• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.651-655
• /
• 2004

This paper studies the designing method and application for grommets, rubber material used to absorb vibration on the air conditioner compressor. The existing grommet with hardness 40 degrees, EPDM, has the high transmissibility on the compressor that causes additional structure born sound. The problem for EPDM is transformation over long time usage possibly due to its design in which stress is concentrated on a certain position. In order to resolve it, silicon material was previously used with the same design in some models. The vibration performance did improve, but the cost became high. Below are the major developments regarding improvements in compressor rubber material, vibration performance and durability through design change, and new grommet to attain cost reduction. 1 The optimum grommet design for stress even distribution through FEM methods. 2. Comparison for grommet material and design for improved transmissibility. 3. Assess for grommets durability and product applications.

• 한국전산구조공학회논문집
• /
• 제29권5호
• /
• pp.429-436
• /
• 2016

연구에서는 철근콘크리트 건물에 대한 유전자 알고리즘 기반의 최적구조설계기법을 제시하고자 한다. 목적함수는 구조물의 비용과 이산화탄소 배출량을 동시에 각각 최소화하는 것이다. 비용 및 인산화탄소 배출량은 구조설계안에서 얻을 수 있는 단면치수, 부재길이, 재료강도, 철근량 등과 같은 설계정보를 통해 계산한다. 즉, 구조물의 물량을 기초로 하여 비용과 이산화탄소 배출량을 평가한다. 재료의 운반, 시공 및 건물 운영 단계에서 발생하는 비용 및 이산화탄소 배출량은 본 연구에서 제외한다. 제약조건은 철근콘크리트 건물을 구성하는 기둥과 보 부재의 강도조건과 층간변위조건이 고려된다. 제약조건을 평가하기 위해 OpenSees를 활용한 선형정적해석이 수행된다. 제약조건을 만족시키면서 목적함수에 대해 최소의 값을 제시하는 설계안을 찾기 위해 유전자 알고리즘이 사용된다. 제시한 알고리즘의 적용성을 검증하기 위해 4층 철근콘크리트 모멘트 골조 예제에 제시하는 기법을 적용하여 검증한다.

• 보건행정학회지
• /
• 제4권1호
• /
• pp.107-122
• /
• 1994

Many alternatives have been discussed to reduce the medical expenditure and to use the medical resources effectively. Many studies about the economies of scale have been done for the last several decades. This study has analyzed the relationship between the number of beds and the mean expense per hospitalization day in Korea. A Cost Function Model was identified and we wanted to see the minimum optimal size with the cheapest mean expense per hospitalization day. The result is as follows; 1. In the Cost Function Mode, (the number of beds)$^{2}$, the number of personnel, productivity and training institutions are the factors that statisticaly influence the mean expenses. 2. By the univariate analysis the mean expense proved to be the smallest as the level of 150-200bed, The breaked down of the components of expenses shows that the mean labor cost is much different from the mean value of material and administration costs, and that hospital with 150-200 beds also have the minimal expense. The mean expense goes up dramatically in hospitals of 450 beds or more. 3. When the other conditions are constant, according to the multiple regression analysis of the mean expense per adjusted hospitalization day the minimum optimal size with the cheapest expense is a hospital with 191 beds and the hospital with 230 beds takes the lowest mean labor cost. The material or administration costs are not influenced by hospital size. This research has limitation in measuring the variables that influence hospital xpenses, in estimating hospital output by the number of beds in considering outpatient cost and in securing representativeness of hospitals because many hospitals made no responses to the research questionnare. But it is valuable and helpful for development of health policy to figure out the number of beds with the cheapest expense per hospitalization day.

