• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3361-3370
• /
• 1996

Micro-Macro approach is conducted for the mixture solidification to handle the closely linked phenomena of microscopic solute redistribution and macroscopic solidification behavior. For this purpose, present work combines the efficiency of mixture theory for macro part and the capability of microscopic analysis of two-phase model for micro part. The micro part of present study is verified by comparison with experiment of Al-4.9 mass% Cu alloy. The effect of back diffusion on the macroscopic variables such as temperature and liquid concentration, is appreciable. The effect, however, is considerable on the mixture concentration and eutectic fraction which are indices of macro and micro segregation, respectively. According to the diffusion time, the behavior near the cooling wall where relatively rapid solidification permits short solutal diffusion time, approaches Scheil equation limit and inner part approaches lever rule limit.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.10a
• /
• pp.78-88
• /
• 1996

It is important to understand the process of IT diffusion between organizations for meeting effectively IT progress and its changes. The previous studies provide, the process of IT diffusion between organizational members, organizational factors facilitating the assimilation of IT within the organization, and the organizational members' usage of communication channels in the IT adoption process. But they failed to provide comprehensively the diffusion process of IT between organizations. Therefore, an empirical research through a field survey has been performed to examine the diffusion process of RDB with 64 companies to overcome the limits of the previous studies. The purpose of this study is (1) to empirically examine the interaction of companies(prior adopters and potential adopters), (2) to look into the differences of the factors of organizational structure and the periods of RDB adoption process between OAE(Organizations Adopting Earlier) and OAL(Organizations Adopting Later), and the importance of communication channels used in IT planning stage and adoption stage, (3) to inquire into the difference of RDB performance between OAE and OAL. The results of this study indicate that there is no interaction between the prior adopters and the potential adopters. Also, there are great significant differences with regards to variables of CEO's age, CEO's concern on IT, formalization, centralization compensation systems, CIO's attitudes on changes, RDB adoption periods, performance of RDB. In addition, interpersonal channels have been much more used than mass communication channels in both IT planning stage and adoption stage. This study provides good guidelines to the companies and the vendors in shaping the strategies of IT adoption and IT diffusion respectively.

• Journal of Hydrogen and New Energy
• /
• v.20 no.6
• /
• pp.479-484
• /
• 2009

The effect of anode gas channel height on gas diffusion and cell performance in a 100 $cm^2$ class molten carbonate single cell is investigated. Single cell separators with three different channel height are used. The effect of the gas channel height on the distribution of the reactive gas concentration is evaluated by the two-dimensional concentration diffusion equation. The overpotential caused by concentration drop with different channel height is estimated by the voltage decay related to diffusion of reactants, well known as concentration polarization, using limiting current density. The estimation could have the possibility to identify the reactant mass transfer polarization in the complicate factors of the overall electrodes.

• Investigative Magnetic Resonance Imaging
• /
• v.19 no.4
• /
• pp.231-236
• /
• 2015

A 17-year-old girl presented with complaints of headache and decreasing vision of one month's duration, without any history of fever, weight loss, or any evidence of an immuno-compromised state. Her neurological examination was normal, except for papilledema. Laboratory investigations were within normal limits, except for a slightly increased Erythrocyte Sedimentation Rate (ESR). Non-contrast computerized tomography of her head revealed complex mass in left frontal lobe with a concentric, slightly hyperdense, thickened wall, and moderate perilesional edema with mass effect. Differential diagnoses considered in this case were pilocytic astrocytoma, metastasis and abscess. Magnetic resonance imaging (MRI) obtained in 3.0 Tesla (3.0T) scanner revealed a lobulated outline cystic mass in the left frontal lobe with two concentric layers of T2 hypointense wall, with T2 hyperintensity between the concentric ring. Moderate perilesional edema and mass effect were seen. Post gadolinium study showed a markedly enhancing irregular wall with some enhancing nodular solid component. No restricted diffusion was seen in this mass in diffusion weighted imaging (DWI). Magnetic resonance spectroscopy (MRS) showed increased lactate and lipid peaks in the central part of this mass, although some areas at the wall and perilesional T2 hyperintensity showed an increased choline peak without significant decrease in N-acetylaspartate (NAA) level. Arterial spin labelling (ASL) and dynamic susceptibility contrast (DSC) enhanced perfusion study showed decrease in relative cerebral blood volume at this region. These features in MRI were suggestive of brain abscess. The patient underwent craniotomy with excision of a grayish nodular lesion. Abundant acid fast bacilli (AFB) in acid fast staining, and epithelioid cell granulomas, caseation necrosis and Langhans giant cells in histopathology, were conclusive of tubercular abscess. Tubercular brain abscess is a rare manifestation that simulates malignancy and cause diagnostic dilemma. MRI along with MRS and magnetic resonance perfusion studies, are powerful tools to differentiate lesions in such equivocal cases.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.2
• /
• pp.176-181
• /
• 2014

