• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.942-949
• /
• 2006

A lumped model is proposed to predict liquid ejection characteristics of a thermally driven inkjet print head. The model is based on a two-dimensional heat conduction equation, an empirical pressure-temperature equation and a nonlinear hydraulic flow-pressure equation. It has been simulated through the construction of an equivalent R-C circuit, and subsequently analyzed using SIMULINK and a circuit simulation tool, PLECS. Using the model, heating and cooling characteristics of the head are predicted to be in agreement with the IR temperature measurements. The effects of the head geometry on the drop ejection are also analyzed using the nonlinear hydraulic model. The present model can be used as a design tool for a better design of thermal inkjet print heads.

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.101-107
• /
• 2007

Jettability analysis using one-dimensional(1D) lumped parameter model has been investigated to design the industrial inkjet head with proper drop velocity and drop volume. By simplifying the inkjet head system into an equivalent electrical circuit, lumped model has been developed. Performance of the lumped model is verified by the comparison between measured results of droplet velocity and ejection volume and predicted value. Also, the jetting performance of an inkjet head is characterized by varying the design parameter and driving condition. As a result, simulation results shows good agreement with the experimentally measured value. The developed lumped model enables to easily understand the effect of dimension change and predict the jetting performance.

• 대한전자공학회논문지SD
• /
• 제43권12호
• /
• pp.23-32
• /
• 2006

다층 고속 디지털 보드에 대한 빠르고 정확한 전압 버스 설계 방법은 정확하고 정밀한 고속 보드에 전원 공급망 설계 방법을 위해 고안되었다. FAPUD는 PBEC(Path Based Equivalent Circuit)모델과 망 합성 방법의 두 중요 알고리즘을 기반으로 구성된다. PBEC 모델 기반의 회로 레벨의 2차원 전원 분배 망의 전기적 값으로부터 lumped 1차원 회로 모델로 간단한 산술 표현들을 활용한다 제안된 PBEC 기반인 회로 단계 설계는 제안한 지역 접근법을 이용해 수행된다. 이 회로 단계 설계는 온칩 디커플링 커패시터의 크기, 오프칩 디커플링 커패시터의 위치와 크기, 패키지 전압 버스의 유효한 인덕턴스를 직접 결정하고 계산한다. 설계 출력에 따라 모든 디커플링 커패시터가 포한된 lumped 회로 모델과 전압 버스의 레이아웃은 FAPUD 방법을 이용한 후 얻을 수 있다. 미세조정 과정에서, I/O Switching에 의해 덧붙여진 Simultaneous Switching Noise(SSN)를 고려한 보드 재 최적화가 수행될 수 있다 이는 전원 공급 잡음에 I/O 동작 효과가 lumped 회로 모델을 가지고 전 동작 주파수 범위에 대해 추산될 수 있기 때문이다. 게다가 만약 설계에 조정이 필요하거나 교체해야 한다면, FAPUD 방법은 다른 전면 설계변경 없이 디커플링 커패시터들을 대체하여 설계를 수정하는 것이 가능하다. 마지막으로 FAPUD 방법은 전형적인 PEEC 기본설계 방법과 비교해 정확하고 FAPUD 방법의 설계 시간은 전형적인 PEEC 기본 설계 방법의 시간보다 10배가 빠르다.

• 한국항공우주학회지
• /
• 제45권8호
• /
• pp.697-703
• /
• 2017

펄스형 플라즈마 추력기의 성능해석을 위해 Teflon의 승화와 이온화 모델링을 수행하였다. PPT 작동 시 발생하는 방전 전휴의 변화를 예측하기 위해 일차원 lumped circuit model을 적용하였으며 Mickeal Keidar가 제시한 테플론-플라즈마 온도에 따른 테플론 승화 모델을 적용하였다. Saha 방정식을 이용하여 테플론 구성 원소인 탄소와 불소분자의 이온화를 예측하였다. 프로그램 검증을 위해 선행실험 결과와 비교하여 유사함을 확인하였으며 PPT 작동 전압에 따른 전류 변화정도를 고찰하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.31-35
• /
• 2019

