Fig. 1. A lumped-parameter circuit model consisting of n-DPs [18].
TABLE I REBCO CONDUCTOR PARAMETERS [25].
Fig. 3. Voltage profile of the 7 T 78 mm magnet quench experiment interpolated with the Hermite method.
Fig. 4. Characteristic resistance of each module.
Fig. 5. Simulated azimuthal current & operating current profile with characteristic resistance measured at 77 K.
Fig. 6. Simulated radial current profile with characteristic resistance measured at 77 K.
Fig. 7. Simulated azimuthal current & operating current profile with increased characteristic resistance ramps to 0.1 mΩ.
Fig. 2. Schematic of 7 T 78 mm magnet configuration [16].
TABLE II 7T 78MM MAGNET PARAMETERS [16].
References
- S. Hahn, D. K. Park, J. Bascunan, and Y. Iwasa, "HTS pancake coils without turn-to-turn insulation," IEEE Transactions on Applied Superconductivity, vol. 21, no. 3, pp. 1592-1595, 2011. https://doi.org/10.1109/TASC.2010.2093492
- Y. Yanagisawa, K. Sato, K. Yanagisawa, H. Nakagome, X. Jin, M. Takahashi, and H. Maeda, "Basic mechanism of self-healing from thermal runaway for uninsulated REBCO pancake coils," Physica C, vol. 499, pp. 40-44, 2014. https://doi.org/10.1016/j.physc.2014.02.002
- Y. Wang, H. Song, D. Xu, Z. Li, Z. Jin, and Z. Hong, "An equivalent circuit grid model for no-insulation HTS pancake coils," Superconductor Science and Technology, vol. 28, no. 4, p. 045017, 2015. https://doi.org/10.1088/0953-2048/28/4/045017
- T. Wang, S. Noguchi, X. Wang, I. Arakawa, K. Minami, K. Monma, A. Ishiyama, S. Hahn, and Y. Iwasa, "Analyses of transient behaviors of no-insulation REBCO pancake coils during sudden discharging and overcurrent," IEEE Transactions on Applied Superconductivity, vol. 25, no. 3, p. 4603409, 2015.
- W. D. Markiewicz, J. J. Jaroszynski, D. V. Abraimov, R. E. Joyner, and A. Khan, "Quench analysis of pancake wound REBCO coils with low resistance between turns," Superconductor Science and Technology, vol. 29, no. 2, p. 025001, 2015. https://doi.org/10.1088/0953-2048/29/2/025001
- J. Kim, S. Yoon, K. Cheon, K. H. Shin, S. Hahn, D. L. Kim, S. Lee, H. Lee, and S.-H. Moon, "Effect of resistive metal cladding of HTS tape on the characteristic of no-insulation coil," IEEE Transactions on Applied Superconductivity, vol. 26, no. 4, p. 4601906, 2016.
- D. G. Yang, S. Hahn, Y. Kim, K. L. Kim, J.-B. Song, J. Bascunan, H. Lee, and Y. Iwasa, "Characteristic resistance of no-insulation and partial-insulation coils with nonuniform current distribution," IEEE Transactions on Applied Superconductivity, vol. 24, no. 3, p. 7700405, 2014.
- Y. J. Hwang, J. Y. Jang, S. Song, J. M. Kim, and S. Lee, "Feasibility study of the impregnation of a no-insulation HTS coil using an electrically conductive epoxy," IEEE Transactions on Applied Superconductivity, vol. 27, no. 4, p. 4603405, 2017.
- J. Y. Jang, S. Yoon, S. Hahn, Y. J. Hwang, J. Kim, K. H. Shin, K. Cheon, K. Kim, S. In, Y.-J. Hong et al., "Design, construction and 13 K conduction-cooled operation of a 3 T 100 mm stainless steel cladding all- REBCO magnet," Superconductor Science and Technology, vol. 30, no. 10, p. 105012, 2017. https://doi.org/10.1088/1361-6668/aa8354
- Y. Li, D. Hu, J. Zhang, W. Wu, Z. Li, K. Ryu, Z. Hong, and Z. Jin, "Feasibility study of the impregnation of a no-insulation hts coil using solder," IEEE Transactions on Applied Superconductivity, vol. 28, no. 1, p. 5200505, 2018.
- Y. Wang, W. K. Chan, and J. Schwartz, "Self-protection mechanisms in no-insulation (RE) Ba2 Cu3 Ox high temperature superconductor pancake coils," Superconductor Science and Technology, vol. 29, no. 4, p. 045007, 2016. https://doi.org/10.1088/0953-2048/29/4/045007
- H. Song and Y. Wang, "Simulations of nonuniform behaviors of multiple No-insulation (RE) Ba2 Cu3 O7-x HTS pancake coils during charging and discharging," IEEE Transactions on Applied Superconductivity, vol. 26, no. 4, p. 4700105, 2016.
- S. Noguchi, K. Kim, and S. Hahn, "Simulation on electrical field generation by hall effect in no-insulation REBCO pancake coils," IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, p. 4901805, 2018.
- Y. G. Park, H. C. Jo, J. Lee, H. M. Kim, Y. Do Chung, Y. Chu, K. Y. Yoon, T. K. Ko, and Y. S. Yoon, "Test and analysis of electromagnetic and mechanical properties of hts coil during quench state," IEEE Transactions on Applied Superconductivity, vol. 26, no. 3, p. 4602104, 2016.
