• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.260-267
• /
• 2016

Background: This study analyzes the differences in the annual averaged atmospheric dispersion factor and ground deposition factor produced using two classification methods of atmospheric stability, which are based on a vertical temperature difference and the standard deviation of horizontal wind direction fluctuation. Materials and Methods: Daedeok and Wolsong nuclear sites were chosen for an assessment, and the meteorological data at 10 m were applied to the evaluation of atmospheric stability. The XOQDOQ software program was used to calculate atmospheric dispersion factors and ground deposition factors. The calculated distances were chosen at 400 m, 800 m, 1,200 m, 1,600 m, 2,400 m, and 3,200 m away from the radioactive material release points. Results and Discussion: All of the atmospheric dispersion factors generated using the atmospheric stability based on the vertical temperature difference were shown to be higher than those from the standard deviation of horizontal wind direction fluctuation. On the other hand, the ground deposition factors were shown to be same regardless of the classification method, as they were based on the graph obtained from empirical data presented in the Nuclear Regulatory Commission's Regulatory Guide 1.111, which is unrelated to the atmospheric stability for the ground level release. Conclusion: These results are based on the meteorological data collected over the course of one year at the specified sites; however, the classification method of atmospheric stability using the vertical temperature difference is expected to be more conservative.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.4
• /
• pp.586-591
• /
• 2010

Chemokine and Growth Factor are major mediumtors of immuno-inflammatory pathway. The purpose of this study is to investigate whether productions of Chemokine and Growth Factor in lipopolysaccharide (LPS)-induced mouse macrophage RAW 264.7 cells are modulated by Gallic acid (GA), which is easily founded in tannin-containing natural materials such as red wine, green tea, grape juice, and Corni Fructus. Productions of Chemokine and Growth Factor were analyzed by High-throughput Multiplex Bead based Assay with Bio-plex Suspension Array System based on $xMAP^{(R)}$ (multi-analyte profiling beads) technology. At first, cell culture supernatant was obtained after treatment with LPS and GA for 24 hour. Then, the antibody-conjugated beads were added and incubated for 30 minutes. After incubation, detection antibody was added and incubated for 30 minutes. And Strepavidin-conjugated Phycoerythrin (SAPE) was added. After incubation for 30 minutes, the level of SAPE fluorescence was analyzed on Bio-plex Suspension Array System. Based on fluorescence intensity, concentrations of Chemokine and Growth Factor were determined. The results of the experiment are as follows. GA significantly inhibited the production of interferon-inducible protein (IP)-10, keratinocyte-derived chemokine(KC), and vascular endothelial growth factor (VEGF) in LPS-induced RAW 264.7 cells at the concentration of 25, 50, 100, 200 uM (p<0.05). GA significantly inhibited the production of monocyte chemoattractant protein-1(MCP-1) and macrophage-colony stimulating factor(M-CSF) in LPS-induced RAW 264.7 cells at the concentration of 50, 100, 200 uM (p<0.05). GA diminished the production of granulocyte macrophage-colony stimulating factor (GM-CSF) in LPS-induced RAW 264.7 cells. But GA did not show the inhibitory effect on the production of leukemia inhibitory factor (LIP) and macrophage inflammatory protein (MIP)-2 in LPS-induced RAW 264.7 cells. These results suggest that GA has the immuno-modulating activity related with its inhibitory effects on the production of IP-10, KC, MCP-1, VEGF, and M-CSF in LPS-induced macrophages.

• Research in Mathematical Education
• /
• v.13 no.1
• /
• pp.49-61
• /
• 2009

In this paper some attempts have been made: (a) To identify all the elementary minor concepts of the Highest Common Factor (H.C.F.) and the Lowest Common Multiple (L.C.M.), and (b) To find the sequential order of these elementary concepts. Total 385 elementary minor concepts have been identified and sequenced.

• Journal of Radiation Protection and Research
• /
• v.26 no.4
• /
• pp.399-408
• /
• 2001

The variation characteristics of radon concentration, equilibrium equivalent concentration and equilibrium factor in some houses and laboratory buildings have been studied. The variation of equilibrium factor and the unattached fraction of radon progeny with ventilation condition have been also estimated. The averages of radon concentration, equilibrium equivalent concentration and equilibrium factor were $30\;Bq\;m^{-3},\;19.6\;Bq\;m^{-3}$ and 0.65 in seven houses, while $55.0\;Bq\;m^{-3},\;31.9\;Bq\;m^{-3}$ and 0.58 in three laboratory buildings, respectively. The diurnal variation of radon concentration, equilibrium equivalent concentration and equilibrium factor in indoor showed a typical pattern that the radon concentration, equilibrium equivalent concentration and equilibrium factor increased at dawn and morning, while decreased at midday and evening. While the equilibrium factor rate deceased in the indoor environment which was well ventilated, the unattached traction of radon progeny increased. The equilibrium factor was in proportion to air pressure and humidity of indoor, whereas in Inverse proportion to temperature.

• Journal of the Korean Mathematical Society
• /
• v.32 no.2
• /
• pp.183-193
• /
• 1995

Let N be a $II_1$ factor and G be a finite group acting outerly on N. Then the crossed product algebra $M = N \rtimes G$ is also a $II_1$ factor and $N' \cap M = CI$, i.e. N is irreducible in M. Moreover, N is regular in M, in other words, M is generated by the normalizer $N_M (N)$.

