• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.37-41
• /
• 2004

The purpose of this study is to help the education of fire safety in elementary schools be given effectively by teachers through the investigation of their recognition on fire safety. To achieve the purpose, 203 elementary school teachers in Yeongju city were interviewed for 5 days from Sep. 5 to 9, 2003. The results of this study are as follows; Teachers recognized the education of fire safety to be very necessary, but they gave less consequence to it relatively and classes for fire safety were done quite a little in actual education. Teachers put the traffic safety on the top in the list of safety education and play safety, facility safety and fire safety follows it in order. Teachers stated lack of interest (36.0%), lack of material and class hours(31.5%) for the difficulty of the fire safety education and they recognized that a fire safety expert's lecture(62.1 ％) and development and propagation of teaching material were required for the efficient fire safety education.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.407-415
• /
• 2022

Surface coating of cathodes is an essential process for all-solid-state batteries (ASSBs) based on sulfide electrolytes as it efficiently suppresses interfacial reactions between oxide cathodes and sulfide electrolytes. Based on computational calculations, Li₃PO₄ has been suggested as a promising coating material because of its higher stability with sulfides and its optimal ionic conductivity. However, it has hardly been applied to the coating of ASSBs due to the absence of a suitable coating process, including the selection of source material that is compatible with ASSBs. In this study, polyphosphoric acid (PPA) and (NH₄)₂HPO₄ were used as source materials for preparing a Li₃PO₄ coating for ASSBs, and the properties of the coating layer and coated cathodes were compared. The Li₃PO₄ layer fabricated using the (NH₄)₂HPO₄ source was rough and inhomogeneous, which is not suitable for the protection of the cathodes. Moreover, the water-based coating solution with the (NH₄)₂HPO₄ source can deteriorate the electrochemical performance of high-Ni cathodes that are vulnerable to water. In contrast, when an alcohol-based solvent was used, the PPA source enabled the formation of a thin and homogeneous coating layer on the cathode surface. As a consequence, the ASSBs containing the Li₃PO₄-coated cathode prepared by the PPA source exhibited significantly enhanced discharge and rate capabilities compared to ASSBs containing a pristine cathode or Li₃PO₄-coated cathode prepared by the (NH₄)₂HPO₄ source.

• Journal of Radiation Protection and Research
• /
• v.28 no.3
• /
• pp.215-223
• /
• 2003

Against major release of radioactive material in nuclear power plant, Emergency Planning Zone(EPZ)s are typically established around nuclear power plants to effectively perform the public protective measures. The domestic methodology to determine the size of the EPZ is similar to that of Japan established in 1980, where calculations were based on the conservative accident source term. The objective of this study is to re-evaluate the validity of established EPZ, the area within the radius of $8{\sim}10km$ around domestic nuclear power plants, using the source terms covering full spectrum of accidents obtained from PSA study of ULJIN 3&4. To evaluate the risks of health effects, the computer code MACCS2(MELCOR Accident Consequence Code System2) was used. The result shows that the existing EPZ can reduce the probability of early fatality adequately for most of the source term categories(STCs) except for STC-14 and STC-19. In case of STC-14 and 19, the evacuation distance of 16km and 13km, respectively, are required. These distances can be reduced by improving emergency preparedness since the sensitivity studies for the public protective actions show that the magnitude of early fatality is largely affected by the time delays in notification and evacuation.

• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.163-176
• /
• 2007

Landslides which is one of the major natural hazard is defined as a mass movement of weathered material rock and debris due to gravity and can be triggered by complex mechanism. It causes enormous property damages and losses of human lift directly and indirectly. In order to mitigate landslide risk effectively, a new method is required to develope for better understanding of landslide risk based on the damaged cost produce, investment priority data, etc. In this study, we suggest a new evaluation method for slope stability using risk analysis. 30 slopes including 10 stable slopes, 10 slopes of possible failure and 10 failed slopes along the national and local roads are examined. Risk analysis comprises the hazard analysis and the consequence analysis. Risk scores evaluated by risk analysis show very clear boundaries for each category and are the highest for the failed slopes and the lowest for the stable slopes. The evaluation method for slope stability suggested by this research may define the condition and stability of slope more clearly than other methods suggested by others.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.139-146
• /
• 1999

The purpose of this study is to analyze the efficiency and working conditions of the patternwork departments by surveying the apparel manufacturing companies sampled in Seoul for their organization, working enviornment and technology of their patternwork departments, and thereby, find the ways to promote the functions of the patternwork department. The results of this study can be summarized as follows; 1. As a result of analyzing the working environment of patternwork departments, it was found that the problems counted by most of the pattern workers were lack of workforce, unhygienic or unpleasant workplaces. 2. As a consequence of analyzing the sample production in terms of tacking methods and times, They rarely tacked the white cotton. Such an omission of tacking procedure may serve to save time, but if a sewing error occurs, the working time would rather be longer due to the defects of pattern to be remedied. 3. As a result of reviewing the general patternwork conditions, it was found that the patterns were still worked out in two dimensions. On the other hand, more than 60% of the pattern workers were applying to their patternworks the styles which they had learned from their seniors. Few patterns are being developed in conformity to apparel trends or body shape changes. 4. As a consequence of examining the problems involving the production of patternsl, the problems involved primarily the patterns incised off no-dart pattern and body structure, and in light of items, involved mainly the trousers and in light of material, involved much the stretch or velvet. Moreover, it is deemed necessary to establish a special institute devoted to a systematic development of pattern technology. 5. Most of the CAD patternworks are used not for pattern designing but for grading and marking works, which suggests that pattern workers need to be educated on this new technology for more diverse and precise patternworks. 6. Lastly, as a result of examining the conditions of patternwork departments and their relevant works, most of the pattern workers were found to be subject to irregular and excessive workload, having little time to produce good patterns. This finding suggests that it is necessary to mandate the pattern workers to more involve the commodity planning.

