• 한국관개배수논문집
• /
• 제5권1호
• /
• pp.47-62
• /
• 1998

The purpose of this study is to evaluate storm runoff models of Imjin river basin(8,117.5$km^2$) for the provision of radar rainfall situation. Two lumped models, Storage Function Model(SFM) and HEC-1 model which are now in use broadly and prov

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.257-264
• /
• 1997

Seismic responses of the Hualien large scale seismic test model on a layered soil site are estimated for two recorded earthquakes and the analysis results are then compared and evaluated with the recorded responses. The method adopted for the analysis is based on substructuring method using a lumped parameter model in both the frequency and time domain. the study results indicate that the proposed method can reasonably estimate the earthquake responses of a soil-structure interaction system for engineering purposes.

• 한국추진공학회지
• /
• 제17권6호
• /
• pp.81-88
• /
• 2013

Taylor-Maccoll 유동관계식과 준 1차원 모델을 적용한 구성품 기반의 이중램제트 추진기관 모델 개발에 대해 기술하였다. 이중램제트 흡입구는 Taylor Maccoll 유동관계식을 적용하여 콘 각도 $25^{\circ}$ 형상을 갖는 흡입구에 대해 아음속 및 초음속 흡입구 모델을 구현하였으며 예 연소가스를 초음속 연소기로 전달하는 기능의 가스발생기는 Lumped 모델을 적용하여 모델을 구현하였고 요구되는 노즐목 크기에 대해 기술하였다. 초음속 연소기의 경우 준 1차원 모델을 적용하여 위치에 따른 마하수 변화, 온도변화 및 압력변화 등을 제시하였다. 또한 금번 모델을 이용하여 당량비 및 압력회복율을 고려한 연료량 조절모델에 따른 추력과 비추력을 계산하여 그 결과를 제시하였다.

• 신재생에너지
• /
• 제18권4호
• /
• pp.12-21
• /
• 2022

The pyrolysis characteristics of high-density polyethylene (HDPE), low-density polyethylene (LDPE), and polypropylene (PP) were analyzed numerically using a 1D plug flow reactor (PFR) model. A lumped kinetic model was selected to simplify the pyrolysis products as wax, oil, and gas. The simulation was performed in the 400-600℃ range, and the plastic pyrolysis and product generation characteristics with respect to time were compared at various temperatures. It was found that plastic pyrolysis accelerates rapidly as the temperature rises. The amounts of the pyrolysis products wax and oil increase and then decrease with time, whereas the amount of gas produced increases continuously. In LDPE pyrolysis, the pyrolysis time was longer than that observed for other plastics at a specified temperature, and the amount of wax generated was the greatest. The maximum mass fraction of oil was obtained in the order of HDPE, PP, and LDPE at a specified temperature, and it decreased with temperature. Although the 1D model adopted in this study has a limitation in that it does not include material transport and heat transfer phenomena, the qualitative results presented herein could provide base data regarding various types of plastic pyrolysis to predict the product characteristics. These results can in turn be used when designing pyrolysis reactors.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.542-546
• /
• 2008

In this study, we developed a whole cardiovascular system model combined with a Laplace heart based on the numerical cardiac cell model and a detailed arterial network structure. The present model incorporates the Laplace heart model and pulmonary model using the lumped parameter model with the distributed arterial system model. The Laplace heart plays a role of the pump consisted of the atrium and ventricle. We applied a cellular contraction model modulated by calcium concentration and action potential in the single cell. The numerical arterial model is based upon a numerical solution of the one-dimensional momentum equations and continuity equation of flow and vessel wall motion in a geometrically accurate branching network of the arterial system including energy losses at bifurcations. For validation of the present method, the computed pressure waves are compared with the existing experimental observations. Using the cell-system-arterial network combined model, the pathophysiological events from cells to arterial network are delineated.

• 대한전자공학회논문지SD
• /
• 제41권4호
• /
• pp.15-22
• /
• 2004

이 논문은 PCB의 PDN(Power Distribution Network) 시스템을 고려한 채널 분석을 나타내었다. 설계자가 원하는 PDN 시스템을 설계하기 위하여, 전체 주파수 범위의 PDN이 요구하는 임피던스를 얻는 유용한 설계방법을 제안하였다. 제안된 방법은 주파수 영역과 관계된 계층적 배치 접관방식과 보트와 decoupling 커패시터 사이의 current 흐름의 간섭을 고려한 path-based equivalent 회로를 기본으로 하였다. 비록 빠르고 쉬운 계산을 위한 lumped model일지라도, 실험 결과는 제안된 모델이 numerical 분석처럼 거의 정확함을 보였다. PDN 시스텐의 분석은 패키지 인덕턴스가 파워 노이즈, 데이터 채널을 통한 신호 이동에 영향을 받는다는 것을 보여주고 있으나, 보드 PDN 또한 정확한 채널 신호를 위해 무시할 수 없다는 것을 보여준다. 따라서 설계자는 반드시 초고속 디지털 시스템의 첫 스팩 설계로부터 보드, 패키지, 칩 등을 동시에 디자인을 해야 한다.

