• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.225-228
• /
• 2008

SC벽체는 뛰어난 후좌굴성의 특성을 지니고 있고 연성능력이 뛰어나 원자력 건물과 같은 주요건물에 주로 사용되고 있고 최근 국내 실정에 맞는 강도식 산정을 연구 중에 있다. 최근 일본학회(JEAG)에서 제안한 면외 전단강도식은 전단스팬비에 의한 아치강도를 지나치게 단순화한 경향이 있고, 짧은 전단스팬비에서 아치강도와 전단균열강도를 분리하여 대소관계로써 결정하고 있어 강도식을 재정립할 필요가 있다. 아치작용의 본질은 전단을 지점으로 직접 전달하는 것이고, 아치단부가 최대로 압축받지 않는 경우가 많으므로, 스터드에 의한 콘크리트와 강판의 부착강도와 평형관계를 통해 아치강도를 결정한다. 실험체 제작은 일본학회에서 실험한 내용과 같이, 원자력 벽체에 가해지는 하중형태를 단순화하고 벽체를 연속보의 형태로 가정, 전단스팬비를 변경하면서 면외전단실험을 진행한 후 강도식과 검증을 실시하였다. 전단스팬비 이외에도 스터드의 밀집도, 스터럽에 의한 전단보강 정도를 변수로 하여 실험결과를 비교 검증하였다. 예상식과 실험결과는 일본의 기존 강도식에 비해 비교적 접근하는 결과를 얻을 수 있었다.

• 한국가스학회지
• /
• 제21권6호
• /
• pp.8-14
• /
• 2017

가스배관 사고의 대표적인 원인 중 하나는 기계적 충격(타공사 등)으로 인한 사고이다. 이는 국내 주요 산업단지에 매설되어 있는 고압가스배관의 대다수가 매설 시기가 20년 이상인 노후 배관이기 때문에 사고 발생 시 별도의 검사 및 보강 시간 없이 대형 사고로 이어질 가능성이 높다. 본 연구에서는 타공사(굴착공사) 실험을 통해 기계적 충격 시 배관에 미치는 결함 정도에 대해 연구하였다. 실제 산업단지에서 굴착공사 시 사용되고 있는 21 ton 굴착기와 ASTM A106 Grade.B와 ASTM A53 Grade.B 배관을 이용해 타격실험을 진행하였다. 그 결과 굴착기 작업에 이용되는 버켓 중 톱니 버켓 일 때 결함의 정도가 더 컷으며, 매설되어 있는 배관의 관경이 작을수록 결함의 깊이 및 길이가 큰 것을 확인하였다. 굴착기 작업 중 타격 높이는 매설 배관의 결함에 아무런 영향을 미치지 않는 것을 확인하였다.

• Earthquakes and Structures
• /
• 제9권3호
• /
• pp.481-501
• /
• 2015

Current design codes and technical recommendations often provide rough indications on how to assess effective stiffness of Reinforced Concrete (R/C) frames subjected to seismic loads, which is a key factor when a linear analysis is performed. The Italian design code (NTC-2008), Eurocode 8 and ACI 318 do not take into account all the structural parameters affecting the effective stiffness and this may not be on the safe side when second-order $P-{\Delta}$ effects may occur. This paper presents a study on the factors influencing the effective stiffness of R/C beams, columns and walls under seismic forces. Five different approaches are adopted and analyzed in order to evaluate the effective stiffness of R/C members, in accordance with the scientific literature and the international design codes. Furthermore, the paper discusses the outcomes of a parametric analysis performed on an actual R/C building and analyses the main variables, namely reinforcement ratio, axial load ratio, concrete compressive strength, and type of shallow beams. The second-order effects are investigated and the resulting displacements related to the Damage Limit State (DLS) under seismic loads are discussed. Although the effective stiffness increases with steel ratio, the analytical results show that the limit of 50% of the initial stiffness turns out to be the upper bound for small values of axial-load ratio, rather than a lower bound as indicated by both Italian NTC-2008 and EC8. As a result, in some cases the current Italian and European provisions tend to underestimate second-order $P-{\Delta}$ effects, when the DLS is investigated under seismic loading.