• 한국건설관리학회논문집
• /
• 제25권5호
• /
• pp.73-81
• /
• 2024

In South Korea, NO_X emissions are a major concern, leading to acid rain and smog, harming both the atmosphere and human health, particularly in urban areas. This study seeks to determine the most advantageous pavement material for NO_X reduction in urban areas and assess whether photocatalytic pavement blocks, proven to reduce NO_X emissions, can serve as a viable alternative to conventional cement pavement blocks. To achieve this, a comparative life cycle cost (LCC) analysis was conducted between photocatalytic pavement blocks and conventional cement pavement blocks installed for their NO_X reduction capabilities. The cost-saving benefits of NO_X reduction were monetized for photocatalytic pavement blocks. The analysis period was based on the least common multiple of the replacement cycles of both pavement materials: 30 years. The results revealed that while photocatalytic pavement blocks initially produce higher installation costs than cement pavement blocks, they offer greater cost savings in terms of total cost and net present value due to their NO_X reduction effect over the life cycle. Additionally, the cost-saving effects of photocatalytic pavement blocks are even more pronounced because their replacement period is 5 years longer than that of cement pavement blocks. This study holds significance in performing an LCC analysis of the previously unanalyzed photocatalytic pavement blocks while also demonstrating their potential as substitutes for cement pavement blocks.

• 플랜트 저널
• /
• 제8권1호
• /
• pp.50-59
• /
• 2012

The current dual-watchdog estimation system has individually calculated the construction, the engineering and the procurement cost. The dual-watchdog estimation system is inefficient and prolonged estimation period because of the lack of the interoperability and the difference of material unit cost and construction unit cost. In order to resolve this problem, new estimation software was developed. The estimation software is developed by making up for the weak points in existing estimation method. The cost data with the same standard is the key point. And this software enhanced accuracy and speed of the data search in stylized estimation standard. A summary of the construction, the engineering and the procurement cost was generated in this estimation software. The unit rate about the labor cost, equipment and expense through a sheet was handled. The developed estimation software has five categories on engineering cost, procurement cost, construction cost and subcontractor management sheet. In this study, the estimation software to supplement the faults of the existing estimation method was developed. And estimation software on petrochemical projects increases an efficiency of the estimation work.

• Journal of Multimedia Information System
• /
• 제4권3호
• /
• pp.157-162
• /
• 2017

The title of this project is "A Simple Interactive 3D Interior Design Application for Living Room - Cost Management", focusing on developing an application that enables costing and designing to be executed concurrently in interior design phases. This is because any changes made at costing phase after design phase is completed, it will potentially lead to unnecessary increase in cost and time. Therefore, the objective of this project is aimed to devise a cost management module to be included in the proposed application, allowing interior designer to make cost-based decision at the designing phase itself. This can be achieved through its proposed functions which include total cost update, budget management, cost estimator calculator and material list generation. The methodology being proposed in this project is Prototyping Development, categorized under Rapid Application Development (RAD), by starting off with planning, analysis, design and implementation phases are performed concurrently and repeatedly in a cycle to produce a prototype until the application is completed. In the end of this project, the developed prototype is expected to contribute a better solution towards cost management in interior design.

• 한국국방경영분석학회지
• /
• 제36권1호
• /
• pp.29-38
• /
• 2010

In Korea weapon system acquisition processes, it's required a cost estimation report obtained from a commercial cost model. The PRICE model is generally used as a cost estimation model in Korea. However, the model uses American historical R&D data and it's output cost component is different from our cost component of defense accounting system. Also, we found that estimating results show about 10% of difference when we comparing with actual costs in 44 finished weapon acquisition projects. There are some limitations in calibration to increase an accuracy of the PRICE model because it's difficult obtain good real input data, detailed cost and technical data in low level WBS. So, only 8% of the defense R&D projects are calibrated and validation of calibration results is more difficult. Therefore, we studied the standard calibration process and performed the calibration about the MCPLXS/E parameters of the PRICE model based on actual cost data. In order to obtain a good calculation result, we collected the actual material costs from the defense industry companies. Our results can be used for an reference in similar weapon system R&D and production cost estimation cases.

