• 공학교육연구
• /
• 제27권1호
• /
• pp.41-49
• /
• 2024

The purpose of this study is to explore ways to improve major satisfaction that can be applied by universities through the analysis of factors influencing major satisfaction of engineering college students. To this end, Korea-National Survey of Student Engagement(K-NSSE) data involving 814 students from T University were used, and logistic regression analysis and t-test were applied. The main results obtained through this are as follows. First, engineering college students' major satisfaction factors include major-career relevance, college immersion, and positive academic sentiment. Second, depending on the grade, it was confirmed that the factor of major-career relevance in the lower grades, and the factors of meaningful learning experience and college immersion in addition to major-career relevance in the upper grades had a significant influence. Third, the higher the meaningful learning experience, positive academic sentiment, and college immersion, including the major-career relevance, the higher the major satisfaction was found in the middle-class group with a score of BO or higher. This study is meaningful in that it revealed differences in influence by individual characteristics as well as major satisfaction influencing factors that can be practiced in universities such as learning experiences.

• 대한공업교육학회지
• /
• 제38권1호
• /
• pp.69-85
• /
• 2013

본 연구는 대학생의 전공-흥미 일치도, 스트레스대처방식과 학과적응 간에 어떠한 관계가 있는지 알아보고, Holland 일치성 가설에 위배되는 집단의 존재를 확인하기 위해 전공-흥미 일치도와 학과적응도 고저(高低)에 따른 네 집단 분류하였다. 또한 네 집단 간 스트레스대처방식의 차이를 확인하였다. 본 연구를 위해 4년제 대학교 재학생 321명을 대상으로 직업선호도검사(S형)의 직업적 흥미검사(일반성향검사), 스트레스대처방식검사(정유미, 2004), 학과적응척도(박성미, 2001)를 활용하여, 연구대상자의 일반적 특성, 전공-흥미 일치도, 스트레스대처방식에 대한 자료를 수집하였다. 수집된 자료는 PASW Statistics Data Editor 18.0 프로그램을 이용하여 상관분석, 중다회귀분석, 빈도분석, 공분산분석을 실시하였다. 본 연구의 주요결과는 다음과 같다. 첫째, 전공-흥미 일치도와 스트레스대처방식이 학과적응에 미치는 영향을 분석한 결과, 일치도는 학과적응에 유의미한 영향을 미치지 못하였으며, 스트레스대처방식 중 적극적 대처방식만 학과적응에 유의미한 영향을 나타내었다. 둘째, 전공-흥미 일치도와 학과적응도 고저에 따른 네 집단 분류를 한 결과 일치도가 높지만 학과적응도가 낮은 집단, 일치도가 낮지만 학과적응도가 높은 집단이 존재하고 있음을 확인하였다. 셋째, 전공-흥미 일치도와 학과적응도 고저에 따른 네 집단 간 스트레스대처방식의 차이를 확인한 결과, 집단 간 유의미한 차이가 발견되었다. 이러한 연구결과는 학과적응에 있어 전공-흥미 일치도 이외에 다른 요인도 고려해야 함을 나타내며, 특히 스트레스대처방식의 중요함을 보여준다. 따라서 학과적응 촉진을 위한 스트레스대처방식 훈련 및 프로그램 개발 등이 필요하다고 할 수 있다.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.459-465
• /
• 2017

한국에서 유학 생활을 하고 있는 유학생들의 수는 증가됨에 따라 한국어 전공이 활성화되고 있는 추세이다. 이러한 점을 고려할 때 외국인 유학생들의 전공 선택을 하는 동기와 그에 따른 전공만족도를 파악하는 것은 의의가 크다. 본 연구는 서울지역에 거주하고 있는 외국 유학생 173명을 대상으로 설문조사를 실시하였다. 자료분석은 SPSS 21.0과 AMOS 23.0을 사용하여 전공선택 동기와 전공만족도 간의 구조적 관계를 입증하였다. 분석결과, 외국인 유학생의 한국어 전공 선택동기는 내적동기, 외적동기로 구분되었고, 전공만족도는 인식만족, 관계만족, 교과만족, 일반만족으로 구분되었다. 한국어 전공 선택동기 중, 외적동기 수준이 매우 높게 나타났고, 전공만족도 중, 일반만족 수준이 가장 높은 것으로 나타났다. 또한 전공 선택동기 중, 외적동기와 내적동기는 모두 전공만족도인 인식만족, 관계만족, 교과만족, 일반만족에 모두 유의한 정(+)의 영향을 미치는 것으로 나타났다. 본 연구는 한국어 전공 유학생들의 전공만족도를 향상시키기 위하여 전공을 활용한 직장에 대한 정보 및 기회 제공, 양질의 교육과정을 제공해야한다는 효과적인 방법을 제언하였다.

