• Journal of the Korean Chemical Society
• /
• v.44 no.1
• /
• pp.60-67
• /
• 2000

The wavelength of the surface plasmon absorption depends on the dielectric matrix. $TiO_2/SiO_2$ complex oxide films doped with Au nanoclusters were prepared by sol-gel spin-coating method using $Ti(OPr^i)_4$, $Si(OEt)_4$, and $HAuCl_4{\cdot}7H_2O$. The wavelength of the maximum absorption of Au nanoehrsters in the $TiO_2/SiO_2$ thin films was obtained with lineality from 540 nm to 615 nm depending on the molar ratio of $TiO_2$. The particle sizes and structures of these nanoclusters have been identified through a TEM and X-ray diffraction patterns. The dielectric constants of $TiO_2/SiO_2$ thin films were calculated from the experimental results.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.278-278
• /
• 1996

Judging from hydrocortisone concentration in dosing area, the extent of absorption was reduced in the liposome-gel formulation. However, higher and sustained skin concentrations of hydrocortisone were achieved for the liposome-gel as compared to the ointment. Drug concentration in both viable and deep skin reached its maximum within 0.5 h after application of both formulations to both skin types. Drug concentrations in both skins from the ointment declined with time, while those from the liposome-gel were greatly sustained. The sustainment by the liposome-gel was more remarkable in the viable skin than in the deep skin. Drug concentration in the viable skin could be maintained at a nearly constant level for over 8 h by applying the liposome-gel. As a result, a 5-fold higher viable skin drug concentration was obtained from the liposome-gel than from the ointment at 8 h after the application to the SC-removed skin. However, the plasma concentration of hydrocortisone at 4 h from the liposome-gel was only one-fourth (p<0.01) the value from the ointment when the drug was applied to the SC-removed skin, consistent with. the lower urinary (one-third, p<0.05) and fecal (one-half, p＜0.05) excretion. Conclusions : Retarded diffusion of the drug from the skin to the systemic blood stream appears to be a potential factor in the sustained skin concentration of hydrocortisone from the liposome-gel, Interaction of hydrocortisone in the skin with phosphatidylcholine, a component of the liposomes and skin, may well be a factor in retarding the diffusion of the drug in the skin.

• Microbiology and Biotechnology Letters
• /
• v.32 no.3
• /
• pp.265-270
• /
• 2004

To select a promising technologies for removal of odorous gases emitted from a wastewater pump station, four methods such as activated carbon (A/C) adsorption, chemical absorption (acid and alkali scrubber), and two biofilters (polyurethane (PU) and worm cast) were investigated. The average odor removal efficiencies in the PU biofilter and A/C column was over 98%, but in a worm cast biofilter and chemical absorption were below 60-80%. The removal efficiency of PU biofilter was very stable (about 98-99%) in the range of retention times of 4-36s, and a maximum elimination capacity was $1.6${\times}$10^{ 7}$ $OUm^{-3}$$h^{-1}$ Deodorization costs for an activated carbon adsorption and a biofiltration method were investigated. With increasing odor intensity, the operating cost of the A/C column increased linearly, but the operating cost of the biofilteration increased slightly. The capital cost in a biofilter is about two times higher than that in an A/C column, but the operating cost is very lower than that of in A/C column. In conclusion, the biofiltration was evaluated one of the most promising technologies to control odor in a wastewater pump station.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.915-921
• /
• 2007

As a preliminary measurement of siloxanes in landfill gas(LFG), this study was conducted to determine the best suitable solvent applicable to the extraction of siloxanes in the domestic landfill using liquid-absorption method. Three solvents of n-hexane, acetone, and methanol were tested and the results obtained from GC analysis for each solvent were compared to their properties. Results showed that the resolution in the GC spectrum was the best from methanol due to the lack of overlapping of the peaks between silane and solvent. The detected siloxanes concentration were varied at maximum 2.6 times depending on the types of solvent as well as extraction velocity and impinger steps. In total, the highest concentration of siloxanes was obtained from methanol, which showed ideal pattern in the absorption of each impinger step and the least relative standard deviation. Accordingly, it is concluded that methanol is the most suitable solvent for the extraction of siloxanes in the domestic landfill. However, it is considered that solvent suitability can vary depending on the waste components and landfill record in landfills.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.11-18
• /
• 2017