• Structural Engineering and Mechanics
• /
• 제32권2호
• /
• pp.251-267
• /
• 2009

Reinforced concrete (RC) structures consist of two different materials: concrete and steel bar. The stress transfer behaviour between the two materials through bond plays an important role in the load-carrying capacity of RC structures, especially when they subject to lateral load such as blast and seismic load. Therefore, bond and slip between concrete and reinforcement bar will affect the response of RC structures under such loads. However, in most numerical analyses of blast-induced structural responses, the perfect bond between concrete and steel bar is often assumed. The main reason is that it is very difficult to model bond slip in the commercial finite element software, especially in hydrodynamic codes. In the present study, a one-dimensional slide line contact model in LS-DYNA for modeling sliding of rebar along a string of concrete nodes is creatively used to model the bond slip between concrete and steel bars in RC structures. In order to model the bond slip accurately, a new approach to define the parameters of the one-dimensional slide line model from common pullout test data is proposed. Reliability and accuracy of the proposed approach and the one-dimensional slide line in modelling the bond slip between concrete and steel bar are demonstrated through comparison of numerical results and experimental data. A case study is then carried out to investigate the bond slip effect on numerical analysis of blast-induced responses of a RC column. Parametric studies are also conducted to investigate the effect of bond shear modulus, maximum elastic slip strain, and damage curve exponential coefficient on blast-induced response of RC columns. Finally, recommendations are given for modelling the bond slip in numerical analysis of blast-induced responses of RC columns.

• Coupled systems mechanics
• /
• 제9권2호
• /
• pp.163-182
• /
• 2020

Coupled thermo-mechanical analysis of reinforced concrete slab at elevated temperatures from a fire accounting for nonlinear thermal parameters is carried out. The main focus of the paper is put on a one-way continuous reinforced concrete slab exposed to fire from the single (bottom) side as the most typical working condition under fire loading. Although contemporary techniques alongside the fire protection measures are in constant development, in most cases it is not possible to avoid the material deterioration particularly nearby the exposed surface from a fire. Thereby the structural fire resistance of reinforced concrete slabs is mostly influenced by a relative distance between reinforcement and the exposed surface. A parametric study with variable concrete cover ranging from 15 mm to 35 mm is performed. As the first part of a one-way coupled thermo-mechanical analysis, transient nonlinear heat transfer analysis is performed by applying the net heat flux on the exposed surface. The solution of proposed heat analysis is obtained at certain time steps of interest by α-method using the explicit Euler time-integration scheme. Spatial discretization is done by the finite element method using a 1D 2-noded truss element with the temperature nodal values as unknowns. The obtained results in terms of temperature field inside the element are compared with available numerical and experimental results. A high level of agreement can be observed, implying the proposed model capable of describing the temperature field during a fire. Accompanying thermal analysis, mechanical analysis is performed in two ways. Firstly, using the guidelines given in Eurocode 2 - Part 1-2 resulting in the fire resistance rating for the aforementioned concrete cover values. The second way is a fully numerical coupled analysis carried out in general-purpose finite element software DIANA FEA. Both approaches indicate structural fire behavior similar to those observed in large-scale fire tests.

• 의학교육논단
• /
• 제19권3호
• /
• pp.134-137
• /
• 2017

The main points of issue with the former premedical curriculum of Seoul National University College of Medicine (SNUCM) were the absence of educational objectives, decline in student motivation caused by uniform education, students' lack of a sense of belonging, and lack of humanistic education. In accordance with these issues, there were five aspects considered for the improvement of the premedical curriculum: reform based on the newly established educational objectives that corresponds with the 6-year medical school curriculum as a whole, expansion of elective courses and the development of personalized curriculum for the improvement of students' learning motives, expansion of social sciences and humanities curriculum for the development of students' capabilities as good doctors, active participation of medical professors in premedical education, and expansion of informal education and the student support program. According to the assessment done after the implementation of the reformed curriculum, premedical students were gratified with its establishment and management of multifarious liberal arts and major subjects. In preparation of the more rigorous entrance quota of the premedical school at SNUCM, there is ongoing reform of required major subjects and establishment of new subjects in the premedical curriculum in pursuit of unity with the 6-year medical curriculum. Moreover, there is ongoing development of an e-portfolio system for the association of premedical and medical education, integration of formal and informal curriculum, and reinforcement of student observation and formative evaluation. Further discussion on the assessment and betterment of premedical curriculum is needed.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.125-130
• /
• 2008

The main components of the KSTAR helium refrigeration system (HRS) can be classified into the warm compression system (WCS) and the cryogenic devices according to the operating temperature levels. The WCS itself consists of the compressor station (C/S) and the oil removal system (ORS). The process helium is compressed from 1 bar to 22 bar maximum in the C/S and downstream, the ORS removes the oil mixed in the helium to less than 10 ppbw as per the operation criteria of the cryogenic devices of the KSTAR HRS. After the installation, the pre-commissioning and commissioning activities were started on July, 2007. Before the start-up of the C/S, vibration measurement and the skid reinforcement jobs were performed for stable operation of the C/S. The results of the WCS performance tests met the requirements of the KSTAR HRS but satisfied the vibration level criteria only at the compressors' full load condition.

