• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.74-79
• /
• 2019

The military vehicle produces electric power through an engine-integrated serial hybrid generator that is connected to the engine and does not have a separate generator installation space. However, depending on the mechanical characteristics of the connection between the generator and the engine, iron oxide for internal rusting and lubrication grew scattered. The iron oxide is adhered to the starter to deteriorate the starting performance, and there is a problem that the noise of the leg due to wear of the gear is increased. To solve this problem, the connection spline material and the surface treatment of the engine were improved and the shape was changed to a grease sealing type to prevent the generation of iron oxide inside. As the shape of the generator connector composing the shafting system was changed, the integrity of the structure was confirmed through the torsional endurance test. In addition, through the actual vehicle load test, it was verified that no corrosion occurred during the target life span without internal corrosion. It was confirmed that the anti-scattering structure of the grease effectively suppresses the generation of iron oxide, thereby reducing the noise generated from the generator. In this paper, we propose a fundamental solution to the degradation of the starter and the noise generation by preventing the back corrosion caused by the serial hybrid generator installed between the engine and the transmission.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.22-31
• /
• 2019

The application of BIM that can manage and integrate information generated during the entire life cycle of buildings in domestic and overseas construction projects is becoming active. When BIM is utilized in the construction phase, it can shorten the construction period, reduce the occurrence of reworks and improve collaboration capability. However, there are limitations in applying BIM to the construction phase due to the insufficient definition level of domestic BIM guidelines and inadequate design standards. In this regard, this study developed BIM model requirements checklist for the application of BIM in the construction phase. To develop the checklists, 21 domestic and overseas BIM guidelines, three public construction projects and four private construction projects to which construction BIM was applied, were analyzed. Based on the guidelines and cases, a total of 62 construction BIM model requirements (31 model objects and 31 attribute rules) and proposed construction BIM model requirement checklists by dividing the 61 requirements according to the requirement and purpose for utilization were identified. It is expected that the practical applications of the checklists proposed in this study will improve the level of BIM model in construction phase. In addition, this study has its significance as a basic research that can be used in the development of standardized guidelines for BIM model in construction phase from academic aspects.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.9
• /
• pp.5-13
• /
• 2019

The soil-water characteristic curve (SWCC) plays an important role in determining the soil suction parameters required to predict the seepage or shear behaviors of unsaturated soils. In addition, path dependency of the SWCC affects the mechanical and hydrologic behaviors. In general, there is a disadvantage that it takes a long time to measure both the drying and wetting paths of the SWCC by a stepwise pressurization method. Thus, the continuous pressurization method as an improved testing method for the SWCC was suggested, and the testing time for two paths of the SWCC was significantly shorter than the conventional methods. For the applicability evaluation of this method, the results of the SWCC obtained by the stepwise pressurization method and the evaporation method in this study were compared to the result obtained from this method. As a result, it was found that the difference among three methods was negligible, and the testing time of the continuous pressurization method was greatly decreased. Therefore, it can be said that it is possible to quickly and accurately measure the SWCC under various conditions by the continuous pressurization method.

• Journal of Practical Engineering Education
• /
• v.11 no.1
• /
• pp.61-73
• /
• 2019

Recently the Korean life-long occupational skill development system is undergoing rapid change and innovation on the basis of NCS (National Competency Standards). In order for the NCS-based occupational training system to be successfully established, it is required to be accepted and applied in the higher education. Universities, however, hesitate to adopt NCS-based contracted education programs of the work-and-study cooperative system due to low relevance of university education to industrial needs and absence of the reference operation model for the NCS-based contracted education programs considering Korean small companies' particular needs. This study aims to develop and apply a reference operation model for NCS-based contracted education programs of the university-linked work-and-study parallel system, focusing on the Department of Mechanical Design Engineering of College of Work and Study in Parallel, Koreatech. In addition, several operational guidelines are suggested within the framework of current law and regulations for successful diffusion of the NCS-based reference operation model. The results of this study are expected to contribute to nation-wide proliferation of NCS-based contracted education programs in the higher education and motivating companies and universities to participate in the work-and-study parallel initiatives.

• Particle and aerosol research
• /
• v.18 no.1
• /
• pp.9-21
• /
• 2022

In this study, a novel antiviral coating method for the air filtration system of subway station was investigated. Using dry aerosol coating process, we developed a high-performance antiviral air filter with spark discharger and carbon brush type ionizer. Silver nanoparticles were produced by a spark discharge generation system with ion injection system and were used as antiviral agents coated onto a medium grade air filter. The pressure drop, filtration efficiency, and antiviral ability of the filter against aerosolized MS2 virus particles as a surrogate of SARS-CoV-2 virus were tested with dust contamination. Dust contamination caused the increase of the filtration efficiency and pressure drop, while the antiviral agents (in this study, silver nanoparticles) coating did not have any significant effect on the filtration efficiency and pressure drop. Using these properties, we suggested a novel method to maximize the antiviral performance of the antiviral air filter that was contaminated by dust particles. Moreover theoretical analysis of antiviral ability with dust contamination and re-coated antiviral agents was carried out using a mathematical model to calculate the time-dependent antiviral effect of the filter under actual conditions of subway station. Our model can be used to apply on antiviral air filtration system of subway station for prevention of pandemic diffusion, and predict the life cycle of an antiviral filter.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.537-548
• /
• 2022

It is important to design the pavement thickness considering heavy-duty traffic loads, which can cause excessive stress and strain in the pavement. Port-rear roads and industrial roads have many problems due to early stress in pavement because these have a higher ratio of heavy loads than general roads such as national roads and expressways. Internationally, composite pavement has been widely applied in pavement designs in heavy-duty areas. Composite pavement is established as an economic pavement type that can increase the design life by nearly double compared to that of existing pavement while also decreasing maintenance and user costs. This study suggests a thickness design method for composite pavement using roller-compacted concrete as a base material to ensure long-term serviceability in heavy-duty areas such as port-rear roads and industrial roads. A three-dimensional finite element analysis was conducted to investigate the mechanical behavior and the long-term pavement performance ultimately to suggest a thickness design method that considers changes in the material properties of the roller-compacted concrete (RCC) base layer. In addition, this study presents a user-friendly catalog design method for RCC-base composite pavement considering the concept of linear damage accumulation for each container trailer depending on the season.

