• Genomics & Informatics
• /
• v.17 no.1
• /
• pp.4.1-4.7
• /
• 2019

In this paper, we propose a window-based mechanism visualization approach as an alternative way to measure the seriousness of the difference among data-insights extracted from a composite biodata point. The approach is based on two components: undirected graph and Mosaab-metric space. The significant application of this approach is to visualize the segmented genome of a virus. We use Influenza and Ebola viruses as examples to demonstrate the robustness of this approach and to conduct comparisons. This approach can provide researchers with deep insights about information structures extracted from a segmented genome as a composite biodata point, and consequently, to capture the segmented genetic variations and diversity (variants) in composite data points.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.4
• /
• pp.141-148
• /
• 2004

This paper proposes an IPSec accelerator performance analysis model based a queue model. It assumes Poison distribution as its input traffic load. The decoding delay is employed as a performance analysis measure. Simulation results based on the proposed model show around 15% differences with respect to actual measurements on field traffic for the BCM5820 accelerator device. The performance analysis model provides with reasonable hardware structure of network servers, and can be used to span design spaces statistically.

• Journal of the Korean Mathematical Society
• /
• v.59 no.1
• /
• pp.129-150
• /
• 2022

Let L = -∆ + V be a Schrödinger operator, where the potential V belongs to the reverse Hölder class. In this paper, by the subordinative formula, we investigate the generalized Poisson operator P^L_t,σ, 0 < σ < 1, associated with L. We estimate the gradient and the time-fractional derivatives of the kernel of P^L_t,σ, respectively. As an application, we establish a Carleson measure characterization of the Campanato type space 𝒞^𝛄_L (ℝⁿ) via P^L_t,σ.

• Journal of Drive and Control
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2022

Recently, a re-painting robot was developed to semi-automatically conduct blasting work in bridge spaces to improve work productivity and worker safety. In this study, a vision sensor-based monitoring module was developed to automatically move the re-painting robot along the path. The monitoring module provides direction information to the robot by analyzing the boundary between the painting surface and the metal surface. To stably measure images in unstable environments, various techniques for improving image visibility were applied in this study. Then, the driving performance was verified in a similar environment.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.457-463
• /
• 2013

PURPOSE. The purpose of this study was to compare the effect of a diode laser and traditional irrigants on the bond strength of self-adhesive cement. MATERIALS AND METHODS. Fifty-five incisors extracted due to periodontal problems were used. All teeth were instrumented using a set of rotary root canal instruments. The post spaces were enlarged for a No.14 (diameter, 1.4 mm) Snowlight (Abrasive technology, OH, USA) glass fiber reinforced composite post with matching drill. The teeth were randomly divided into 5 experimental groups of 11 teeth each. The post spaces were treated with the followings: Group 1: 5 mL 0.9% physiological saline; Group 2: 5 mL 5.25% sodium hypochlorite; Group 3: 5 mL 17% ethylene diamine tetra acetic acid (EDTA), Group 4: 37% orthophosphoric acid and Group 5: Photodynamic diode laser irradiation for 1 minute after application of light-active dye solution. Snowlight posts were luted with self-adhesive resin cement. Each root was sectioned perpendicular to its long axis to create 1 mm thick specimens. The push-out bond strength test method was used to measure bond strength. One tooth from each group was processed for scanning electron microscopic analysis. RESULTS. Bond strength values were as follow: Group 1 = 4.15 MPa; Group 2 = 3.00 MPa; Group 3 = 4.45 MPa; Group 4 = 6.96 MPa; and Group 5 = 8.93 MPa. These values were analysed using one-way ANOVA and Tukey honestly significant difference test (P<.05). Significantly higher bond strength values were obtained with the diode laser and orthophosphoric acid (P<.05). There were no differences found between the other groups (P> .05). CONCLUSION. Orthophosphoric acid and EDTA were more effective methods for removing the smear layer than the diode laser. However, the diode laser and orthophosphoric acid were more effective at the cement dentin interface than the EDTA, Therefore, modifying the smear layer may be more effective when a self-adhesive system is used.

• Korean Institute of Interior Design Journal
• /
• v.22 no.1
• /
• pp.194-202
• /
• 2013

In the modern society, phenomena such as a decrease in population and an increase in urban small houses caused by demographic changes, a decrease in midium-large housing constructions, and the concentration of one to two person families in the capital area cultivated ground for the growth of small house market. In response to these trends, interior coordination becomes a critical factor to be applied to the small houses in order to suit the residents' needs in most convenient, efficient and aesthetic ways. Therefore, an evaluation element is in demand to extract, evaluate and constantly improve the interior coordination elements. This study extracts and analyzes the essential elements required for small houses into spatial structure, system coordination and interior coordination. In domestic cases, most of spatial structure was conventional and linear while in foreign countries, various variations were found to reflect the needs from different consumers. For the system coordination, convenience played the most important role to emphasize on the easy use of digital system and built-in appliance system in domestic cases. However, in foreign countries, safety issue and economic aspects were the most considered when it comes to the interior coordination. In regard to interior coordination, installations of the storages for the limited small spaces that also support as extended spaces were rare to find in both cases for domestic and international settings. It is expected that systematic studies focused on more objective standards for interior coordination shall be implemented to provide indicators to measure the interior coordination cases in the near future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.1 s.120
• /
• pp.1-8
• /
• 2007

