• Journal of Information Technology Services
• /
• v.22 no.6
• /
• pp.87-102
• /
• 2023

Existing child car seats do not have a monitoring means for the driver or guardian to effectively recognize the status of whether the seat belt of car seat is fastened and whether the ISOFIX of the car seat is fastened to the inside device of the vehicle. In this paper, we propose a smart car seat system which can monitor in real time, whether the seat belt of a child seated in the car seat is fastened and whether the ISOFIX of the car seat is fastened. The proposed system has been developed with a prototype, in which a Hall sensor, magnet, Bluetooth, and display device are used to detect whether these are fastened and to display the detection results. The prototype system provides the detection results as texts and alarm signal to the display for driver or guardian' smartphone in the car in motion. With functional tests of the prototype system, it was confirmed that the detection functions are properly operated, and the detection results were transmitted to the display device and smartphone via Bluetooth within 0.5 seconds. It is expected that the development system can effectively prevent safety accidents of child car seats.

• Journal of Advanced Technology Convergence
• /
• v.2 no.4
• /
• pp.1-6
• /
• 2023

Research on power inductor surface UV printing equipment using cylindrical magnets can prevent damage to quality consumable materials (making plates, Squeegees) during printing and improve printing quality by applying technology to prevent product from flipping or standing up when fixing the product by making the magnetic formation of cylindrical magnets form up and down. The development of cylindrical magnets that changed the direction of magnetic force will stabilize the fixing method for metal products made by powder compression, increasing the production capacity for small products. Finally, by studying the power inductor surface UV printing device using cylindrical magnets, it can be differentiated from the spray and deeping methods that were being worked on, production will be greatly improved, and as a result, cost reduction and competitive production will be possible.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.77-84
• /
• 2024

This paper introduces a study on an electromagnet magnetic gear designed for gear ratio conversion. In comparison to magnetic gears using permanent magnets, this electromagnet magnetic gear exhibits lower torque density, highlighting the need for torque density improvement. To address this, the research focuses on enhancing torque density by examining the consistent orientation of each rotor's magnetization during gear ratio conversion and attaching permanent magnets accordingly. However, an issue arises due to the uneven magnetic flux density caused by the non-uniform attachment of permanent magnets, leading to an increase in torque ripple. Therefore, building upon previous studies aimed at reducing torque ripple in electromagnet magnetic gears, this research explores the optimal methods, such as pole piece bridges and fillet configurations, to mitigate torque ripple even during gear ratio conversion.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.38-45
• /
• 2024

Most previous works about magnetic effect on plasma emission were interested in emission enhancement which was useful to various fields of plasma application. On the contrary, the following work is interested in plasma dissipation rarely reported in prior researches and expected to help advance plasma-controlling technique. Nd:YAG laser (1064 nm, 6 ns) was focused on three kinds of metals (Al, Ti and STS) and air. The permanent magnetic field (0.4 T) of Nd₂Fe₁₄B magnet was provided passing throughout laser-induced plasma. The spectra of plasma in both the presence and absence of the magnetic field were observed with varying laser power and delay time of the spectrograph. In this work it was uniquely discovered that the plasma always dissipated easily in the presence of magnetic field irrespective of the laser power. With the O I(777.42 nm)-line shape function fitted to Lorentz profile, its half width at half maximum (HWHM) was evaluated to verify that the magnetic field increased the plasma density. It is concluded that magnetic field facilitates not only plasma emission enhancement but also plasma dissipation, increasing recombination rate which is proportional to plasma density.

• Korean Journal of Radiology
• /
• v.21 no.6
• /
• pp.684-694
• /
• 2020

Objective: The purpose was to review the diagnostic performance of the length of tumor capsular contact (LCC) on magnetic resonance imaging (MRI) for detecting prostate cancer extraprostatic extension (EPE). Materials and Methods: PubMed and EMBASE databases were searched up to March 24, 2019. We included diagnostic accuracy studies that evaluated LCC on MRI for EPE detection using radical prostatectomy specimen histopathology as the reference standard. Quality of studies was assessed using the Quality Assessment of Diagnostic Accuracy Studies-2 tool. Sensitivity and specificity were pooled and graphically presented using hierarchical summary receiver operating characteristic (HSROC) plots. Meta-regression and subgroup analyses were conducted to explore heterogeneity. Results: Thirteen articles with 2136 patients were included. Study quality was generally good. Summary sensitivity and specificity were 0.79 (95% confidence interval [CI] 0.73-0.83) and 0.67 (95% CI 0.60-0.74), respectively. Area under the HSROC was 0.81 (95% CI 0.77-0.84). Substantial heterogeneity was present among the included studies according to Cochran's Q-test (p < 0.01) and Higgins I² (62% and 86% for sensitivity and specificity, respectively). In terms of heterogeneity, measurement method (curvilinear vs. linear), prevalence of Gleason score ≥ 7, MRI readers' experience, and endorectal coils were significant factors (p ≤ 0.01), whereas method to determine the LCC threshold, cutoff value, magnet strength, and publication year were not (p = 0.14-0.93). Diagnostic test accuracy estimates were comparable across all assessed MRI sequences. Conclusion: Greater LCC on MRI is associated with a higher probability of prostate cancer EPE. Due to heterogeneity among the studies, further investigation is needed to establish the optimal cutoff value for each clinical setting.

