are topologically identical to those of a surface cube. Based on the partitioning result, we compute the boundary condition as a precondition for computing a volume mesh parameterization. Finally, the volume mesh parameterization with a low-distortion can be accomplished by performing a harmonic mapping, which minimizes the harmonic energy, with satisfying the boundary condition. Experimental results show that our method is efficient enough to compute 3D volume mesh parameterization for several models, each of whose topology is identical to a solid sphere.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.5
• /
• pp.455-466
• /
• 2006

In this paper, 3D objects is created from the real scene that is used by an active sensor, which gets depth and RGB information. To get the depth information, this paper uses the $Zcam^{TM}$ camera which has built-in an active sensor module. <중략> Thirdly, calibrate the detailed parameters and create 3D mesh model from the depth information, then connect the neighborhood points for the perfect 3D mesh model. Finally, the value of color image data is applied to the mesh model, then carries out mapping processing to create 3D object. Experimentally, it has shown that creating 3D objects using the data from the camera with active sensors is possible. Also, this method is easier and more useful than the using 3D range scanner.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.4
• /
• pp.279-288
• /
• 2005

The mesh selectivity of drum net traps for Buccinum opisoplectum Dall caught in the eastern sea of Korea was described. Several experiments were conducted between July 2003 and March 2004 and the data obtained from the experiment was fitted by SELECT (Share Each Length class's Catch Total) model with unequal fishing and sampling efforts. The selection curve was determined to be 'estimated fishing efficiency' by model deviance rather than AIC. However the fishing efficiency between 20mm and 35mm mesh size did not seem to be different. The $L_{50}$ lengths of the selectivity for the 55mm and 75mm mesh size were 65.4mm and 96.0mm, respectively.

• Journal of Korea Water Resources Association
• /
• v.51 no.10
• /
• pp.853-862
• /
• 2018

An adaptive cut-cell grid based 2D inundation analysis model, K-Flood, is developed in this study. Cut cell grid method divides a grid into a flow area and a non-flow area depending the characteristics of the flows. With adaptive mesh refinement technique cut cell method can represent complex flow area using relatively small number of cells. In recent years, the urban inundation modeling using high resolution and fine quality data is increasing to achieve more accurate flood analysis or flood forecasting. K-Flood has potential to simulate such complex urban inundation using efficient grid generation technique. A finite volume numerical scheme of second order accuracy for space and time was applied. For verification of K-Flood, 1) shockwave reflex simulation by circular cylinder, 2) urban flood experiment simulation, 3) Malpasset dam collapse simulation are performed and the results are compared with observed data and previous simulation results.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.128-142
• /
• 2009

A lot of efforts have been made to resolve balancing problems between flux and source term and most finite volume models under development have been applied to simple channels such as imaginary and experimental channels. However, a number of numerical problems which can not be found in simple channels occur in the application to natural rivers and the problems should be resolved to apply finite volume models to natural rivers. In this study, 2D finite volume model which is applicable to natural rivers was developed and the accuracy of the developed model was validated through the application of partial dam break In addition, a simple and efficient 2D mesh generation method was suggested and the method can be accurately reflected to 2D mesh converted from surveyed cross sections in Han-river using GIS. The accuracy and applicability of the developed model on natural rivers were verified by performing simulation on Han-river using the generated mesh and comparing computed water elevation with measured water elevation.

• Journal of Industrial Convergence
• /
• v.18 no.2
• /
• pp.69-75
• /
• 2020

Industrial IoT has much interested in wireless mesh networks (WMNs) due to cost effectiveness and coverage. According to the advance in caching technology, WMNs have been researched to overcome the throughput degradation of multihop environment. However, there is few researches of cache power consumption models for WMNs. In particular, a wired line based cache power consumption model in content-centric networks is not still proper to WMNs. In this paper, we split the amount of cache power from the idle power consumption of CPU, and then the cache hit ratio proportional power consumption model (CHR-model) is proposed. The proposed CHR-model provides more accurate power consumption in WMNs, compared with the conventional cache power efficiency based consumption model (CPE-model). The proposed CHR-model can provide a reference model to improve energy-efficient cache operation for Industrial IoT.

• International Journal of CAD/CAM
• /
• v.9 no.1
• /
• pp.17-24
• /
• 2010

For several years, researchers have focused on improving the integration of the CAD, CAM and Analysis through a better communication between the various analysis tools. This tendency to integrate the CAD/Analysis and automation of the corresponding processes requires data sharing between the various tasks using an integrated product model. We are interested in this research orientation to CAD/CAM/Analysis integration by rebuilding the CAD model (BREP), starting from the Analysis results (deformed mesh). Because this problem is complex, it requires to be split into several complementary parts. This paper presents an original interoperability process between the CAD and CAE. This approach is based on a new technique of rebuilding the CAD surface model (Nurbs, Bezier, etc.) starting from triangulation (meshed surface) as a main step of the BREP solid model. In our work, the advantages of this approach are identified using a centrifugal pump example.