- A. Ikeda, T. Oki, T. Wang, A. Ishiyama, K. Monma, S. Noguchi, T. Watanabe, and S. Nagaya, "Transient behaviors of no-insulation REBCO pancake coil during local normal-state transition," IEEE Transactions on Applied Superconductivity, vol. 26, no. 4, p. 4600204, 2016.
- J.-B. Song, S. Hahn, T. Lecrevisse, J. Voccio, J. Bascunan, and Y. Iwasa, "Over-current quench test and self-protecting behavior of a 7T/78 mm multi-width no-insulation REBCO magnet at 4.2 K," Superconductor Science and Technology, vol. 28, no. 11, p. 114001, 2015. https://doi.org/10.1088/0953-2048/28/11/114001
- J. Lu, J. Levitan, D. McRae, and R. P. Walsh, "Contact resistance between two REBCO tapes: the effects of cyclic loading and surface coating," Superconductor Science and Technology, vol. 31, no. 8, p. 085006, 2018. https://doi.org/10.1088/1361-6668/aacd2d
- K. R. Bhattarai, K. Kim, S. Kim, S. Lee, and S. Hahn, "Quench analysis of a multiwidth no-insulation 7-T 78-mm REBCO magnet," IEEE Transactions on Applied Superconductivity, vol. 27, no. 4, p. 4603505, 2017.
- J. Y. Coulter, J. Hanisch, J. O. Willis, L. Civale, and W. K. Pierce, "Position and magnetic field angle dependent for long-length coated conductors," IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 3394-3397, 2007. https://doi.org/10.1109/TASC.2007.898944
- J. Y. Coulter, T. G. Holesinger, J. A. Kennison, J. O. Willis, and M. W. Rupich, "Nondestructive investigation of position dependent variations in multi-meter coated conductors," IEEE Transactions on Applied Superconductivity, vol. 19, no. 3, pp. 3609-3613, 2009. https://doi.org/10.1109/TASC.2009.2019252
- V. Selvamanickam, Y. Yao, Y. Chen, T. Shi, Y. Liu, N. Khatri, J. Liu, C. Lei, E. Galstyan, and G. Majkic, "The low-temperature, highmagnetic-field critical current characteristics of zr-added (gd, y) ba2cu3ox superconducting tapes," Superconductor Science and Technology, vol. 25, no. 12, p. 125013, 2012. https://doi.org/10.1088/0953-2048/25/12/125013
- S. Fujita, H. Satoh, M. Daibo, Y. Iijima, M. Itoh, H. Oguro, S. Awaji, and K. Watanabe, "Characteristics of rebco coated conductors for 25t cryogen-free superconducting magnet," IEEE Transactions on Applied Superconductivity, vol. 25, no. 3, p. 8400304, 2015.
- S. Hahn, K. Radcliff, K. Kim, S. Kim, X. Hu, K. Kim, D. V. Abraimov, and J. Jaroszynski, "'Defect-irrelevant' behavior of a noinsulation pancake coil wound with REBCO tapes containing multiple defects," Superconductor Science and Technology, vol. 29, no. 10, p. 105017, 2016. https://doi.org/10.1088/0953-2048/29/10/105017
- L. Rossi, X. Hu, F. Kametani, D. Abraimov, A. Polyanskii, J. Jaroszyn- ski, and D. Larbalestier, "Sample and length-dependent variability of 77 and 4.2 k properties in nominally identical RE123 coated conductors," Superconductor Science and Technology, vol. 29, no. 5, p. 054006, 2016. https://doi.org/10.1088/0953-2048/29/5/054006
- S. Hahn, J. Song, Y. Kim, T. Lecrevisse, Y. Chu, J. Voccio, J. Bascunan, and Y. Iwasa, "Construction and test of 7-T/68-mm cold-bore multiwidth no-insulation GdBCO magnet," IEEE Transactions on Applied Superconductivity, vol. 25, no. 3, p. 4600405, 2015.
- S. Hahn, Y. Kim, D. Keun Park, K. Kim, J. P. Voccio, J. Bascunan, and Y. Iwasa, "No-insulation multi-width winding technique for high temperature superconducting magnet," Applied physics letters, vol. 103, no. 17, p. 173511, 2013. https://doi.org/10.1063/1.4826217
- S. Yoon, J. Kim, K. Cheon, H. Lee, S. Hahn, and S.-H. Moon, "26 T 35 mm all-GdBa2Cu3O7-x multi-width no-insulation superconducting magnet," Superconductor Science and Technology, vol. 29, no. 4, p. 04LT04, 2016. https://doi.org/10.1088/0953-2048/29/4/04LT04
- X. Wang, S. Hahn, Y. Kim, J. Bascunan, J. Voccio, H. Lee, and Y. Iwasa, "Turn-to-turn contact characteristics for an equivalent circuit model of no-insulation ReBCO pancake coil," Superconductor Science and Technology, vol. 26, no. 3, p. 035012, 2013. https://doi.org/10.1088/0953-2048/26/3/035012
- K. Hollig and J. Koch, "Geometric hermite interpolation with maximal order and smoothness," Computer Aided Geometric Design, vol. 13, no. 8, pp. 681-695, 1996. https://doi.org/10.1016/0167-8396(96)00004-0