• Journal of Korean Elementary Science Education
• /
• v.43 no.3
• /
• pp.385-401
• /
• 2024

This study presents a step-by-step analysis of the experiences and discussions of five elementary school teachers while developing the Augmented Reality (AR) science educational materials, using the Unity Physics Engine. In the preparation phase to develop the AR materials, the teachers explored the features of the AR technology and decided to create AR materials for experiments related to magnetic fields in the magnetism unit, based on discussions about the unit selection. In addition, they complained about difficulties arising out of the lack of background knowledge about the C# programming language in the preparation phase. During the material development stage, there were difficulties in operating the unfamiliar interface and other functions of the software. However, this was overcome through knowledge sharing and collaborative communication among the teachers. The final materials developed were marker-type AR materials to perform experimental activities by changing the position of the magnet and the compass markers. Based on the developed materials, the teachers discussed their smooth utilization during the classroom activities.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.4
• /
• pp.661-668
• /
• 2024

Based on the topology of the direct-drive permanent magnet synchronous wind power grid-connected system based on the power electronics full-power converter, the wind turbine model and the grid-side inverter model were studied, and the machine-side rectifier control based on current and speed double closed loops was designed. strategy, as well as a grid-side inverter control strategy based on current and voltage double closed loops, implementing a two-level back-to-back double closed-loop full control strategy. A system simulation model was built using Matlab/Simulink, and the operation of the unit was simulated when the wind speed changed step by step. The grid-connected current with the same phase and good sinusoidal nature of the grid voltage was output. The grid-connected system ran stably and efficiently. The simulation results The validity and rationality of the model, as well as the correctness and feasibility of the control strategy were verified.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.189-194
• /
• 2002

Microstructure and magnetic properties of Sm-Co sintered magnet were investigated with the variation of Zr content and their solution treatment and aging temperatures. The fraction of eutectic structure and the size of eutectic area decreased with increasing x value of cast Sm(C $O_{.688-x}$F $e_{.242}$C $u_{.07}$Z $r_{x}$)$_{7.404}$ alloys. On the other hand, x=0.022 ingot had finer dendritic structure compared to the other alloys. The sintered magnet of Sm(C $O_{.688-x}$F $e_{.242}$C $u_{.07}$Z $r_{x}$)$_{7.404}$ had well defined cell structure which is composed of cell boundary Sm $Co_{5}$ and cell interior S $m_2$Co/ssub 17/ phase. Cell boundary Sm $Co_{5}$ phase has 20nm thickness and its relative angle was 120$^{\circ}$ in x=0.018 and 0.022 alloys. Cell size was decreased with increasing Zr contents. But, x=0.026 alloy has diffuse cell boundary and irregular shape compared to x=0.022 and 0.018 alloys. Maximum value of coercive force and maximum energy Product were obtained from x=0.022 alloys. Optimum solution treatment temperature of Sm(C $O_{.688-x}$F $e_{.242}$C $u_{.07}$Z $r_{x}$)$_{7.404}$ alloy was 1170 $^{\circ}C$ and 1st aging temperature of two step aging process for higher coercivity was 850 $^{\circ}C$.

• Clinical and Experimental Pediatrics
• /
• v.51 no.10
• /
• pp.1096-1101
• /
• 2008

Purpose : Patients with chronic granulomatous disease (CGD) have genetic mutations in a component of the NADPH oxidase enzyme that is necessary for the generation of the superoxide anion. The profound defect in innate immunity is reflected by the patients susceptibility to catalase-positive bacteria and fungi. In addition, CGD patients display signs of persistent inflammation, which is not associated only with deficient superoxide anion production. The aim of this study was to elucidate the cytokine responses in CGD patients after $TNF-{\alpha}$ stimulation. Methods : Heparinized blood samples were collected from 8 CGD patients and 10 healthy volunteers. Monocytes ($1{\times}10^6cell/well$) isolated by the magnet cell isolation system were incubated with a constant amount of $TNF-{\alpha}$ (10 ng/mL) at $37^{\circ}C$ for 6 h. Incubated cells were harvested at 60-min intervals for IL-8 and IL-10 mRNA analysis, and the supernatant was collected at the same intervals to determine IL-8 and IL-10 expression. Monocytes from healthy volunteers were also incubated with antioxidants followed by $TNF-{\alpha}$ stimulation for IL-8 and IL-10 expression. Results : In CGD patients, a high expression of IL-8 together with a significantly higher IL-10 expression than in the healthy controls was seen after $TNF-{\alpha}$ stimulation. Moreover, normal monocytes treated with antioxidants exhibited increased IL-8 responses. Conclusion : The absence of phagocyte-derived reactive oxidants in CGD might be associated with a dysregulated production of pro- and antiinflammatory cytokines. Additional research related to reactive oxidants is needed to clarify the role of cytokines in CGD patients.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.483-488
• /
• 2007

Current feeder system (CFS) for Korea superconducting tokamak advanced research(KSTAR) project plays a role to interconnect magnet power supply (MPS) and superconducting (SC) magnets through the normal bus-bar at the room temperature(300 K) environment and the SC bus-line at the low temperature (4.5 K) environment. It is divided by two systems, i.e., toroidal field system which operates at 35 kA DC currents and poloidal field system wherein 20$\sim$26 kA pulsed currents are applied during 350 s transient time. Aside from the vacuum system of main cryostat, an independent vacuum system was constructed for the CFS in which a roughing system is consisted by a rotary and a mechanical booster pump and a high vacuum system is developed by four cryo-pumps with one dry pump as a backing pump. A self interlock and its control system, and a supervisory interlock and its control system are also established for the operational reliability as well. The entire CFS was completely tested including the reliability of local/supervisory control/interlock, helium gas leakage, vacuum pressure, and so on.