Primary non-Hodgkin lymphoma (NHL) of the breast is a very rare disease, and the mammographic and ultrasonographic findings of breast lymphoma are variable. There are several reports of magnetic resonance (MR) imaging findings in patients with breast lymphomas; however, few reports have described the findings observed on MR spectroscopy or the features of diffusion weighted (DW) imaging. The authors report the findings of classical MR imaging, MR spectroscopy and DW imaging of a 48-year-old woman and a 40-year-old woman with primary non-Hodgkin's lymphoma of breasts. Mammography and breast ultrasonography revealed a mass with circumscribed margin. The mass showed strong enhancement after contrast injection on MR imaging. DW imaging showed reduced diffusion and high-amplitude choline (Cho) peak at 3.22 ppm was detected by single voxel MR spectroscopy which was consistent with malignancy.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.369-375
• /
• 2018

Batch experiments were conducted to investigate the effects of operating parameters such as the temperature, initial concentration, contact time and adsorbent dosage on the adsorption of antibiotics amoxicillin (AMX) by waste citrus peel based activated carbon (WCAC). The kinetics and isotherm experiment data can be well described with the pseudo-second order model and the Langmuir isotherm model, respectively. The maximum adsorption capacity of AMX by WCAC calculated from the Langmuir isotherm model was 125 mg/g. The adsorption of AMX by WCAC shows that the film diffusion (external mass transfer) and the intraparticle diffusion occur simultaneously during the adsorption process. The adsorption rate is more influenced by the intraparticle diffusion than that of the external mass transfer as the particle size of WCAC increases, and the intraparticle diffusion is the rate controlling step. The thermodynamic parameters indicated that the adsorption reaction of AMX by WCAC was an endothermic and spontaneous process.

• Information Systems Review
• /
• v.10 no.3
• /
• pp.257-287
• /
• 2008

Grounded in the prior literatures on acceptance and diffusion of IT and innovation in the level of organization research, 3 major constructional factors such as Motivation, IT resistance, and IT change management were investigated to suggest propositions from 15 multi-cases of PLM from 6 different companies in Automotive OEMs and suppliers, and we posited that the diffusion is continued only when motivation is stronger enough to overcome IT resistance as a fundamental finding and basis of this research on PLM acceptance and diffusion. The Motivation was found to be initiated and categorized from three different factors such as environmental factors, organizational factors, and technological factors, providing key propositions for further research: (1)The Automotive suppliers, contrary to OEM, are affected more by the demand of inter-connectivity as an environmental factor, while the other factors are similarly influencing to them, (2)The big organizations are influenced more by the champion, while the small organizations get influenced more by leader. (3)When the trend, inter-connectivity and complexity get stronger, the motivation gets more strongly influenced by the perceived benefit in the technological context. Regarding Change management we suggests IT change management is supportive to overcome IT resistance and also to enforce Motivation, and the critical mass exists differently according to the market maturity adopted, and more market matured technology has lower critical mass, implies less requirement of IT change management than less market matured technology.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.5
• /
• pp.824-830
• /
• 1996

In order to minimize the deterioration of osmotic dried apple quality, the characteristics of mass transfer during osmotic dehydration such as solid gain(SG), weight reduction(WR) and moisture loss(ML) were investigated. Moisture and solid transfer were analyzed by Fick's law. The highest (equation omitted)E value was observed with severe browning at $60^{\circ}C.$ The concentration effect on (equation omitted)E were higher at high temperatures than at low temperatures. SG, WR and ML increased as immersion temperature, sugar concentration and immersion time increased. Higher concentration of sucrose led to more sucrose absorption resulting increase in SG. Diffusion coefficients of moisture increased with immersion temperature and sugar concentration. As concentration increased, diffusion coefficients of solids increased at $20^{\circ}C$ while it decreased at $40^{\circ}C$ and $60^{\circ}C.$ Arrhenius equation was appropriately explain the effect of temperature on diffusion coefficients. Moisture and solid diffusion showed high activation energy in 20 。Brix solution, compared with in 40 and 60 。Brix.

• Asia pacific journal of information systems
• /
• v.9 no.4
• /
• pp.125-142
• /
• 1999

The increased investment in technological innovations makes the investigation of factors affecting technology adoption more interesting. Several perspectives have been proposed to explain the determinants of information technology adoption. While the traditional innovation diffusion research streams try to explain and predict adoption behavior with the adopter's perceptions about the characteristics of the innovation itself, critical mass theorists argue that adoption behavior as a collective action is based on what their business partners are doing and whether there exists enough critical mass to justify the investment. Drawing on theses two perspectives, this study investigates the decision criteria in the adoption of information technology as innovation and factors affecting the decision criteria. The survey results reveal that the adoption behavior is affected both by innovation characteristics and by critical mass's activity. Correlation analysis, t-test, and stepwise regression models also show that as the environmental uncertainty is getting higher, adoption decision is affected more by what others are doing, and that highly competitive organizations seem to play the role of critical mass.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.3909-3913
• /
• 2011

In this paper we have carried out molecular dynamics simulations (MD) for model systems of liquid n-alkane oligomers ($C_{12}{\sim}C_{80}$) at high temperatures (~2300 K) in a canonical ensemble to calculate viscosity ${\eta}$, self-diffusion constants D, and monomeric friction constant ${\zeta}$. We found that the long chains of these n-alkanes at high temperatures show an abnormality in density and in monomeric friction constant. The behavior of both activation energies, $E_{\eta}$ and $E_D$, and the mass and temperature dependence of ${\eta}$, D, and ${\zeta}$ are discussed.