• 한국기계가공학회지
• /
• 제18권6호
• /
• pp.76-81
• /
• 2019

In the mold-manufacturing field, various methods of advanced production technology are being used in the production of industrial-grade gear pulleys. Among the current methods are injection molding, hoop molding, insight molding, two-material molding, compound-mold molding, as well as engineering plastic mold. Currently, casting pulleys are inexpensive because they are produced in small quantities. However, they produce complications during the manufacturing process, are very unreasonable for mass production, and are disadvantageous in cost competitiveness. Pulleys are divided into hundreds of kinds and thousands of kinds, so the production methods vary. As these pulleys are made of a single material by a casting and welding method, they are not manufactured using injection molds consisting of different materials. In this research, pulleys, shafts, and reinforced plastic materials were incorporated using ANSYS software, and a low-cost, lightweight technology was applied for trial production with optimum design and extrusion technology.

• 품질경영학회지
• /
• 제14권1호
• /
• pp.11-18
• /
• 1986

Whereas in non-symmetrical distribution manufacturing process they are not plotted relatively on the centeral line but plotted on the skew of right-hand side or left-hand side. That is to say, for the prupose of producing either upper-specification-oriented items or lower-specification-oriented items, and when we carry out tighter control so as to have them pass only its specifications, the distribution shape naturally has a non-normal distribution. In these cases, we could use either compressed control limits or variable transformed logarithm control charts. It the above mentioned methods were not available, we should use special purpose control chart-Mode control chart or Gram-Charlier control chart. These are proper methods for manufacturing process control which uses control chart method. In spite of these methods, domestic manufacturing and mining companies are utterly ignorant about these methods. That invites practical problems in their companies. To enhance this improvements, I proved the property of practical applications of control chart method by comparing and analyzing the case studies of practical application of speical purpose control chart method, and also by introducing the application methods.

• 복식
• /
• 제58권8호
• /
• pp.63-73
• /
• 2008

From the ancient Korea to the late Joseon Korean fur and leather had been preferred in and out of Korea for their good quality and excellent manufacturing skill. Since Unified Silla (A.D.676${\sim}$A.D.936) Korean fur and leather were manufactured divisionally by workmen specialized in materials and products, and such manufacturing process was succeeded to Goryeo and Joseon. Manufacturing of fur and leather was consisted of as follows: hunting and butchering - peeling - beating with a paddle and removing fat - oil manufacturing - drying - tanning, then cutting and sewing, and there was a special caring method. In order to make good fur and leather, each process of manufacturing needed particular techniques and all available methods were tried to have tender fur and leather by using smoking, excrement, lime, vegetable tannin and even cerebral liquid. And also required mouth-chewing and hand-pounding with a lot of time and of labor Keeping furs resilience and flexibility, sowing several skins together, even when the after-all-process skin was converted into clothes, was much more difficult than sewing fabric. Thus, the manufacturing cost was as much expensive as skin materials, and the volume of manufacturing of fur and leather was also limited. Therefore, fur and leather must have been popular for scarcity value in the manufacturing process, and this scarcity must have caused an extreme luxury of fur.

• 대한본초학회지
• /
• 제28권4호
• /
• pp.71-76
• /
• 2013

Objectives : The biological activities and compound contents of herbal medicine vary depending on manufacturing processes. In this study, we compared anti-inflammatory effects and compound contents of three kinds of multi-herbal extract HT008 produced by different manufacturing processes in order to determine chemical and biological equivalence. Methods : HT008 was produced by three different manufacturing methods: 1. Freeze dried extract of Eleutherococcus senticosus, Scutellaria baicalensis and Angelica sinensis (HT008 FD), 2. Spray dried extract of E. senticosus and S. baicalensis combined with reflux extract of A. sinensis (HT008 SD), 3. Spray dried extract of E. senticosus and S. baicalensis combined with supercritial fluid extract of A. sinensis (HT008 SF). Anti-inflammatory effects were evaluated using acetic acid induced pain model and ${\lambda}$-carageenan induced paw edema model. Compound contents were evaluated by HPLC quantitative analysis of standard compounds of HT008, eleutheroside E, baicalin, z-ligustilide. Results : HT008 FD, HT008 SD and HT008 SF significantly decreased acetic acid induced pain index and ${\lambda}$-carrageenan induced paw edema volume compared with that of control group. There was no significant difference in efficacy among the HT008 FD, HT008 SD and HT008 SF. Standard compound contents of HT008 FD, HT008 SD and HT008 SF were quantified within the range of Korean pharmacopoeia or other research. Conclusions : Three different manufacturing methods of multi-herbal extracts have been developed without noticeable difference in the efficacy or compound contents. The results might be used to establish manufacturing process and industrialization of herbal extracts.

