Abstract
The analysis of the cost optimization and the total demand weight of 9% Ni-steel plates for installing shell stiffeners in the side wall of the large capacity LNG storage tank are carried out in order to reduce the costs of the plates for stiffeners. This study can be possible for developing the calculation program which evaluates the bill-of-material for stiffeners to reduce the manual calculation time of tank designer, and to enable the estimation of weight and cost for various plate width. The results show that the demand weight and cost are reduced as the plate width is wider. Nevertheless, both the weight and the cost with plate width for stiffeners should be compared and evaluated to obtain the optimum cost time to time because of various cost incremental factors of plates such as transportation and handling cost, etc.
대형 LNG 내부 탱크의 내측 벽체에 가설되는 스티프너의 제작에 있어 판재 비용을 최소화하기 위하여 다양한 스티프너 규격에 따른 원 판재의 소요 중량과 비용을 분석하였다. 이를 위하여 판재 물량 산정 프로그램을 개발하여 자동화함으로써 설계자가 수작업으로 수행하는 물량 산정을 작업시간의 단축과 함께, 다양한 중량과 비용의 분석이 가능하도록 하였다. 분석결과, 판재 폭이 큰 것을 사용할수록 스티프너를 제작하는데 사용되는 원 판재의 총 소요개수, 중량 및 비용이 감소하였으나, 최적의 LNG탱크용 스티프너 판재 폭을 결정하기 위해서는 소요 판재의 중량과 함께 비용의 분석이 필요하였다.