• 대한치과보철학회지
• /
• 제45권4호
• /
• pp.431-443
• /
• 2007

Statement of problem: Injuries along with discomfort may result on the oral mucosa when non-rigid material is used as the major connector in construction of RPD, since nonrigid major connectors transmit unstable forces throughout the appliance. Titanium which recently draws attention as a substitute of Co-Cr had a difficulty in fabricating due to high melting temperature but the development of casting technique makes it possible to apply to the clinical case. Purpose: The purpose of this study was to investigate the rigidity and the castability of titanium upper major connector by design and make a comparison with Co-Cr major connectors which are widely used in clinical cases now. Material and methods: Casting was done using CP-Ti(Grage 2) (Kobe still Co., Japan) for the experimental groups, and 4 various designs namely palatal strap, U-shaped bar, A-P strap, and complete palatal plate were casted and 5 of each designs were included in each group. For the experimental group, Universal testing machine (Model 4502; Instron, Canton, Mass) was used to apply vertical torsional force vertically to the horizontal plane of major connector. In the second experiment, Vertical compressive force was applied to the horizontal plane of major connector. As a comparative group, Co-Cr major connector was equally manufactured and underwent the same experimental procedures Strain rate was measured after constant loading for one minute duration, and statistical analysis was done with SPSS ver.10.0 for WIN(SPSS. Inc. USA). From the one-way ANOVA and variance analysis (P=0.05), Scheffe's multiple comparison test implemented. Results: 1. Least amount of strain was observed with complete palatal plate followed by A-P bar, palatal bar, and the U-shaped bar having most amount of strain. 2. In all designs of titanium major connector, less strain rate was observed under compressive loading than under torsional loading showing more resistance to lateral force. 3. For titanium major connector, less strain rate was observed when the force is applied to the first premolar area rather than to the second molar area indicating more strength with shorter length of lever. 4. In Comparison of Co-Cr major connector with titanium major connector, palatal strap and U-shaped bar designs showed higher strength under torsional force that is statically significant, and under compressive force, no significant difference was observed expert for U-shaped bar. 5. In titanium major connector, complete palatal plate showed lowest success rate in casting when compared with the Co-Cr major connector. Conclusion: Above results prove that when using titanium for major connector, only with designs capable of generating rigidity can the major connector have almost equal amount of rigidity as Co-Cr major connector and show lower success rate in casting when compared with the Co-Cr major connector.

• 융합보안논문지
• /
• 제22권1호
• /
• pp.159-166
• /
• 2022

본 연구는 물리보안전공 대학생들의 전공 선택 동기가 전공만족도 및 진로결정에 미치는 영향을 파악하기 위해 설문조사를 수행하였다. 설문내용은 "첫째, 선택 동기, 둘째, 전공만족도, 셋째, 진로결정"으로 작성하였다. 본 연구에서는 변수의 신뢰도 및 중요도 분석, 탐색적 요인 등을 살펴보기 위해 Chronbach's Alpha 수치를 산출하고 베리맥스(Berimax) 방식을 실시하였다. 측정항목들의 AVE 값과 CR 값 모두 기준치 0.7 이상으로 산출되어 각 항목들의 집중타당성이 우호적인 것으로 조사되었다. 가설검증결과에서 표준화계수를 보면 '선택 동기 ⇨ 전공만족도'는 0.653으로, '전공만족도 ⇨ 진로결정'은 0.403으로 산출되어 두 연구가설은 채택되었으나 '선택 동기 ⇨ 진로결정'은 0.392로 기각되었다. 향후 경호전공 대학생들의 진로결정을 향상시키기 위해서는 선택 동기와 전공만족도를 동시에 높여주기 위해 대학과 관련 교수들의 노력이 더욱 필요해 보인다.

