• Journal of Technologic Dentistry
• /
• v.34 no.3
• /
• pp.213-220
• /
• 2012

Purpose: The aim of this study was to determine the repeatability and reproducibility of two dental scanners. Methods: The master die and the stone replicas(Kavo, Germany) were digitized in touch-probe scanner(Incise, Renishaw, UK), white light scanner(Identica, Medit, Korea) to create 3-dimensional surface-models. The number of points in the point clouds from each reading were calculated and used as the CAD reference model(CRM). Discrepancies between the points in the 3-dimensional surface models and the corresponding CRM were measured by a matching-software(Power-Inspect R2, Delcam Plc, UK). The t-student test for one samples were used for statistical analysis. Results: The reproducibility of both scanner was within $3{\mu}m$, based on mean value. The mean value between measurements made directly on the touch probe scanner digital models and those made on the white light scanner digital models was $2.20-2.90{\mu}m$, and was statistically significant(P<0.05). Conclusion: With respect to adequate data acquisition, the reproducibility of dental scanner differs. Three-dimensional analysis can be applied to differential quality analysis of the manufacturing process as well as to evaluation of different analysis methods.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.975-977
• /
• 2012

Premium Seles Tool은 상품의 기능이나 특징, 가격, 디자인 등을 이미지나 동영상을 이용하여 알기 쉽게 설명하는 시스템으로 제품 카탈로그와 같은 성격을 지닌다. 그러나 종이 카탈로그와 전자카탈로그는 공간적 제약과 업데이트의 한계로 사용에 불편함이 따른다. 본 논문에서 설계한 MobileCRM PST는 사진이나 동영상을 애니메이션과 유저 인터액션을 통해 제품의 품질을 높일 수 있으며, 모바일의 특성인 이동성이 확보된다. 또한 새로운 컨텐츠 업데이트 시 서버와 모바일에서 컨텐츠를 관리함으로써 사용자는 최신 컨텐츠를 간편하게 받아 볼 수 있다.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.4
• /
• pp.719-727
• /
• 2017

The objective of this study was to investigate the effect of alcohol content in Makgeolli made with Chinese matrimony vine (M-CMV) on the sensory profile and consumer acceptability. The M-CMVs were prepared with 6, 7, 8, and 9% alcohol content. Descriptive analysis of M-CMV was performed with six trained panelists. Thirteen attributes were generated and their intensities were alcohol content dependent. The consumer acceptance test was conducted with 57 consumers. M-CMV samples with 7% alcohol had the highest acceptance rate (5.8) followed by 6% M-CMV (5.6). Commercial rice Makgeolli (CRM) had the lowest consumer acceptance. Consumers were divided into two groups by clustering analysis. The majority of consumers (n=38) preferred M-CMV and did not like the commercial sample. Only 19 consumers indicated high acceptance ratings for CRM. However, these consumers also preferred 6 and 7% M-CMV. Partial least-squares regression analysis revealed moderate attribute intensities were related to greater consumer acceptability. The optimal alcohol content for the greatest consumer acceptance predicted by linear regression was 6.7%.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.3
• /
• pp.245-251
• /
• 2018

PURPOSE. To evaluate the accuracy of a model made using the computer-aided design/computer-aided manufacture (CAD/CAM) milling method and 3D printing method and to confirm its applicability as a work model for dental prosthesis production. MATERIALS AND METHODS. First, a natural tooth model (ANA-4, Frasaco, Germany) was scanned using an oral scanner. The obtained scan data were then used as a CAD reference model (CRM), to produce a total of 10 models each, either using the milling method or the 3D printing method. The 20 models were then scanned using a desktop scanner and the CAD test model was formed. The accuracy of the two groups was compared using dedicated software to calculate the root mean square (RMS) value after superimposing CRM and CAD test model (CTM). RESULTS. The RMS value ($152{\pm}52{\mu}m$) of the model manufactured by the milling method was significantly higher than the RMS value ($52{\pm}9{\mu}m$) of the model produced by the 3D printing method. CONCLUSION. The accuracy of the 3D printing method is superior to that of the milling method, but at present, both methods are limited in their application as a work model for prosthesis manufacture.

• Mass Spectrometry Letters
• /
• v.3 no.2
• /
• pp.58-61
• /
• 2012

A method based on flow injection-isotope dilution-cold vapor-inductively coupled plasma mass spectrometry (FI-IDCV-ICP/MS) has been applied to determine trace level of mercury in fly ash. $^{200}Hg$ isotopic spike was added to 0.25 g of BCR176R fly ash and then decomposed by microwave digestion procedure with acid mixture A (8 mL $HNO_3$ + 2 mL HCl + 2 mL HF) and acid mixture B (8 mL $HNO_3$ + 2 mL $HClO_4$ + 2 mL HF) for applying IDMS. Mercury cold vapor was generated by using reductant solution of 0.2% (w/w) $NaBH_4$ and 0.05% (w/w) NaOH. The measurements of n($^{200}Hg$)/n($^{202}Hg$) isotope ratio was made using a quadrupole ICP/MS system. The accuracy in this method was verified by the analysis of certified reference material (CRM) of fly ash (BCR 176R). The indicative value of Hg in BCR 176R fly ash was $1.60{\pm}0.23$ mg/kg (k = 2). The determined values of Hg in BCR 176R fly ash by the method of FI-CV-ID-ICP/MS described in this paper were $1.60{\pm}0.24$ mg/kg (k = 3.18) and the analysis results were in well agreement with the indicative value within the range of uncertainty.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.1
• /
• pp.9-15
• /
• 2012