• Resources Recycling
• /
• v.14 no.3
• /
• pp.16-36
• /
• 2005

The quantity of passenger cars in industrial countries has been significantly increased in recent years. According to prognoses, this tendency is likely to continue in the forthcoming future. As a direct consequence, an increase of End-of Life-Vehicles (ELV) will confront us with the problem of "ELV-Recycling". In order to cope with this situation, the European regulation for the treatment of End-of-Life-Vehicles (09/2000) has been transferred to national law in Germany (ELV-Regulation from 1 July 2002). The long term aim is to reduce residues from the ELV-treatment to less than 5 wt% from 30 wt% within the next 10 years (2015). For that reason, there is a need for innovative and more efficient recycling techniques tailored to future materials in automobiles. The design process at automotive industry is continuously changing due to the strong demand on optional equipment and new technical solutions for fuel saving. Light materials, such as aluminum and plastics, consequently become more important and cause a decrease of ferrous metals. Since plastic materials are often used as compounds, a separation into initial material types by means of mechanical recycling methods is not possible. For that reason, efficient recycling can only be realized by introducing recycling-friendly car designs. In the end an integrated approach of auto makers and recycling industry is of decisive significance for the fulfillment of future regulations.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.13-21
• /
• 2014

This study on condominium complex will adopt the quantitative assessment of the influence on the environment throughout the entire life cycle of buildings. This paper applies input-out analysis in order to analyse embodied energy regarding input of materials at material production phase. Also, it calculates environment load at use and demolition and destruction Phases of buildings as analysing energy consumption. The study categorises environment load as six impact categories and undertakes environmental impact evaluation. The consequence shows that the environment load of multi-unit dwelling takes up 88.2% out of the entire environment load of condominium complex. Also, as a result of analyzing the environmental impact of the life cycle of condominium buildings, it was found that such environmental impact comprised of about 11.96% of all industries in Korea that had an environmental impact.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.73.1-73.1
• /
• 2010

For the successful cold starting of a fuel cell engine, either internal of external heat supply must be made to overcome the formation of ice from water below the freezing point of water. In the present study, switchable vanadium oxide compounds as variable temperature-electrical resistance materials onto the surface of flat metallic bipolar plates have been prepared by a dip-coating technique via an aqueous sol-gel method. Subsequently, the chemical composition and micro-structure of the polycrystalline solid thin films were analyzed by X-ray diffraction, X-ray fluorescence spectroscopy, and field emission scanning electron microscopy. In addition, it was carefully measured electrical resistance hysteresis loop over a temperature range from $-20^{\circ}C$ to $80^{\circ}C$ using the four-point probe method. The experimental results revealed that the thin films was mainly composed of Karelianite $V_2O_3$ which acts as negative temperature coefficient materials. Also, it was found that thermal dissipation rate of the vanadium oxide thin films partially satisfy about 50% saving of the substantial amount of energy required for ice melting at $-20^{\circ}C$. Moreover, electrical resistances of the vanadium-based materials converge on an extremely small value similar to that of pure flat metallic bipolar plates at higher temperature, i.e. $T{\geq}40^{\circ}C$. As a consequence, experimental studies proved that it is possible to apply the variable temperature-electrical resistance material based on vanadium oxides for the cold starting enhancement of a fuel cell vehicle and minimize parasitic power loss and eliminate any necessity for external equipment for heat supply in freezing conditions.

• Journal of Gifted/Talented Education
• /
• v.27 no.1
• /
• pp.37-57
• /
• 2017

In terms of making more various geometrical figures than existing Tangram, Sphinx Puzzle has been used as a material for the gifted education. The main research subject of this paper is to verify how many convex polygons can be made by all pieces of a Sphinx Puzzle. There are several previous researches which dealt with this research subject, but they did not account for the clear reasons on the elementary level. In this thesis, I suggest using unit area and minimum area which can be proved on the elementary levels to account for this research subject. Also, I composed the program for the mathematically gifted elementary students, regarding the subject. I figured out whether they can make the mathematical justifications. I applied this program for three 6th grade students who are in the gifted class of the G district office of education. As a consequence, I found that it is possible for some mathematically gifted elementary students to justify that the number of convex polygons that can be made by a Sphinx Puzzle is at best 27 on elementary level.

• Microbiology and Biotechnology Letters
• /
• v.43 no.3
• /
• pp.280-285
• /
• 2015

Anti-oxidative and anti-inflammatory activities of Cotoneaster horizontalis Decne ethanol extract (CHEE) were evaluated. CHEE possessed a potent scavenging activity against 1,1-diphenyl-2-picryl hydrazyl, which was similar to the activity of ascorbic acid which was used as a positive control. CHEE also effectively suppressed hydrogen peroxide-induced reactive oxygen species on RAW 264.7 cells. Furthermore, CHEE induced the expression of the anti-oxidative enzyme heme oxygenase 1, and its upstream transcription factor, nuclear factor-E2-related factor 2. CHEE inhibited LPS induced nitric oxide (NO) formation as a consequence of inducible NO synthase (iNOS) down regulation. Taken together, these results provide us with an important new insight; that C. horizontalis possesses anti-oxidative and anti-inflammatory activities. Therefore, C. horizontalis may be utilized as a promising material in the field of nutraceuticals.