• ETRI Journal
• /
• v.45 no.6
• /
• pp.963-973
• /
• 2023

Non-orthogonal multiple access (NOMA) is considered a key candidate technology for next-generation wireless communication systems due to its high spectral efficiency and massive connectivity. Incorporating the concepts of multiple-input-multiple-output (MIMO) into NOMA can further improve the system efficiency, but the hardware complexity increases. This study develops an energy-efficient (EE) subchannel assignment framework for MIMO-NOMA systems under the quality-of-service and interference constraints. This framework handles an energy-efficient co-training-based semi-supervised learning (EE-CSL) algorithm, which utilizes a small portion of existing labeled data generated by numerical iterative algorithms for training. To improve the learning performance of the proposed EE-CSL, initial assignment is performed by a many-to-one matching (MOM) algorithm. The MOM algorithm helps achieve a low complex solution. Simulation results illustrate that a lower computational complexity of the EE-CSL algorithm helps significantly minimize the energy consumption in a network. Furthermore, the sum rate of NOMA outperforms conventional orthogonal multiple access.

• Journal of information and communication convergence engineering
• /
• v.16 no.1
• /
• pp.17-22
• /
• 2018

In massive multiple-input multiple-output (MIMO) systems, linear channel estimation algorithms are widely applied owing to their simple structures. However, they may cause pilot contamination, which affects the subsequent data detection performance. Therefore, herein, for an uplink multicell massive multiuser MIMO system, we consider using an alternating projection (AP) for channel estimation to eliminate the effect of pilot contamination and improve the performance of data detection in terms of the bit error rates as well. Even though the AP is nonlinear, it iteratively searches the best solution in only one dimension, and the computational complexity is thus modest. We have analyzed the mean square error with respect to the signal-to-interference ratios for both the cooperative and non-cooperative multicell scenarios. From the simulation results, we observed that the channel estimation results via the AP benefit the following signal detection more than that via the least squares for both the cooperative and non-cooperative multicell scenarios.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.237-253
• /
• 2019

For massive multiple-input multiple-output (MIMO) circumstances with time division duplex (TDD) protocol, pilot contamination becomes one of main system performance bottlenecks. This paper proposes an uplink pilot sequence assignment to alleviate this problem for spatially correlated massive MIMO circumstances. Firstly, a single-cell TDD massive MIMO model with multiple terminals in the cell is established. Then a spatial correlation between two channel response vectors is established by the large-scale fading variables and the angle of arrival (AOA) span with an infinite number of base station (BS) antennas. With this spatially correlated channel model, the expression for the achievable system capacity is derived. To optimize the achievable system capacity, a problem regarding uplink pilot assignment is proposed. In view of the exponential complexity of the exhaustive search approach, a pilot assignment algorithm corresponding to the distinct channel AOA intervals is proposed to approach the optimization solution. In addition, simulation results prove that the main pilot assignment algorithm in this paper can obtain a noticeable performance gain with limited BS antennas.

• ETRI Journal
• /
• v.42 no.3
• /
• pp.333-340
• /
• 2020

We consider a hybrid combiner design for downlink massive multiple-input multiple-output systems when there is residual inter-user interference and each user is equipped with a limited number of radio frequency (RF) chains (less than the number of receive antennas). We propose a hybrid combiner that minimizes the mean-squared error (MSE) between the information symbols and the ones estimated with a constant amplitude constraint on the RF combiner. In the proposed scheme, an iterative alternating optimization method is utilized. At each iteration, one of the analog RF and digital baseband combining matrices is updated to minimize the MSE by fixing the other matrix without considering the constant amplitude constraint. Then, the other matrix is updated by changing the roles of the two matrices. Each element in the RF combining matrix is obtained from the phase component of the solution matrix of the optimization problem for the RF combining matrix. Simulation results show that the proposed scheme performs better than conventional matrix-decomposition schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.2893-2907
• /
• 2019

Wireless mobile communication systems in subway tunnels have been widely researched these years, due to increased demand for the communication applications. As a result, an accurate model is essential to effectively evaluate the communication system performance. Thus, a neoteric three-dimensional (3D) geometry-based stochastic model (GBSM) is proposed for the massive multiple-input multiple-output (MIMO) fading channels in tunnel environment. Furthermore, the statistical properties of the channel such as space-time correlation, amplitude and phase probability density are analyzed and compared with those of the traditional two-dimensional (2D) model by numerical simulations. Finally, the ergodic capacity is investigated based on the proposed model. Numerical results show that the proposed model can describe the channel in tunnels more practically.