BACKGROUND: A preliminary investigation of the radon ($^{222}Rn$) concentration has been conducted, employing solid-state nuclear-track detectors (SSNTD) and a continuous radon monitor (CRM), for fourteen randomly selected agricultural greenhouses in Jeju Island, where the underground-air was used for air conditioning and $CO_2$ supplement. METHODS AND RESULTS: The SSNTD was used to measure the average radon concentration for three months and the CRM was used for an instantaneous measurement. In order to obtain the radon concentration of a greenhouse, the SSNTDs were placed at a number of evenly distributed points inside the greenhouse and the mean of the measured values was taken. In addition, in order to assess the radon concentration of the underground-air itself, measurement was also made at the borehole of the underground-air in each agricultural facility, employing both the SSNTD and CRM. It is found that the radon concentration of the greenhouses ranges higher than those not using the underground-air and the average of Korean dwellings. While the radon concentration of most agricultural facilities is still lower than the reference level (1,000 Bq/$m^3$) recommended by the International Radiation Protection Committee (ICRP), three facilities at one site show higher concentrations than the reference level. The three-month-averaged radon concentration and the instantaneous radon concentration of the underground-air itself ranges 1,228- 5,259 and 3,322-17,900 Bq/$m^3$, respectively, and regional variation is more significant. CONCLUSION: From this results, radon concentration of the underground-air is assumed that it is associated with the geological characteristics and the boring depth of the region located of their.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.1
• /
• pp.39-47
• /
• 2014

Solar applications analysis and building energy performance depend on the quality of the solar resource data available. Unfortunately, most of the weather stations do not measure solar radiation data in Korea, as a reason many researchers have studied different solar radiation estimation models and suggested to apply them to various locations in Korea. In addition, they also studied the impact of hourly global solar radiation on energy performance of an office building by comparing the simulated building energy consumptions using four different weather files, one using measured, and three estimated solar radiation from different models, which are Cloud-cover Radiation Model (CRM), Zhang and Huang Model (ZHM), and Meteorological Radiation Model (MRM), and concluded that there was some impact on energy performance of the building due to the using different solar radiation models. However, the result cannot be applied to all other buildings since the simulated office building for that study only used limited building characteristics such as using fixed values of solar heat gain coefficient (SHGC) and window-to-wall ratio (WWR), which are significant parameters related to solar radiation that affect to the building energy consumptions. Therefore, there is a need to identify how the building energy consumption will be changed by varying these building parameters. In this study, the impact of one measured and three estimated global solar radiation on energy performance of the office building was conducted taking account of SHGC and WWR. As a result, it was identified that the impact of four different solar radiation data on energy performance of the office building was evident regardless SHGC and WWR changes, and concluded that the most suitable solar models was changed from the CRM/ZHM to the MRM as SHGC and WWR increases.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.376-383
• /
• 2019

In recent decades, China's economy has grown rapidly and two-dimensional bar code-based payments services have been activated. This is a model that will be introduced by developing countries that lack mobile payment infrastructure, and countries that are looking to leap into cashless societies are also drawing attention. Along with this, the existing CRM market is expanding around the mobile device called m-CRM, and research is active on the importance of collective use for online advertising and two-dimensional bar code-based payments services. Therefore, through this study, we have explored the concepts and status of online advertising and customer relationship management which using the two-dimensional bar code-based system, and designed and implemented the method and mobile application system to effectively disseminate transactional advertising information at the point of sale or at the point of share. We also presented an application approach to look at the direction of two-dimensional bar code-based ads contents sharing system and its development.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.336-341
• /
• 2001

무선인터넷 환경하에서 기업의 무선상거래의 활성화를 위해서는 제품 및 서비스에 대한 홍보가 무선인터넷을 통해서 이루어져야 한다. 즉, 해당 상품에 대한 정보를 느낄만한 사람들에게 필요한 시점에 무선 광고를 전달하기 위해서는 고도로 개인화된 마케팅에 대한 연구가 필요하다. 본 논문에서는 무선인터넷이라는 매체가 가지는 특성을 기반으로 개별화마케팅을 수행하기 위해 개인정보 취득 및 처리단계에서 데이터마이닝 기법인 연관관계와 군집모델 탐사를 통하여 고객의 관심사를 분석하고, 이를 토대로 마케팅을 수행하는 시스템을 설계하였으며, 이후 프로모션 정책수립과 마케팅 수행방안들을 제안한다. 이는 기업의 모바일 환경에서의 고객관계관리(mCRM)를 위한 솔루션 개발의 기반기술이 될 것이다.

• Proceedings of the PSK Conference
• /
• 2000.04a
• /
• pp.98.1-98.1
• /
• 2000