• Structural Engineering and Mechanics
• /
• 제33권4호
• /
• pp.503-527
• /
• 2009

This paper presents experimental results on the behaviour and ultimate load of fifteen pipes and six roof panels made of ferrocement. Additional results from three roof panels, carried out by others, are also compared with this research results. OPC cement, natural sand and galvanised iron wire mesh were used for the construction of 20 mm thick specimens. The pipe length was 2 m and roof panel length was 2.1 m. The main variables studied were the number of wire mesh layers which were 1, 2, 3, 4 and 6 layers, the inner pipe diameter which were 105, 210 and 315 mm, cross sectional shape of the panel which were channel and box sections and the depth of the edge beam which were 95 mm and 50 mm. All specimens were simply supported and tested for pure bending with test span of 600 mm at mid-span. Tests revealed that increasing the number of wire mesh layers increases the flexural strength and stiffness. Increasing the pipe diameter or depth of edge beam of the panel increases the cracking and ultimate moments. The change in the pipe diameter led to larger effect on ultimate moment than the effect of change in the number of wire mesh layers. The box section showed behaviour and strength similar to that of the channel with same depth and number of wire mesh layers.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 지반조사위원회 봄 학술세미나
• /
• pp.47-60
• /
• 1998

본 고에서는 지반 조건의 불균질성 및 이방성에 기인하는 사전 지반 조사의 한계성, 혹은 충분치 못한 사전 지반 조사에 의해 터널 시공 중 발생되었던 터널 사고 사례들을 검토, 분석하고 지반 조사의 터럴 설계 및 시공에서의 활용에 대하여 고찰하였다. 본문에서는 암석(intact rock) 자체는 양호할지라도 암반 내에 존재하는 불연속 면들의 발달 상태 등 지질공학적 요인에 의하여 암반이 취약해지는 경우, 지반 내에 발달하는 불연속면의 사전 인지와 이에 대한 대책 공법 수립의 필요성, 충분하지 못한 사전 지반 조사에 의해 터널 상부에 존재하는 충적층을 사전에 예측하지 못하여 발생된 사고 사례들과 시공 중 지반 조사(막장 관찰, 갱내 선진시추 조사 등) 결과가 터널의 시공에 적용된 예와 특수한 지반조건에서의 터널 변형 사례등을 검토하였다. 결론적으로 터널 시공에 있어서 대상 지반의 지질공학적 특성을 충분히 파악할 수 있는 적절한 지반 조사를 충실히 이행하면 지반 관련 사고를 미연에 방지할 수 있고 경제적인 시공이 될 수 있을 것으로 판단하였다.

• 콘크리트학회논문집
• /
• 제17권4호
• /
• pp.535-542
• /
• 2005

고강도 콘크리트를 사용한 철근콘크리트 건축물의 실현을 위해서는 배합, 양생방법 등의 기술개발과 고강도 콘크리트의 각종 물성에 대한 연구, 고강도 철근콘크리트 부재의 구조적 거동에 관한 기술적 연구 등을 토대로 고장력 철근을 사용한 고강도 철근콘크리트 구조물의 구조 설계법 개발이 선행되어야 한다. 본 연구는 고강도 콘크리트 부재의 내력 및 연성에 미치는 영향을 분석하여, 고강도 재료를 사용한 철근콘크리트 부재설계에 필요한 기초 자료를 제시하는데 목적이 있다 철근콘크리트 보$\cdot$기둥 외부 접합부의 전단성상을 파악하기 위하여 14개의 시험체를 제작하여, 반복가력과 한 방향 단조가력방법으로 접합부의 전단실험을 실시하였다. 판넬존의 전단보강근 구속력$(pjw{\cdot}fy)$이 약 4.6MPa 정도까지는 접합부의 전단보강근이 항복강도에 도달한 후 판넬존이 전단파괴 되었고, 이 범위에서 접합부의 전단극한강도 제안식은 다음과 같다. $jv_u=(2.935{\times}10-3\;{\rho}jw{\cdot}fy\;+\;0.365){\sqrt{f_{ck}}}$