• 한국학교ㆍ지역보건교육학회지
• /
• 제13권2호
• /
• pp.17-27
• /
• 2012

Objectives: The purpose of this study was an attempt to improve the major satisfaction to verify the correlation of major satisfaction according to social support types of health administration major students. Methods: The subjects were 380 students with major in the Dept. of public health administration from 2 universities and 2 colleges located in Incheon city, Gyeonggi province, and Chungcheognam province. Data were collected from June 2 to 20, 2008 using structured questionnaires. Results: The study question are following : Social support type was sorted into three groups. Types of social support were classified high-support type, low-professor type, low-support type. Major satisfaction was the highest in the high-support type. The correlation between social support type and major satisfaction was the sequence correlation, low-professor type and low-support type were the reverse correlation. Conclusions: In conclusion, Students can improve of major satisfaction through study group activities, systemic learning and career counseling. Professors and students are improve solidarity through open communication methods.

• 기본간호학회지
• /
• 제9권3호
• /
• pp.424-433
• /
• 2002

This study was done to compare death orientation scores for student nurses before and after studying a major. The participants were 130 student nurses before the major and 123 student nurses after the major at C university in Kwang Ju city. The data were gathered from March, 1998 to September, 2001 using a questionnaire. The data were analysed by Chi square test, t-test, ANOVA and Pearson correlation coefficients. The results of this study are summarized as follows ; 1 The mean scores for death orientation before and after the major were 57.8 and 60.2 respectively. The mean score of death orientation after the major tended to be higher than before but they were not significantly different. 2. There were significant differences in death orientation scores between the two groups before the major for 'physical function (F=3.83, p=.023)' and 'attending a lecture on spiritual nursing (F=2.58, p=.010)'. After the major there were significant difference for 'feeling of health (F=4.76, p= .001)'. 3. The death orientation scores before the major showed an inverse correlation with religiosity score (r=-.239, p=.006). After the major there was no correlation with religion.

• 패션비즈니스
• /
• 제11권3호
• /
• pp.59-68
• /
• 2007

This study examined knowledge and hair care behaviors of hair and scalp on UV(ultraviolet) comparing beauty care major and non-major female students. Results were obtained by questionnaire in 159 students majoring in beauty care and 198 students not majoring, was used frequency analysis, varimax rotation, t-test, F-test, Tukey post test. The analysis was statistically processed by using SPSS 12.0 program. The knowledge of hair and scalp on UV associated with a major showed significant on hair damage, in the UV, hair, scalp, hair damage, and UV and hair-related items, suggesting higher level in major female students. The results of care behaviors of UV and hair and scalp knowledge associated with a major. Correlation of care behaviors with a major showed significant results. For correlation by subfactor, there was significant difference in self-care, habitual care, and washing care between two groups, but there was no significant difference in protection care. It was found that both major and non-major students did not receive professional care.

• 공학교육연구
• /
• 제19권6호
• /
• pp.10-19
• /
• 2016

This study was conducted to explore the major adjustment factors in undergraduates by investigating the characteristics of group which doesn't correspond to Holland's congruence assumption. For this study, 313 sophomore year undergraduates in engineering were surveyed. The results of this study showed as follows. First, the group which doesn't correspond to Holland's congruence assumption represented 16.6% of all. Second, there were significant differences of basic psychological needs among four groups by interest-major congruence and major adjustment. These findings imply that major selection in congruence with interest is not critical and we should also consider basic psychological needs(autonomy, competence, relatedness) for engineering major adjustment.

• 공학교육연구
• /
• 제17권4호
• /
• pp.95-101
• /
• 2014

As other major, students have difficulties to be successfully adapted to computer science major without some interest and skill to computer programming. In this paper, we try to find successful factors for computer science major freshmen students to computer programming. The factors we focused are programming experience before college entrance, taking liberal arts/natural science courses at high school, application motivations to computer major, existence of mentors, satisfaction to his/her computer department, student's holland job aptitude code. After analysis, taking liberal arts/natural science courses at high school, satisfaction to computer department, some holland job aptitude code are significant to their successful adaptation to computer major. Also, we found the holland job apptitude code is closely related to student's satisfaction to their major for engineering students including computer science students. Our analysis results will be a suggestion for designing computer science education program with students who enters college without some aptitude or preparation to his major.