• ETRI Journal
• /
• v.41 no.4
• /
• pp.426-436
• /
• 2019

In time division duplex (TDD)-based multiuser massive multiple input multiple output (MIMO) systems, the uplink channel is estimated and the results are used in downlink for signal detection. Owing to noisy uplink channel estimation, the downlink channel should also be estimated for accurate signal detection. Therefore, recently, a blind method was developed, which assumes the use of a linear high-power amplifier (HPA) in the base station (BS). In this study, we extend this method to a scenario with a nonlinear HPA in the BS, where the Bussgang decomposition is used for HPA modeling. In the proposed method, the average power of the received signal for each user is a function of channel gain, large-scale fading, and nonlinear distortion variance. Therefore, the channel gain is estimated, which is required for signal detection. The performance of the proposed method is analyzed theoretically. The simulation results show superior performance of the proposed method compared to that of the other methods in the literature.

• ETRI Journal
• /
• v.45 no.6
• /
• pp.952-962
• /
• 2023

In this study, a space-time transmission scheme is proposed to tackle the limitations of channel estimation with orthogonal pilot information in colocated multiple-input multiple-output systems with several transmitting and receiving antennas. Channel information is obtained using orthogonal pilots. Channel estimation introduces pilot heads required to estimate a channel. This leads to bandwidth insufficiency. As a result, trade-offs exist between the number of pilots required to estimate a channel versus spectral efficiency. The detection of data symbols is performed using the maximum likelihood decoding method as it provides a consistent approach to parameter estimation problems. The moment-generating function of the instantaneous signal-to-noise ratio is used to drive an approximate expression of the symbol error rate for the proposed scheme. Furthermore, the order of diversity is less by one than the number of receiver antennas used in the proposed scheme. The effect of the length of a pilot sequence on the proposed scheme's performance is also investigated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.7
• /
• pp.2027-2046
• /
• 2024

Reconfigurable Intelligent Surface (RIS) is an innovative technique to precisely control the phase of incident signals with the help of low-cost passive reflective elements. It shows excellent potential in the sixth generation of mobile communication systems, which not only extends wireless coverage but also boosts channel capacity. Considering that multipath propagation and a high number of antennas are involved in RIS in assisted mega multiple-input multiple-output (MIMO) systems, it suffers from severe channel fading and multipath effects, which in turn lead to signal instability and degradation of transmission performance. To overcome this obstacle, this essay suggests an improved gradient optimization algorithm to dynamically and optimally adjust the phase of the reflective elements to counteract channel fading and multipath effects as a strategy. In order to overcome the optimization problem of falling into local minima, this paper proposes an adaptive learning rate algorithm based on Adagrad improvement, which searches for the global optimal solution more efficiently and improves the robustness of the optimization algorithm. The suggested technique helps to enhance the estimate of channel efficiency of RIS-assisted large MIMO systems, according to simulation results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.10
• /
• pp.2840-2856
• /
• 2024

Massive multiple-input multiple-output (MIMO) has emerged as a pivotal technology to address the escalating communication demands of Internet of Things (IoT). To meet the data transmission needs in IoT systems, we propose an antenna selection method of massive MIMO systems and joint power allocation strategy considering IoT user devices grounded in quantum energy valley optimization (QEVO) in this paper. The derivation of a maximum energy efficiency equation has been established to optimize system resources and provide high quality of service meeting the IoT user devices requirements. To tackle the nonlinear, multiconstrained hybrid optimization challenge proposed for massive MIMO resource allocation in IoT systems, we introduce a quantum energy valley optimization algorithm. This algorithm harnesses the strengths of quantum computation and energy valley optimization (EVO) mechanisms. Simulations indicate that our proposed method can efficiently meet real-time user transmission requirements while markedly enhancing system energy efficiency. When compared with existing power allocation strategies and optimization algorithms applied in massive MIMO communication systems, our approach demonstrates superior performance. The proposed method demonstrates the highest performance across various simulation scenarios when applied to both allocation strategies and system energy efficiency. Our proposed method with highest performance can be properly used on massive IoT devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.3
• /
• pp.216-221
• /
• 2013

In this paper, wireless channel characteristics of massive MIMO system is analyzed by comparing angular spread, cross polarization discrimination(XPD) and delay spread of dual polarized 4 and 128 transmit array antenna systems, by using 3D rat-tracing simulator, Wireless Insite in microcell environments. The analysis shows that increasing the number of transmit antennas results in the smaller angular spread and delay spread, and the higher value of XPD.