In the present study, the low speed (4 km/h) crash behaviour of an aluminium bumper system was characterised by FE analyses based on the FMVSS 581, which regulates automotive bumpers. Two types of cross-sectional designs, i.e., Model 1, which contains a single rib and Model 2, double ribs, have been considered along with Al7021, 6082 and 6060 for the aluminium bumper back beam. Variations in thickness starting from 2 to 4 mm of the bumper system cross-section in the FE model was implemented in order to investigate the thickness effect on the bumper's crash behaviour.. Three kinds of design variables, namely, number of ribs, material and thickness, are considered. The FE analysis results are summarised with the maximum load and the Specific Energy Absorption (SEA) since they are the key factors in determining the crashworthiness of automotive structures. The results may also be able to indicate how to achieve lightweight structure of the automotive bumper system either directly or indirectly.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.1
• /
• pp.23-29
• /
• 2018

A stand-alone Photovoltaic (PV) system is one of the most important energy system for Mongolian nomadic herders. Basically, a stand-alone PV system uses two DC-DC converters. This makes the system costly, size bigger and difficult to move from one place to another place for the nomadic herders. A combined control algorithm for charging the battery using Stage of Charge (SOC) and Maximum Power Point Tracking (MPPT) is proposed in this paper. The batteries are charged by the three stage method; bulk, absorption and float charge. In the bulk stage used the MPPT function in this study. The performance of the proposed control algorithm is evaluated in both steady and changing weather conditions. The results are obtained using PSIM software. The results obtained in this paper are useful in designing a stand-alone PV system in the rural life like Mongolian nomadic herders.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.78-84
• /
• 2017

Consistent efforts have been made to reduce the weight of automotive parts by using lightweight materials. This has resulted in the replacement of conventional steels in car body structures with high-strength steels, and the current usage rate has reached 50%. This study examines the structural stiffness and energy absorption capability of bumper beams made of high-strength steels. New types of bumper beam cross sections are proposed.The structural stiffness and maximum bending force were computed via finite element analysis as about 25tons and 7.5tons/mm, and there were no significant differences among the proposedcross sections. Dynamic analysis was also carried out to investigate the energy absorption capabilities of the bumper beams, and the effects of materials and thickness reduction were analyzed. High-strength steel can be used to achieve weight reduction with comparable structural performance to conventional bumper beams.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.790-797
• /
• 2019

To improve photocatalytic performance, CdS nanoparticle deposited TiO₂ nanotubular photocatalysts are synthesized. The TiO₂ nanotube is fabricated by electrochemical anodization at a constant voltage of 60 V, and annealed at 500 for crystallization. The CdS nanoparticles on TiO₂ nanotubes are synthesized by successive ionic layer adsorption and reaction method. The surface characteristics and photocurrent responses of TNT/CdS photocatalysts are investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-Vis spectrometer and LED light source installed potentiostat. The bandgaps of the CdS deposited TiO₂ photocatalysts are gradually narrowed with increasing of amounts of deposited CdS nanoparticles, which enhances visible light absorption ability of composite photocatalysts. Enhanced photoelectrochemical performance is observed in the nanocomposite TiO₂ photocatalyst. However, the maximum photocurrent response and dye degradation efficiency are observed for TNT/CdS30 photocatalyst. The excellent photocatalytic performance of TNT/CdS30 catalyst can be ascribed to the synergistic effects of its better absorption ability of visible light region and efficient charge transport process.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.420-428
• /
• 2009

In this study, the composites containing carbon black (CB) or carbon fibers were prepared, and the microwave absorbing properties and the absorption mechanism of them were investigated and discussed in the frequency range of 2-18 GHz, respectively. The optimum mass fraction of CB has been found as 6%, and the carbon fibers were discovered to absorb radar wave either under parallel or vertical polarization, the suitable gap distance between each bundle of which was 5 mm. According to the results of the single constitute absorber samples, the structured composites with the two kinds of absorbers combination were fabricated and studied at 2-18 GHz. The top layer absorbers affect the absorption performance a lot; the maximum reflection loss of composites with CB as top layer absorbers was -31.8 dB with the frequency range of 2.4 GHz below -10 dB, and the other type with CFs as the top layer absorbers obtained the reflection loss peak value of -31.4 dB with 2 GHz below-10 dB.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.1-5
• /
• 2004

Tunable diode laser absorption spectroscopy was performed for analysis of the H$_2$$^{18}$ O/H$_2$$^{16}$ O isotope ratio of a water sample which was enriched by the membrane distillation method. In order to improve the signal-to-noise ratio, the wavelength modulation spectroscopic method was used with a lock-in amplifier. The fringe noise could be suppressed by using the FFT (Fast Fourier Transform) lowpass filter and the optimization of the modulation depth of the laser frequency. The maximum deviation of $\delta$-value was measured to be$\pm$4$\textperthousand$.