• The korean journal of orthodontics
• /
• v.10 no.1
• /
• pp.15-27
• /
• 1980

This study was undertaken to compare the craniofacial morphology of Class II, Division 1 malocclusion with that of normal occlusion in children, and to investigate the incidence of various Class II, Division 1 craniofacial skeletal patterns. The subjects consist of thirty seven boys and fifty three girls with Class II, Division 1 malocclusion, and forty six boys and eighty one girls 10-15 years with normal occlusion. Measurements were recorded, tabulated and analyzed on the lateral cephalograms by the degree of SNA, SNB and ANB. The following characteristics of the Class II, Division 1 skeletal pattern were observed. 1. The anteroposterior relationship of the maxilla to the cranium in the Class II, Division 1 was very similar to that of normal occlusion. 2, Mandible of the Class II, Division 1 malocclusion was in the posterior position in relation to the cranial anatomy when compared to normal. 3. The chin point as measured by SN Pog and NS Gn showed distal positioning in relation to normal occlusion. 4. SN to mandibular plane angle was large in Class II, Division 1 malocclusion. 5. Mandibular incisor inclination was not significantly different between Class II, Division 1 malocclusion and normal occlusion, but maxillary incisors inclined and positioned labially and consequently overjet was large in Class II, Division 1 malocclusion. 6. Class II, Division 1 malocclusion was divided into four types of craniofacial skeletal pattern. The most common Class II, Division 1 pattern was found to be type C in which SN-Mand. Pl. was above mean range of normal occlusion. The next frequent pattern was found to be type A in which maxilla and mandible were within normal range of protrusion while upper incisors were severly labially inclined.

• The korean journal of orthodontics
• /
• v.19 no.2
• /
• pp.130-143
• /
• 1989

The purpose of this study was to assess the early effect of FR III on the growing patients with anterior cross-bite. The lateral cephalograms and models were obtained from 7 patients at the time of pretreatment and correction of anterior cross-bite. The results were as follows: 1. A slight tendency of rotation toward anterosuperior direction and the growth to anterior direction were shown in maxilla. 2. There were a little change of mandibular vertical position and increase in lower facial height although some variations existed. 3. The bodily or labial tipping movement was shown in maxillary incisors. 4. The lingual tipping of mandibular incisors was shown in all cases. 5. Maxillary arch width increased while mandibular arch width usually changed a little although some variations existed. But it was difficult to summary in a word because variable responses were noted according to a wide variety of skeletal type, growth, and malocclusion.

• The korean journal of orthodontics
• /
• v.23 no.3 s.42
• /
• pp.319-326
• /
• 1993

The purpose of this study was to evaluate the frequency of congenital missing teeth and supernumerary teeth in cleft patients. The subjects were divided into bilateral cleft lip and palate(BCLP), unilateral cleft lip and palate(UCLP) and cleft palate alone(CP alone) groups. 97 cleft patients(BCLP 15, UCLP 70, CP alone 12) between 6-20 years old were evaluated. Panorama film, Orthodontic chart and initial intraoral photogram were employed for this research. The obtained results were as follows. 1. The incidence of congenital missing teeth in total cleft samples was $57.7\%$, and the incidence of supernumerary teeth was $26.8\%$. Each incidence was higher than non-cleft. 2. The incidence of congenital missing teeth was the highest in BCLP and the lowest in CP alone. 3. The number of congenital missing teeth per perso was usually one, and the frequency was higher in the maxillary lateral incisors$(67.8\%)$, and maxillary second premolar$(14.9\%)$ than other teeth. 4. Most of tooth number anomalies in cleft patients were found in maxilla, especially adjacent region to the cleft site.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.3
• /
• pp.544-556
• /
• 1997

All ceramic restorations except In-Ceram Alumina system gave a good esthetics and an exellent marginal fidelity. The flexural strength of them had about 150MPa, so the indication is only single crown. By using In-ceram Alumina System(450Mpa), it is thought to be possible to construct bridge for its high flexural strength. But the prognosis is unclear, The purposes of this study are to clear short term prognosis of In-Ceram bridge restorations, to elucidate its clinical significance. Among 22 In-Ceram Bridge restored in our department, 11 In-Ceram bridges with follow up were used. The period of placement is from 1 to 18 months. The results were as follows : 1. Among follow up 11 bridges, 2 bridges were fractured. One is 4 unit in maxillary lateral incisors, the other is 3 unit bridge in maxillary canine and premolar. Including 11 bridge without follow up, failure rate is very low(2/22). 2. The fracture sites are connector areas between abutment and pontic. To maintain In-Ceram bridge for long term period, it is needed to remove the nonphysiologic occlusal force and to have sufficient thickness of alumina core. For estabilishing clinical use of In-Ceram bridges, it is thought to need clinical research during long term period.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.64-75
• /
• 2019

