• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.67-72
• /
• 2003

Numerical calculation has been performed to investigate the effect of inlet configuration on the growth rate of GaN layer on the heated susceptor. The conventional single inlet, where the gas is mixed by force in the inlet, is compared with separated flow inlet. Two-parallel gas flow $H_{2}$ and $NH_{3}$ are separated by a plate with finite length which are also parallel to the susceptor. The effect of separated plate length, carrier gas and flow rate of each precursor on the mixing of reactant gases and growth rate were investigated. Furthermore the three dimensional model is employed to predict the transverse variation of growth rate.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.6
• /
• pp.301-308
• /
• 1999

According to the development of power electronic element(GTO, IGBT) and material for electrical machines(permanent magnet, super conductor), the technology for electrical machines is now a day rapidly developing. Here with, a novel electrical machine, based on the new conception of transverse flux configuration leads to a considerable increase in power density and enables simultaneously high efficiency. The designed and measured performance of transverse machine for railway traction system revealed a great potential of system improvements to reduce linear motor mass.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.1
• /
• pp.23-27
• /
• 2008

The effect of solution agitation on the copper electroless deposition process of ULSI (ultra large scale integration) interconnections was investigated by using physical, electrochemical and electrical techniques. It was found that proper solution agitation was effective to obtain superconformal copper configuration within the trenches of $130{\sim}80nm$ width. The transition of open potential during electroless deposition process showed that solution agitation induced compact structure of copper deposits by suppressing mass transfer of cuprous ions toward substrate. Also, the specific resistivity of copper layers was lowered by increasing agitation speed, which made the deposited copper particles smaller. Considering both copper deposit configuration and electric property, around 500 rpm of solution agitation was the most suitable for the homogeneous electroless copper filling within the ultra-fine patterns.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.427-429
• /
• 1999

According to the development of power electronic element(GTO. IGBT) and material for electrical machines(permanent magnet. super conductor), the technology for electrical machines is now a day rapidly developing. Here with, a novel electrical machine, based on the new conception of transverse flux configuration leads to a considerable increase in power density and enables simultaneously high efficiency. The transverse flux machine with PM excitation will be applied to gearless direct drives for railway traction system. The designed and measured performance of transverse machine for railway traction system revealed a great potential of system improvements to reduce linear motor mass.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.16 no.2
• /
• pp.37-43
• /
• 2008

The air and water flow distributions are experimentally studied for a round header - ten flat tube configuration. Three different inlet orientation modes (parallel, normal, vertical) were investigated. Tests were conducted with downward flow configuration for the mass flux from 70 to $130kg/m^2s$, quality from 0.2 to 0.6, non-dimensional protrusion depth (h/D) from 0,0 to 0.5. It is shown that, for almost all the test conditions, vertical inlet yielded the best flow distribution, followed by normal and parallel inlet. Possible explanation is provided using flow visualization results.

• Biomolecules & Therapeutics
• /
• v.31 no.5
• /
• pp.566-572
• /
• 2023

A chiral derivatization strategy with phenylglycine methyl ester (PGME) was employed to develop a straightforward method to determine the absolute configurations of N,N-dimethyl amino acids. The PGME derivatives were analyzed using liquid chromatography-mass spectrometry to identify the absolute configurations of various N,N-dimethyl amino acids based on their elution time and order. The established method was applied to assign the absolute configuration of the N,N-dimethyl phenylalanine in sanjoinine A (4), a cyclopeptide alkaloid isolated from Zizyphi Spinosi Semen widely used as herbal medicine for insomnia. Sanjoinine A displayed production of nitric oxide (NO) in LPS-activated RAW 264.7 cells.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.41.2-41.2
• /
• 2017

Discovered as the second highest S/N detection of the Planck SZ survey, PLCK G287.0+32.9 is a massive galaxy cluster that belongs to a rare collection of merging clusters that exhibit two radio relics and a radio halo. A feature that makes this cluster even more unique is the separation of the radio relics with one $\sim 400$ kpc to the north-west of the X-ray peak and the other $\sim 2.8$ Mpc to the south-east. This asymmetric configuration requires a complex merging scenario. A key to gaining insight into the events that caused the formation of the merging features is to understand the dark matter mass distribution. Using a weak-lensing technique on deep Subaru and Hubble Space Telescope observations, we map the dark matter mass distribution of PLCK G287.0+32.9. Our investigation detects five significant mass structures. The mass is dominated by a primary structure that is centered near the X-ray peak of the intracluster medium. Four lesser mass structures are detected with two located within $\sim 1\arcmin$ of the primary mass structure, a third to the north-west, and a fourth near the south-east radio relic. Along with these detections, we estimate the mass of each structure and relate their distributions to the intracluster medium and galaxy distributions. In addition, we discuss the relation of the mass structures to the formation of the relics and plausible merging scenarios.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.389-394
• /
• 2010

This paper describes the conceptual design of mass memory unit for high speed data processing and mass memory management in the STSAT-3 compared to that of STSAT-2. The FPGA directly controls the data receiving from two payloads with the maximum 100Mbps speed and 32Gb mass memory management to satisfy these requirements. We used SRAM-based FPGA from XILINX having fast operating speed and large logic cells. Therefore, the Triple Modular Redundancy(TMR) and configuration memory scrubbing techniques will also be used to protect FPGA from Single Event Upset(SEU) in space.

• Journal of the Korean Society of Safety
• /
• v.13 no.3
• /
• pp.11-23
• /
• 1998

In this study, collapse test of thin-walled structure is performed under axially quasi-static and impact load in collapse characteristic to develop the optimum structural member for a light-oriented automobile. Furthermore, the energy-absorbing capacity is observed according to the variety of configuration(circular, square), aspect ratio in aluminum specimen to obtain basic data for the improved member of vehicle. In both quasi-static and impact collapse test, Al circular specimens collapse, in general, with axisymmetric mode in case of thin thickness while collapse with non-axisynmetric mode according to the thickness increase. For Al rectangular specimens, they collapse with axisymmetric mode in case of thin thickness, with mixed collapse mode according to the increase of thickness. In terms of initial max. load, Al square specimen turns out the best member among specimens, and then Al square, circular and circular with large scaling ratio, respectively. In case of quasi-static compression test, the absorbed energy per unit volume and mass shows higher in Al circular specimen, and then Al square, circular with large scaling ratio, respectively, according to shape ratio the absorbed energy per unit volume and mass in case of max. impact compression load is higher than that of static load. But the absorbed energy per unit volume and mass shows that Al circular specimen is the best member. Especially, unlike max. compression loan, the absorbed energy per unit volume and mass in impact test turns out the low value.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.1001-1006
• /
• 2012

This paper presents a carbon nanotube (CNT) triode-structure field emitter as an ion source in a micro time-of-flight mass spectrometer(TOF-MS). In the ion source by field emission, the electrons emitted from cathodes under an electric field accelerated to the anode and ionize gas molecules by impact before arriving the anode. The generated positive ions are to be accelerated to the ion collector. Whereas most of ions are drawn to the cathodes in diode field emitters, a grid in the triode field emitter prevents the ions from being drawn to the cathodes. The triode field emitter is fabricated by micromachining. The cathode is composed of six CNT cylinders. The total size of the fabricated device is $8.0{\times}7.3{\times}1.9mm^3$. The anode and the grid current of the fabricated CNT field emitter were measured for various anode and grid voltages. When the anode and the grid voltages are 1000 V and 990 V, respectively, the emission current passing through the ionization region is 8.6 ${\mu}A$, which is a sufficient emission current for ionization and mass spectrometry.