The lumped-parameter circuit model for a no- insulation (NI) high temperature superconductor (HTS) magnet has been well understood after many experimental and analytic studies over a decade. It successfully explains the non-linear charging behaviors of NI magnets. Yet, recently, multiple groups reported that the post-quench electromechanical behaviors of an NI HTS magnet may not be well explained by the lumped circuit model. The characteristic resistance of an NI magnet is one of the key parameters to characterize the so-called "NI behaviors" of an NI magnet and recently a few groups reported a potential that the characteristic resistance of an NI magnet may substantially vary during a quench. This paper deals with this issue, the increment of contact resistance of the no-insulation (NI) REBCO magnet during a quench and its impact on the post-quench behaviors. A 7 T 78 mm NI REBCO magnet that was previously built by the MIT Francis Bitter Magnet Laboratory was chosen for our simulation to investigate the increment of contact resistance to better duplicate the post-quench coil voltages in the simulation. The simulation results showed that using the contact resistance value measured in the liquid nitrogen test, the magnitude of the current through the coil must be much greater than the critical current. This indicates that the value of the contact resistance should increase sharply after the quench occurs, depending on the lumped circuit model.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권2호
• /
• pp.50-53
• /
• 2008

A design approach using a one-dimensional (1D) lumped model was studied and applied to an industrial inkjet printing head design for micro patterning on printed circuit boards. For an accurate analysis, a three-dimensional piezoelectric-driven actuator model was analyzed and its jetting characteristics were applied to 1Danalysis model. The performance of the 1D lumped model was verified by comparing measured and simulated results. The developed 1D model helped to optimize the design and configuration of the inkjet head and could be implemented in the design of multi-nozzle inkjet printing heads to improve the jetting frequency and minimize crosstalk.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.141-150
• /
• 2007

This paper presents a lumped model to predict crosstalk characteristics of thermally driven inkjet print heads. Using the lumped R-C model, heating characteristics of the head are predicted to be in agreement with IR temperature measurements. The inter-channel crosstalk is simulated using the lumped R-L network. The values of viscous flow resistance, R and flow inertance, L of connecting channels are adjusted to accord with the 3-D numerical simulation results of three adjacent jets. The crosstalk behaviors of a back shooter head as well as a top shooter head have been investigated. Predictions of the proposed lumped model on the meniscus oscillations are consistent with numerical simulation results. Comparison of the lumped model with experimental results identifies that abnormal two-drop ejection phenomena are related to the increased meniscus oscillations because of the more severe crosstalk effects at higher printing speeds. The degree of crosstalk has been quantified using cross-correlations between neighboring channels and a critical channel dimension for acceptable crosstalk has been proposed and validated with the numerical simulations. Our model can be used as a design tool for a better design of thermal inkjet print heads to minimize crosstalk effects.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권3호
• /
• pp.38-42
• /
• 2023

The evaluation of no-insulation (NI) high-temperature superconducting (HTS) typically uses the lumped equivalent circuit (LEC) model. Constant parameters in the NI HTS LEC model accurately predict voltage and central magnetic field at currents below the critical current. However, it is difficult to find constant circuit parameters that simultaneously satisfy the measured voltage and magnetic field under overcurrent conditions. Recent research highlights changes in contact resistance during transient conditions, which may impact power loss estimation in NI HTS coils. Therefore, we confirm the influence of contact resistance changes on loss calculation in the transient state for NI HTS coil. To achieve this, we introduce a measurement data analysis method based on the LEC model and compare it with the LEC model using constant circuit parameters.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.115-118
• /
• 2002

This paper presents the design method and performance characteristics of a chip-type quadrature hybrid using LTCC-MLC technology. The design method for a chip-type quadrature hybrid is based on lumped element equivalent circuit of quarter-wave transformer. The chip-type quadrature hybrid was miniaturized to a greater extent using multilayer structure and lumped element. The proposed design method can also reduce the undesirable parasitic effects of the chip-type quadrature hybrid. The proposed chip-type quadrature hybrid was designed and fabricated using the proposed design method and the equivalent circuit model of a quarter-wave transformer. Fabrication and measurement of designed chip-type quadrature hybrid show much smaller size than a conventional distributed quadrature hybrid and a good agreement with simulated results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.101-102
• /
• 2011

The attraction force is an important parameter for permanent-magnet(PM) linear machines. This paper aims to analysis lumped magnetic circuit model of a magnetic levitation system. It accounts for the fringing effect and leakage flux which may greatly affect the accuracy of the analytical model for the optimal lumped magnetic circuit model. consequentially it will be able to apply to prospective permanent-magnet(PM) linear machines for accurate analysis.