References
- Lee, S.-W., Kim, H.-C., Kuk, K. and Oh, Y.-S., 2001, 'A Monolithic Inkjet Print Head: DomeJet,' Proceedings of IEEE, MEMS 2001, The 14th IEEE International Conference on Micro Electro Mechanical Systems, pp. 515-518 https://doi.org/10.1109/MEMSYS.2001.906592
- Asai, A., Hara, T. and Endo, J., 1987, 'One- Dimensional Model of Bubble Growth and Liquid Flow in Bubble Jet Printers,' Japanese Journal of Applied Physics, Vol. 26, pp. 1794-1801 https://doi.org/10.1143/JJAP.26.1794
- Chen, P. H., Chen, W. C. and Chang, S. H., 1997, 'Bubble Growth and Ink Ejection Process of a Thermal Ink Jet Printhead, ' Int. J. Mech. Sci., Vol. 39, pp. 683-695 https://doi.org/10.1016/S0020-7403(96)00067-7
- Chen, P. H., Chen, W. C., Ding, P. P. and Chang, S. H., 1998, 'Droplet Formation of a Thermal Sideshooter Ink Jet Printhead,' Int. J. Heat and Fluid Flow, Vol. 19, pp. 382-390 https://doi.org/10.1016/S0142-727X(98)10007-3
- Rembe, C., Wiesche, S. and Hofer, E. P., 2000, 'Thermal Ink Jet Dynamics: Modeling, Simulation, and Testing,' Microelectronics Reliability, Vol. 40, pp. 525-532 https://doi.org/10.1016/S0026-2714(99)00233-4
- Mudd, C., 1999, 'Evaluation of Phase Transition Errors in Heat Capacity Calorimeters Using SPICE Simulated RC Models,' J. Biochem. Biophys. Methods, Vol. 39, pp. 7-38 https://doi.org/10.1016/S0165-022X(98)00045-1
- http://www.plexim.com
- Beasley. J. D., 1977, 'Model for Fluid Ejection and Refill in an Impulse Drive Jet,' Photographic Science and Engineering, Vol. 21, pp. 78-82
- Kyser, E. L., Collins, L. F. and Herbert, N., 1981, 'Design of Impulse Ink Jet,' Journal of Applied Photographic Engineering, Vol. 7, No.3, pp. 73-79
- White, F. M., 1974, Viscous Fluid Flow, McGraw-Hill, New York
- Asai, A., 1991, 'Bubble Dynamics in Boiling Under High Heat Flux Pulse Heating,' Journal of Heat Transfer, Vol. 113, pp. 973-979 https://doi.org/10.1115/1.2911230
- Runge, W., 1992, 'Nucleation in Thermal Ink-Jet Printers,' IS&T's 8th International Congress on Advances in Non-Impact Printing Technologies, pp.299-302
- Avedisian, C. T., Osborne, W. S., McLeod, F. D. and Curley, C. M., 1991, 'Measuring Bubble Nucleation Temperature on the Surface of a Rapidly Heated Thermal Ink-Jet Heater Immersed in a Pool of Water,' Proc. R. Soc. London A, Vol. 455, pp. 3875-3899 https://doi.org/10.1098/rspa.1999.0481
- Chemical Engineers' Handbook 5th Edition, 1988, The Society of Chemical Engineers Japan, Maruzen