• 대한치과보철학회지
• /
• 제59권3호
• /
• pp.370-378
• /
• 2021

목적: 본 연구의 목적은 CAD-CAM 방식으로 제작한 RPD framework의 제조 과정 및 제작 방법에 따른 적합도를 문헌 고찰을 통해 평가하는 것이다. 재료 및 방법: 다음의 PICO (patient, intervention, comparison, and outcome) 질문과 관련한 특정 키워드를 이용하여 PubMed 데이터베이스 상에서 포괄적인 문헌 검색을 시행하였다: "제조 과정 및 제작 방식에 따라 디지털 RPD framework의 정확도에 차이가 있는가?" 결과: 총 7개의 문헌이 선택되었으며, 이 중 두 문헌에서 구강스캔과 모형스캔을 이용한 디지털 RPD framework의 정확도에 관하여 비교하였으나, 일관된 결과를 얻지 못하였다. 제작 방식에 따른 비교 문헌에서는 적층 가공 또는 절삭 가공을 통해 제작된 RPD framework 모두 임상적으로 허용가능한 수준의 정확도를 보였으며, PEEK (Polyetheretherketone) milling RPD framework가 전통적 주조방식으로 제작하거나 3D 프린팅으로 제작한 RPD framework보다 높은 적합도를 보였다. Milling RPD framework에서는 direct 방식으로 제작한 경우에 indirect 방식의 경우보다 우수한 적합도가 관찰되었으나, 3D 프린팅 RPD framework에서는 indirect 방식으로 제작한 경우에 더 높은 적합도를 보였다. 결론: CAD-CAM 기술을 이용하여 제작된 디지털 RPD framework는 제조 과정이나 방식에 관계없이 임상적으로 허용되는 수준의 정확도를 보였다. 구강스캔 또는 모형스캔의 디지털 인상 채득 방법에 따라서는 일관된 결과가 보고되지 않았으며, 추후 연구가 필요하다.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.115-125
• /
• 2016

The prototype SFR has currently been under design by KAERI. The size of its major components is much larger than that of APR1400 and high temperature materials are applied for it. The increased size of components and those specific materials effect on material procurement, manufacturing process and fabrication facilities. The manufacturing methods are studied for Reactor Vessel/Guard Vessel, Control Rod Drive Mechanism, Heat Exchanger, Primary Pump, Reactor Vessel Internals, Steam Generator and In-Vessel Transfer Machine. The proper manufacturing methods are suggested for each component including side forging technology for ultra large forgings of Reactor Vessel to minimize the weld seams on which In-service Inspection should be conducted.

• 산업공학
• /
• 제18권3호
• /
• pp.221-233
• /
• 2005

e-Manufacturing can be referred to as a system methodology enabling the integration of manufacturing operations and IT technologies to achieve objectives of an enterprise. It is recently regarded as a powerful solution to survive in a chaotic marketplace. While conducting an e-Manufacturing project, we first needed to capture collaborative processes conducted by multiple participants in order to define functions of a system supporting them. However, pervasive process modeling techniques including IDEF3, Petri nets, and UML are not sufficient for modeling collaborative processes. Therefore, we first briefly investigate several process modeling methods including aforementioned modeling methods and ARIS focusing on the collaboration point of view. Then, we propose a new modeling method referred to as Collaborative Process Modeling (CPM) to clearly describe collaborative processes. Also, we develop and illustrate a rule for transforming collaborative process models into Marked Graph models to use the analysis power of the Petri nets. Using CPM empowers us to develop collaborative process models with simple notations, understand and facilitate the realization of the collaboration, and verify models before rushing into the development.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.875-882
• /
• 2010

Nowadays, the global market requires a variety of products and shorter life cycle to fulfill the diverse demands of customers. To survive in the turbulent and competitive markets, automobile assembly companies must design and implement manufacturing systems that respond rapidly to market demands. In this paper, methods for reconfiguring system based on modular concept is proposed using AR(Augmented reality) technologies. First, the relationship matrixes between change drivers and system components are generated to divide existing manufacturing system to each module. And, new change drivers are selected based on required function in new system. Through the modification of relationship matrix, the concept design of new system is proposed and implemented in AR environment. Finally, according to proposed methods and procedure in this paper, the existing cockpit assembly system is reconfigured to spare tire assembly system as a case study. As the use of the modular-based reconfiguration method in AR environment, the time and cost for reconfiguring manufacturing system will be reduced dramatically.

• 산업경영시스템학회지
• /
• 제28권3호
• /
• pp.149-155
• /
• 2005

In this paper, we optimize simulation model of a manufacturing system using the real-coded genetic algorithm. Because the manufacturing system expressed by simulation model has stochastic process, the objective functions such as the throughput of a manufacturing system or the resource utilization are not optimized by simulation itself. So, in order to solve it, we apply optimization methods such as a genetic algorithm to simulation method. Especially, the genetic algorithm is known to more effective method than other methods to find global optimum, because the genetic algorithm uses entity pools to find the optimum. In this study, therefore, we apply the real-coded genetic algorithm to simulation optimization of a manufacturing system, which is known to more effective method than the binary-coded genetic algorithm when we optimize the constraint problems. We use the reproduction operator of the applied real-coded genetic algorithm as technique of the remainder stochastic sample with replacement and the crossover operator as the technique of simple crossover. Also, we use the mutation operator as the technique of the dynamic mutation that configures the searching area with generations.

• Journal of the Korean Wood Science and Technology
• /
• 제50권3호
• /
• pp.167-178
• /
• 2022

To investigate the influence of manufacturing environment on bonding performance of mixed cross laminated wood (CLT) using polyurethane (PUR) adhesive, a boiling water soak delamination test according to the temperature and relative humidity was conducted. The 5-ply mixed CLT consisted of Japanese Larch for external and middle layer and yellow poplar for internal layer. The PUR adhesives with different opening times of 10 and 30 minutes were used. The mixed CLT was manufactured according to pressing times of PUR and manufacturing environments of summer and winter. In case of summer environment, the delamination rate of the mixed CLT with pressing time of 4 hours using a PUR adhesive with open time of 10 minutes met the requirements of KS F 2081. In case of winter environment, the delamination rate of the mixed CLT didn't meet the requirements of KS standard. However, it was possible to confirm the effect of improving the adhesive performance by adjusting the pressing time according to the open time of the adhesive under the manufacturing conditions. The delamination rate of CLT with open time 30 minutes PUR, manufactured by indirect moisture supply methods was 11.2% better than direct moisture supply methods. As a result of delamination test in the same condition of relative humidity and adhesive, it was found that the temperature of manufacturing environment influences the adhesive performance.