• 에너지공학
• /
• 제6권1호
• /
• pp.41-51
• /
• 1997

단일 드럼형 보일러를 갖는 발전 플랜트의 동특성 해석을 위한 프로세스 모델이 모듈 개념을 기반으로 묘사된다. 현재의 프로세스 모델은 플랜트 전체 구성 요소 및 고부하에서의 부하 변동을 포함하며 lumped parameter에 의해 물리적으로 접근된다. 플랜트 성분을 의미하는 모듈은 필수적으로 성분 특성을 잘 묘사하며 사용자에 의해 결정된 배열에 대해 압력점 방식에 의해 상호 연결된다. 프로세스 모델의 발전 플랜트 시스템에 대한 적용성 여부를 조사하기 위해 100MW발전 플랜트의 실제 운전 LOG-IC을 갖는 제어 시스템에 연결하여 3MW/min 부하 변동율로 75MW에서 95MW, 95MW에서 75MW조건에 대해 조사된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.243-243
• /
• 2015

Low-flow simulation and forecasting is one of the emerging issues in hydrology due to the increasing demand of water in dry periods. Even though low-flow simulation and forecasting remains a difficult issue for hydrologists better simulation and earlier prediction of low flows are crucial for efficient water management. The UN has never stated that South Korea is in a water shortage. However, a recent study by MOLIT indicates that Korea will probably lack water by 4.3 billion m3 in 2020 due to several factors, including land cover and climate change impacts. The two main situations that generate low-flow events are an extended dry period (summer low-flow) and an extended period of low temperature (winter low-flow). This situation demands the hydrologists to concentrate more on low-flow hydrology. Korea's annual average precipitation is about 127.6 billion m3 where runoff into rivers and losses accounts 57% and 43% respectively and from 57% runoff discharge to the ocean is accounts 31% and total water use is about 26%. So, saving 6% of the runoff will solve the water shortage problem mentioned above. The main objective of this study is to present the hydrological modelling approach for low-flow simulation and forecasting using a model that have a capacity to represent the real hydrological behavior of the catchment and to address the water management of summer as well as winter low-flow. Two lumped hydrological models (GR4J and CAT) will be applied to calibrate and simulate the streamflow. The models will be applied to Seolmacheon catchment using daily streamflow data at Jeonjeokbigyo station, and the Nash-Sutcliffe efficiencies will be calculated to check the model performance. The expected result will be summarized in a different ways so as to provide decision makers with the probabilistic forecasts and the associated risks of low flows. Finally, the results will be presented and the capacity of the models to provide useful information for efficient water management practice will be discussed.

• 한국농공학회지
• /
• 제33권4호
• /
• pp.61-72
• /
• 1991

A lumped deterministic model(DAWAST model) was developed to predict the daily streamflow. Since the streamflow is dominantly determined by the soil water storage in the watershed, the model takes the soil water accounting procedures which are based on three linear reservoirs representing the surface, unsaturated, and saturated soil layers. The variation of soil water storage in the unsaturated zone is traced from the soil water balance on a daily basis. DAWAST model consists of 5 parameters for water balance and 3 parameters for routing. A optimization technique of unconstrained nonlinear Simplex method was applied for the determination of the optimal parameters for water balance. Model verification was carried out to the 7 hydrologic watersheds with areas of 5.89-7,126km$^2$ and the results were generally satisfactory. The daily streamflow can be arbitrarily simulated with the input data of daily rainfall and pan evaporation by the DAWAST model at the station where the observed streamflow data of short periods are available to calibrate the model parameters.

• 한국소음진동공학회논문집
• /
• 제17권8호
• /
• pp.757-765
• /
• 2007

Enhanced PSPICE circuit model for vented-box loudspeaker system with lumped parameters was proposed to more accurately simulate real vented-box loudspeaker system. Frequency dependent parameters were used to model voice coil inductor. Acoustic pressure response curves and electrical impedance curves were simulated and investigated by PSPICE circuit model according to circuit parameters' variations. Finally, it was used to identify faults detection in woofers manufactured by unskilled persons.