• Archives of Pharmacal Research
• /
• v.27 no.7
• /
• pp.738-741
• /
• 2004

Three lignans isolated from the roots of A. koreanum (Araliaceae), namely eleutheroside E(1), tortoside A(2), and hemiariensin(4), were evaluated for their ability to inhibit NFAT transcription factor. Of these compounds, compound 4, possessing a diarylbutane skeleton, exhibited potent inhibitory activity against NFAT transcription factor (($IC_{50}$ ： 36.3${\pm}2.5{\mu}\textrm{M}$). However, the activities of 1 (($IC_{50}$：＞500 11M) and 2 (($IC_{50}$： 136.1 ${\pm}9.4\mu\textrm{M}$), which possess bisaryldioxabicy-clooctane skeletons, were lower. As the lignan derivatives of the same skeletons, hinokinin (5) and (-)-yatein (6) with diarylbutane skeletons and(＋)-syringaresinol (3) with a bisaryldioxabicy-clooctane skeleton were also studied for their inhibitory effects on NFAT transcription factor.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.3
• /
• pp.351-355
• /
• 2005

This study was performed to investigate the influences of resistant starch (HM: HI-MAIZE) and HM-D (HI-MAIZE DIET) fortified with D-factor (consisted of Psyliium husk, polydextrose and hydrocitric acid) on the glucose and bile acid absorption and production of short chain fatty acids (SCFA). HM-D absorbed more glucose and bile acid than did HM. The glucose transport of HM and HM-D against dialysis membrane showed 77% and 68% for 4h, respectively. After 24h, bile acid transport of HM and HM -D showed 65% and 62.3%, respectively. The HM and HM-D produced 217.8 mM and 264.0mM of SCFA, respectively. The production of butyric acid in HM-D (32.7mM) showed higher than that of HM (26.9mM). The addition of D-factor to HM increased the physiological function of dietary fiber through the glucose and bile acid absorption and production of SCFA.

• Journal of Ocean Engineering and Technology
• /
• v.8 no.2
• /
• pp.115-123
• /
• 1994

Under variable amplitude loading conditions, retardation or accelerated condition of fatigue crack growth occurs with every cycle, Because fatigue crack growth behavior varied depend on load time history. The modeling of stress amplitude with storm loading acted to ships and offshore structures applied this paper. The crack closure behavior examine by recording the variation in load-strain relationship. By taking process mentioned above, fatigue crack growth rate, crack length, stress intensity factor, and crack closure stress intensity factor were obtained from the stress cycles of each type of storm ; A(6m), B(7m), C(8m), D(9m), E(11m) and F(15m) which was wave height. It showed that the good agreement with between the experiment results and simulation of storm loads. So this estimated method of crack propagtion rate gives a good criterion for the safe design of vessels and marine structure.

• Journal of Information Technology Services
• /
• v.15 no.2
• /
• pp.125-155
• /
• 2016

By reclassifying and reinterpreting the factor variables that were used in precedent studies on company informatization by research theme and perspective on them success factor, the present study tried to examine how different the factor variables are in frequency of use and by period, and how importantly they were considered by research theme and perspective on its success factor, combining them with the studies done on mechanism point of view. The key findings of this study are as follows. First, it was found that the frequency of using mechanism variables, which are reclassified based on SER-M perspective, has gradually increased since 1990s. While the frequency of using resource factors sharply increased in 1990s, it decreased from 2000s. It indicates that more studies were conducted of mechanism factors other than resource factors from the early 2000s. Second, when looking at those variables reclassified by research them, it was found that such theme as decision maker, environment, and resource factors were more used than other research themes in the studies on the measuring factors of informatization. Mechanism factors turned out most used among overall research themes. In particular, they were more frequently used in studies related to the performance of informatization. This result evidences that mechanism-related variables are more importantly considered in the studies than other factors. This study produces a practical implication: what factors companies have to manage and secure intensively to attain successful informatization. In addition, this study helps companies seeking informatization understand and take advantage of SER-M factors on the basis of knowledge in the transitional process of the factor variables used in studies by period. It is expected that CIO can use the key findings of this study in monitoring the factors by the stage of informatization.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.4
• /
• pp.681-693
• /
• 1995

A new set of capillary tube selection charts for R-22 is proposed. The set of charts takes into account of the roughness effect on the mass flow rate. For this purpose, a set of numerical model is developed and a series of experiments is conducted to verify the numerical model. A numerical model is used to calculated the mass flow rate for several sets of tube diameter, length, inlet pressures and degree of subcooling. The outlet of the tube is controlled to be at critical condition. The experimental flow rate is compared with calculated values. The calculated values are consistently less than the experimental ones except for the flow rate range below 40kg/hr. The deviation is within 10---. Based on the nunmerical model and results of experiments, the set of capillary tube selection charts for R-22 is constructed. The set of charts consists of standard capillary tube chart(L=2030mm, d=1.63mm, ${\varepsilon}=2.5{\mu}m$), non -standard flow factor(${\phi}_1$) chart, and non-standard roughness factor(${\phi}_2$) chart. The mass flow rate, flow factor, and the roughness factor are defined respectively as; $\dot{m}={\phi}_1{\phi}_2\dot{m}_{standard}\\{\phi}_1=\frac{\dot{m}(L,\;d,\;\varepsilon_{standard})}{\dot{m}_{standard}(L_{standard},\;d_{standard},\;{\varepsilon}_{standard})}\\{\phi}_2=\frac{\dot{m}(L_{standard},\;d_{standard},\;{\varepsilon})}{\dot{m}_{standard}(L_{standard},\;d_{standard},\;{\varepsilon}_{standard})}$.