The purpose of this study was to obtain instructions for size selection of prefabricated crown and tooth reduction by 3-dimensional analysis of the size and shape of the maxillary primary central and lateral incisors and prefabricated crowns (celluloid strip, resin veneered stainless steel, and zirconia crowns). The maxillary primary central and lateral incisors of 300 Korean children was scanned with three types of prefabricated crown to create standard three-dimensional tooth models and prefabricated crowns. The shapes of the prefabricated crowns and natural teeth were compared according to four parameters (mesio-distal width, height, labio-palatal width, and labial surface curvature coefficient) and calculated the amount of tooth reduction required for each prefabricated crown. The size 2 resin veneered stainless steel crown, size 1 zirconia crown, and size 2 celluloid strip crown were most similar in shape to the primary central incisor. The size 3 rein veneered stainless steel crown, size 2 zirconia crown, and size 3 celluloid strip crown were most similar to the primary lateral incisor. The amount of tooth reduction was similar in both maxillary primary central and lateral incisors. The incisal reduction was greatest for the zirconia crown. At the proximal surface, the zirconia and celluloid strip crowns required a similar amount of tooth reduction, but more than the resin veneered stainless steel crown. The labial surface reduction was greatest for the zirconia crown. The degree of lingual surface reduction was not significant among the three prefabricated crowns. Among the assessment parameters, mesio-distal crown width was the most important for choosing a prefabricated crown closest to the actual size of the natural crown.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.502-509
• /
• 2003

After 800 students of Chonbuk National University was examined, 86 people (male : 43, female : 43, mean age : 22.2 years old) was selected as a group of normal occlusion. From their gypsum cast, this conclusion was obtained. 1. Intra-observer measurement errors in buccolingual diameter, maxillary lateral incisors have somewhat bigger errors. In mesiodistal diameter, maxillary first molars and maxillary second molar have bigger numerical value. Mean errors of measurement are 0.051mm at buccolingual diameter of crown and 0.083mm at mesiodistal diameter. 2. Fluctuating asymmetry is 0.030 average in buccolingual diameter, and 0.037 average in mesiodistal diameter. Statistically there are no big differences. 3. Male has longer buccolingual diameter than female in every permanent teeth. Teeth which have statistical difference in buccolingual diameter are maxillary lateral incisor, maxillary canine, maxillary second molar, mandibular central incisor, mandibular canine, mandibular second premolar, and mandibular first molar. In mesiodistal diameter maxillary central incisor, maxillary canine, and mandibular first molar have statistically difference. 4. Tooth which has the biggest difference depending on gender is maxillary lateral incisor in buccolingual diameter and mandibular canine in mesiodistal diameter. 5. Both sexes have similar crown index. Male has bigger value of crown module measurement and crown area measurement in every tooth. Crown area considered as size of tooth from occlusal surface was bigger in male than in female statistically except some teeth, maxillary first premolar, mandibular lateral incisor, first premolar and second premolar.

• Journal of Korean Dental Science
• /
• v.9 no.2
• /
• pp.63-68
• /
• 2016

Pressure root resorption can be observed during the eruption of permanent dentition, especially of the maxillary canines (affecting lateral incisors) and mandibular third molars (affecting mandibular second molars). Since the cause of root resorption of the adjacent affected teeth is evident, treatment simply involves extraction of the impacted tooth. However, there have been few reports on the prognosis of the remaining resorbed tooth, as dentists often choose to extract them when damage due to root resorption is observed. We report a case involving a tooth that was severely resorbed due to pressure from an adjacent impacted tooth. After extraction of the impacted tooth, the remaining tooth retained vital pulp and survived as a functional tooth.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.55-63
• /
• 1976

This study was undertaken to establish the roentgenocephalometric standards of the Korean children in Hellman dental age III C. The subjects consisted of 33 males and 33 females with the normal occlusion and acceptable profile. The lateral cephalometric films were taken with the teeth in centric occlusion, the soft tissue outline of the nose, lips, and chin was made visible by the low-speed films, 70Kvp, 100Mas. Their linear and angular measurements were performed by Jarabak's methods. The following results were obtained; 1) The author made the tables of standard deviation from the measured values. 2) Each linear measurement of the skull was greater in males than in females. 3) The maxillary basal bones were more protrusive in Korean children than in Caucasian. 4) The degree of the facial convexity was larger in Korean children than in Caucasian. 5) The labial inclination of the upper & lower incisors was greater in Korean children than in Caucasian. The labial inclination of the upper incisor was greater in females, but the labial inclination of the lower incisor was greater in males.

• Restorative Dentistry and Endodontics
• /
• v.40 no.2
• /
• pp.166-171
• /
• 2015

A palato-radicular groove (PRG) is a developmental anomaly primarily found in the maxillary lateral incisors. It is a potential communication path between the root canal and the periodontium that decreases the survival prognosis of the affected tooth, therefore compromising the stability of the dental structure in the oral cavity. The aim of this case report is to present an original technique where a PRG was treated by means of intracanal disinfection, PRG sealing with glass ionomer, replantation with intentional horizontal 180 degree rotation of the tooth, and an aesthetic veneer placed to provide adequate tooth morphology. The clinical and biological benefits of this novel technique are presented and discussed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.519-525
• /
• 2010

Ectopic eruption means the eruption of the tooth in an abnormal position due to multiple factors, which found most frequently in maxillary fist permanent molars, mandibular lateral incisors and maxillary permanent canines. Ectopic eruption of the maxillary first permanent molar occurs when the molar erupts with a more mesial angulation than normal, and locks itself in an atypical resorption on the distobuccal root of the second primary molar. The maxillary first permanent molar plays important roles for mastication and occlusion, so ectopically erupted maxillary first permanent molars should be relocated into proper position. Treatment options are separation by insertion of the brass wire or elastic rings, preparation of distal aspect of the maxillary second primary molar, using fixed or removable appliance with finger spring, and placement of space maintainer or space regainer after extraction of the maxillary second primary molar. We report three cases treated of ectopically erupted maxillary first permanent molar by re-setting of stainless steel crowns, placement of brass wire and using active plate. We could find out distal movement of maxillary first permanent molars into proper position and normal occlusion.