• Plant Journal
• /
• v.18 no.3
• /
• pp.41-51
• /
• 2022

Recently, LNG power plants are increasing drastically and the desire of an improvement in the quality of life is growing. The delay of power plant construction can hinder the stability of power supply and increase the cost. So this study was conducted to help power plant construction progressing from now on by studying on the social acceptance of a LNG power plant. On this study I limited the scope of the study to the stage of Site Selection which is the most conflict stage and can interrupt the project. To conduct this study I researched the recently constructed power plants which have been delayed, in particular Eumseong Natural Power Plant and Daegu LNG Power Plant which are under bitter conflicts with local residents and have difficulty in construction progressing. So I found out that it is very important to collect the opinions of the residents in the stage of Site Selection and it is necessary to change ACT ON ASSISTANCE TO ELECTRIC POWER PLANTS- NEIGHBORING AREAS. Lastly it is very important to adapt the state-of-the-art facilities to increase the social acceptance of a LNG power plant.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.1
• /
• pp.59-67
• /
• 2019

This article examines how Brecht's Gestus is borrowed and transformed into the film. I examined the critical debates on the film's use of Brecht and the style of Brecht's acting adopted in radical experimental films and Hollywood films. In addition, through the case of Korean film actor/ress, I sought to apply the Brechtian theory. First, despite the criticism that the film's acceptance of Brecht is overly formal and mechanical, film theory and practice reflect Brecht's ideas. In particular, regardless of the socio-political situation of Brecht's day, his Gestus is suitable and useful for film acting. Brecht's thought was realized by technological innovations such as montage and computer special effects, and above all, the social attitude of the actor was popularized through the education of the audience. Second, his strategy on performance is no longer unfamiliar, and goes beyond the boundaries of contradictory daily life and art, and becomes the pleasure of popular film. Although the intentions of naturalism and anti-naturalism in acting arts are different, the process and effects look at the same point. Third, through the case of Korean film actor/ress as an attempt of popular understanding about Brecht strategy, I could confirm the possibility of searching identity of Korean film actor/ress.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.395-406
• /
• 2023

The first technological advance to improve the output and efficiency of the latest steam turbines operating in co-generation plants in Korea can be said to be progress in the field of materials that can use high-temperature, high-pressures steam. As a result of design efforts to improve the internal efficiency of steam turbines along with the development of materials, only a few manufacturers of steam turbine have produced high efficiency steam turbines. The internal efficiency of a steam turbine on the steam path operating for a long period of time is gradually lost owing to the limit of mechanical life, and efficiency and output decrease. Therefore, this study aims to develop a model that can analyze the steam flow path performance of HP (High Pressure) and IP (Intermediate Pressure) steam turbine for a co-generation plant using a commercial program and propose a performance calculation method. Owing to the complex performance calculation method of steam turbines, major variables are presented to serve as practically useful references for steam turbine practitioners. In addition, the thermal dynamic analysis(such as heat balance diagram calculation) and the the thermal dynamic calculation required for steam turbine performance calculation and the suitability of the steam turbine performance calculation results were compared with the performance test results.

• Journal of the Daesoon Academy of Sciences
• /
• v.17
• /
• pp.113-134
• /
• 2004

According to Hans Kippenberg, the foundation of an academic study of religions coincided with the beginnings of modernization. Since the second half of the nineteenth century most European countries were involved in a process of rapid social change. The repercussions that this had for daily life were momentous. Instead of working for their traditional needs, people now had to produce goods for a market. Old customs ceded to private contracts and political laws. The superior knowledge of science replaced the inherited worldview. This deep changed severed societies from their ties to the past. Many educated people in Europe believed in an imminent end of all religions. Had not the scientific progress superseded the religious worldview? Historians had to come to terms with that expectation when they directed their attention to historical religions. Friedrich Max Muller introduced a new science, so-called Religionswissenschaft through the study of the ancient Vedic sources. He thought that genuine religion was a taste for, and sense of, the infinite. From his point of view, the Indian sources confirm that nature is more than mechanical laws. Thus his interpretation sought to contradict the materialist ideology of his day. Edward Burnett Tylor described religions as a kind of natural philosophy. His notion of 'soul' functioned to explain natural events. This legacy of the past cannot be missed even in modern society. Only the concept of the soul may preserve human dignity in an age of materialism. Gerardus van der Leeuw, also tried to perform the same function of the cultural critique for the renewal of the religious imagination in modern, rationalized Europe imprisoned in the iron-cage. In this respect, we could think that the interpretations of the history of the History of Religions in the light of the intellectual history are very suggestive for the korean student of religion. It helps them to describe the early history of the study of religion in Korea. For example, Yi Neung Wha(李能和) is regarded as 'a father of korean religious studies, but no one could present a proper answer for the question of why and through which connection of his intellectual milieu he was interested in the religious history and the study of religion. We would discover its signification in his confrontation of the prevailing social thought, such as social evolutionism.