• 한국가스학회지
• /
• 제18권2호
• /
• pp.81-86
• /
• 2014

대형 LNG 내부 탱크의 내측 벽체에 가설되는 스티프너의 제작에 있어 판재 비용을 최소화하기 위하여 다양한 스티프너 규격에 따른 원 판재의 소요 중량과 비용을 분석하였다. 이를 위하여 판재 물량 산정 프로그램을 개발하여 자동화함으로써 설계자가 수작업으로 수행하는 물량 산정을 작업시간의 단축과 함께, 다양한 중량과 비용의 분석이 가능하도록 하였다. 분석결과, 판재 폭이 큰 것을 사용할수록 스티프너를 제작하는데 사용되는 원 판재의 총 소요개수, 중량 및 비용이 감소하였으나, 최적의 LNG탱크용 스티프너 판재 폭을 결정하기 위해서는 소요 판재의 중량과 함께 비용의 분석이 필요하였다.

• 한국농촌건축학회논문집
• /
• 제19권4호
• /
• pp.57-65
• /
• 2017

Life quality in farming areas is declining these days on account of decrease in population with the outflow of young generations, advent of aging society, and also lack of social and physical infrastructure. To reverse this, the central and local governments have been devising policies in many ways; however, the vulnerable class in farming area suffering from financial difficulty is not supported with that properly. The results of applying insulation materials applicable to rural houses, EPS, e-board, and glass wool, actually to rural houses are summed as follows. EPS is the most inexpensive among the three installations in terms of material cost and expenses. The indoor and outdoor temperature difference increased from $0.9^{\circ}C$ to $2.5^{\circ}C$, and the temperature change reduced as $0.04^{\circ}C$. With e-board, the indoor and outdoor temperature difference increased from $3.3^{\circ}C$ to $7.5^{\circ}C$; however, the temperature change increased as $0.09^{\circ}C$. Unlike the other two methods, glass wool requires the additional installation of wooden frames. The material cost is highest, and the indoor and outdoor temperature difference increased from $1.1^{\circ}C$ to $8.0^{\circ}C$, and the temperature change reduced as $0.01^{\circ}C$. According to the results of measuring temperature, glass wool's temperature difference is measured to be the highest, but temperature change is found to be the most effective in EPS. Among the three insulation methods, EPS is the most economically advantageous as the material supply is easy and the cost is low. The material is easily processible, so ordinary town residents can install it easily, and it is effective at improving insulation performance, too. But this method cannot be applied when the house has walls that are not even. Also, as the insulator is thick, after the installation, the living space may be narrower as a result.

• 정보관리학회지
• /
• 제22권1호
• /
• pp.47-64
• /
• 2005

디지털 자료에의 장기적인 접근을 보장하기 위해서는 체계적인 디지털 보존이 이루어져야 하며, 디지털 보존에 대한 지속적인 예산 지원에는 비용요소에 대한 구체적인 파악이 선행되어야 한다. 본 연구는 기존 관련연구를 토대로 디지털 보존의 필수 비용요소들을 추출하였으며, 이를 보존과의 관련성 정도에 따라 직접보존비용과 간접보존비용으로 범주화하였다. 디지털화 사업이 대규모로 진행되고 있는 국내 도서관을 사례분석 대상으로 선정하여 디지털 보존현황을 분석하고 보존비용을 추정하였다. 사례분석 결과, 기본적인 디지털 보존은 이루어지고 있으나 디지털 자료에의 장기적인 접근을 보장하기 위한 보다 포괄적이고 체계적인 보존기능이 미흡한 것으로 나타났다. 현재 사례분석 대상 도서관에서 수행되고 있는 디지털 보존을 토대로 분석했을 때, 도서관 A와 B에서는 각각 원문DB 구축비용의 $11.8\%$와 $8.6\%$에 달하는 디지털 보존비용이 매년 투입되어야 하는 것으로 추정되었다. 그러나 본 연구의 결과는 매우 보수적인 추정치라고 할 수 있다. 이는 대상 도서관의 경우 디지털 서고의 구축과 메타데이터 생성 등의 보존기능이 수행되지 않고 있어 이에 소요되는 비용이 추정에서 배제되었기 때문이다. 본 연구는 디지털 보존이 디지털 자료의 생산 단계부터 접근까지의 모든 활동에 직${\cdot}$간접으로 관련되어 있는 종합적인 활동이며, 디지털화 사업을 착수하는 단계에서부터 반드시 고려되어야 하는 사업임을 입증해 주고 있다.