The purpose of this study is to suggest the minimum distance needed between landscape trees and apartment buildings. in order for the trees to grow soundly and maintain constant growth. Therefore, this study investigated and analyzed the present conditions of the green-spaces contiguous to apartment buildings and the trees inside the apartment complex. The following general problems were identified : (1) the tree growth conditions, (2) the planting intervals, and (3) the planting methods in the apartment complexes. The method of this study was to survey areas, measure the trees and analyze the results. Ten apartment complexes located in Seoul were randomly selected for this study. To analyze the greens contiguous to the building of each apartment complex, the greens were divided into three types, including the front greens, the side greens, and the rear greens. The study surveyed the width of all contiguous greens and the distance from trees to my given building. Four representative sites were specifically investigated to measure the crown widths, heights, and diameters of the trees. These investigations were carried out over 3 months from August to December 2006. According to the results of the study, it was found that the greens are narrower in width and the more closer to a building. The study identified a correlation between the tree and the passage of time after the completion of construction of an apartment complex, showing that the malformation of the trees worsened as time passed. As a result of measuring the right crown and left crown width with the tree trunk as the center, a broad difference was found between coniform trees and trees that tend to branch out more. For example, the ratio of the width of the Acer palmatum is 1:6. However, the ratio of the Metasequoia glyptostroboide is 1:1.7. Based on the overall analysis, it was concluded that the maintained minimum width must be greater than one meter over the green space according to the 'Landscape Standard 2000'. However, that is only applicable to cases such as apartment buildings that present no obstacles. In conclusion having greens placed within one meter of width to a building is not an appropriate environment for the healthy growth of trees. To create sound green spaces, sustainable, long-term growth rate and size should be considered. It is necessary to prepare new standards for the computation of planting trees and the measurement of square landscapes. Wall greenery and shrubberies could be an alternative in the case of a narrow-width green space.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.4
• /
• pp.15-29
• /
• 2021

Urban green spaces offer a variety of benefits to living things and humans. However, existing green spaces have been reduced and fragmented due to urbanization, and there is a limit to creating new large green spaces in densely developed cities. Street trees have fewer restrictions on land use, which can be a measure to secure green areas in cities. In Korea, excessive pruning is being done on some street trees for reasons such as blocking of building signboards, contact with electric wires, and restrictions on sidewalk widths. Therefore, it is necessary to quantitatively understand the relationship between the benefits provided by street trees and their structures to come up with an efficient and systematic planning and management plan for urban street trees. In this study, we quantitatively analyzed the relationship between the thermal comfort improvement by the shades of street trees and the vertical structure, planting environment, and types of street trees. To calculate the thermal comfort felt by human body, we calculated UTCI (Universal Thermal Climate Index) of each street tree. For the vertical structure of street trees, we used Terrestrial LiDAR and the point clouds of street tree's crown was sliced vertically at 1m intervals. We conducted a multiple regression analysis on the thermal comfort improvement using the variables we obtained from fields. As a result, in the case of a street tree's vertical structure, the lager the volume of tree's crown located 3-4m (β=0.298, p<.05) and 6-7m (β=0.568, p<.001) above clear length, the better the cooling effect. In addition, the thermal comfort improvement was assessed to decrease as the DBH increased (β=-0.435, p<.001). In general, the crown diameter and DBH are positively correlated, with a cooling effect occurring as crown diameter increases. In this study, the opposite result was obtained due to the small number of trees measured, so additional research is needed by increasing the number of tree samples. In the case of the planting environment, the effect of improving thermal comfort was higher in the shaded area of trees planted to the south (β=-0.541, p<.001). Since unsystematic management of street trees can deteriorate the function of them, quantitative evaluations of the vertical structure of street trees are required, which can provide specific measures for planning and management of urban street trees with thermal comfort effect.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.2
• /
• pp.85-92
• /
• 2023

Respiratory infections such as COVID-19 mainly occur within enclosed spaces. The presence or absence of abnormal symptoms of respiratory infectious diseases is judged through initial symptoms such as fever, cough, sneezing and difficulty breathing, and constant monitoring of these early symptoms is required. In this paper, image matching correction was performed for the RGB camera module and the thermal imaging camera module, and the temperature of the thermal imaging camera module for the measurement environment was calibrated using a blackbody. To detection the target recommended by the standard, a deep learning-based object recognition algorithm and the inner canthus recognition model were developed, and the model accuracy was derived by applying a dataset of 100 experimenters. Also, the error according to the measured distance was corrected through the object distance measurement using the Lidar module and the linear regression correction module. To measure the performance of the proposed model, an experimental environment consisting of a motor stage, an infrared thermography temperature screening system and a blackbody was established, and the error accuracy within 0.28℃ was shown as a result of temperature measurement according to a variable distance between 1m and 3.5 m.

• Journal of Elementary Mathematics Education in Korea
• /
• v.20 no.4
• /
• pp.521-539
• /
• 2016

The structures of partitive and quotitive division of fractions are dealt with differently, and this led to using partitive division context for helping develop invert-multiply algorithm and quotitive division for common denominator algorithm. This approach is unlikely to provide children with an opportunity to develop an understanding of common structure involved in solving different types of division. In this study, I propose two approaches, measurement approach and isomorphism approach, to develop a unifying understanding of fraction division. From each of two approaches of solving quotitive division based on proportional reasoning, I discuss an idea of constructing a measure space, unit of which is a quantity of divisor, and another idea of constructing an isomorphic relationship between the measure spaces of dividend and divisor. These ideas support invert-multiply algorithm for quotitive as well as partitive division and bring proportional reasoning into the context of fraction division. I also discuss some curriculum issues regarding fraction division and proportion in order to promote the proposed unifying understanding of partitive and quotitive division of fractions.