• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.598-599
• /
• 2017

In motor application, High efficiency is important. So Design engineer select small gate resistor for lower switching. But There is side effect with small gate resistor. It makes large dv/dt and system request large EMI filter. It makes price increase. This paper introduce about gate drive IC which have solution both of lower loss and EMI issue.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.45-49
• /
• 2002

This paper presents the basic characteristics of a forced resonant type EMI dipole antennas for frequencies below 80 MHz in which two reactance elements are used for the impedance matching at the fined point. The input impedance of the short dipole less than half-wavelength is controlled by the properly determined loading position and the value of loading reactance. The numerical results show that the small-sized EMI dipole antenna with loller antenna factors for frequencies below 80 MHz can be realized by the reactance loading. In case tole proposed center driven forced resonant type EMI dipole antenna with 0.3 λ length is loaded from the center, the input impedance is matched at feed line with 50 $\Omega$, and hence the antenna has lower factors in the frequency range of 30 to 80 MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.421-430
• /
• 2003

In this paper, we propose a method to consider SAR(Specific Absorption Rate) at beginning stage of handsets development. First, simulation was carried out with changing folding angle from 150$^{\circ}$to 142$^{\circ}$. Simulation results show that SAR value is decreased with decreasing the folding angle. When folding angle is 142$^{\circ}$, error between simulation and measurement results is about 3.95 %. Second, we made some experiments with EMI (Electromagnetic Interference) paint, and its results show that different pattern of EMI paint have different SAR values. After removing EMI paint at the lower part of antenna feeding point, we got the decrease efficiency of 15.46 % for SAR value. When we applied zigzag painting pattern, we got the highest SAR decrease efficiency.

• English Language & Literature Teaching
• /
• v.18 no.3
• /
• pp.25-51
• /
• 2012

The study explores the way professors working in a private university in Korea perceive the recent English-medium instruction (EMI) frenzy in Korean higher education (HE) and the way they respond to its manifestation at their institution. Working within a qualitative research paradigm (Merriam, 2009), I gathered data primarily via one-time semi-structured interviews with ten participants who have offered or are offering EMI at the time of data collection and used a qualitative data analysis method. The findings illustrate that the professors view external factors residing outside individual universities, such as the college rankings and the university evaluation parameters, as the principal drive behind the current EMI boom in Korean tertiary education. Acknowledging the importance of strengthening the international competitive edge of Korean HE in the global era, the professors perceive the EMI policy positively expecting it to be beneficial for both students and institutions. They, however, problematize the blind acceptance of EMI policy and externally forced EMI expansion movement in Korean HE, which they believe will lower the standard of the academic experience of students. Experiencing first-hand the inadequate manifestation of the EMI policy at their university, the professors claim that a systematic long-term implementation plan and context-suitable approaches should be taken at both the national and institutional level for successful future EMI implementation and expansion efforts.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.602-609
• /
• 2015

In this paper, a zero current transition (ZCT) double-ended flyback converter is proposed. All of the switching elements act under soft switching conditions and the voltage stress of the main switches is limited to the input voltage due to the innate behavior of the double-ended flyback converter. Providing soft switching conditions and clamping the voltage stress improves the efficiency and electromagnetic compatibility (EMC). The Proposed converter is analyzed in detail and its operating modes are discussed in detail. Experimental results are presented to verify the theoretical predictions. Moreover, the conducted electromagnetic emissions of the proposed ZCT double-ended flyback converter are measured to show another merit of the proposed converter in addition to providing soft switching conditions. The measured electromagnetic interference (EMI) of the proposed converter demonstrates that its EMI is lower than the conventional double-ended flyback converter. Furthermore, two simple and cost effective EMI reduction methods are applied to satisfy the EMC standard.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.3
• /
• pp.32-43
• /
• 2014

This paper presents the intra capacitance modeling according to the winding method, section bobbin and coil structure for hybrid choke coil capable of the EMI attenuation of broad bands from lower frequency bands to higher frequency bands and high frequency type common-mode choke coil capable of the EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. In case of high frequency type CM choke coil, it can be explained the parasitic capacitance of A type and section bobbin type winding methods among them is much smaller than the other. The first resonant frequency of the proposed CM choke coil tends to increase as the parasitic capacitance becomes small and its impedance characteristics also show improved performance as the first resonant frequency increases. In case of hybrid choke coil using rectangular copper wire, it has investigated its parasitic capacitance compared to CM choke coil of conventional toroidal type becomes small. Also it has confirmed through the experiment results that CE margin and RE margin in frequency bands 0.5MHz to 5MHz and 30MHz to 200MHz are respectively 10dB and 15dB greater than that of conventional type in case of one stage EMI filter structure adopting hybrid choke coil compared to two stage EMI Filter structure using two of each CM choke coil used in the lower and higher frequency bands or two of CM choke coil used in only the lower frequency bands. In the future, the hybrid choke coil and CM choke coil of high frequency type show it can be practically used in not only LED/LCD-TV SMPS but also several applications such as LED Lighting, Laptop Adapter, Server Power Supply and so on.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.455-462
• /
• 2015

H-field EMI measurements have been performed for the single-ended, the differential, and the pseudo-differential signaling on a 11" FR4 microstrip line. The pseudo-differential signaling reduces EMI by more than 10 dB compared to the single-ended signaling if the delay mismatch is lower than 5% of a period for a 3 GHz clock signal. Empirical H-field equations for both differential and single-ended signaling showed fair agreements with measurements.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.542-545
• /
• 2002

This paper deals with the optimization inverter design and minimization Conduced EMI noise by customizing IPM(Intelligent Power Module). Generally, In case of IPM, we realized that the trade-off relation between switching loss and spike voltage. Higher gate resistor causes tile lower spike voltage and the higher turn-off switching loss. But we know that the life cycle of inverter and the susceptibility of noise, so we optimized the gate resistor. Proposed method is that optimized the gate resistor suitable for the inverter and motor. The simulation and experimental results show that the spike voltage and Conduced EMI noise can be reduced without the additional circuit.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.500-502
• /
• 2006

Recently, nuclear power plants have been testing for application of wireless communication system to improve communication easier. Improving the availability of communication in NPPs, plant operation ability and good communication have contributed to the lower reactior trip frequency. In these regards, the possibilities of improvement in communication systems are reviewed detail. Especially, we reviewed the wire communication system, facility effect, regulation and new technologies. In this paper, we described the application of wireless in NPPs by studying EMI/RFI, EMC effect.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.4
• /
• pp.192-196
• /
• 2002

Ionic liquids based on l-ethyl-3-methylimidazolium cation $(EMI^+)$ and inorganic or organic anions containing fluorine atoms were applied to electrolyte materials for double-layer capacitors. The double-layer capacitors composed of a pair of activated carbon electrodes and an ionic liquid selected from $EMIBF_4,\; EMINbF_6,\;EMITaF_6,\;EMICF_3SO_3,\;EMI(CF_3SO_2)_2N,\;and\;EMI(C_2F_5SO_2)_2N$ showed inferior low-temperature characteristics to those of a conventional nonaqueous electrolyte based on propylene carbonate (PC) solvent. On the other hand, the capacitor using $EMIF{\cdot}2.3HF$ showed excellent low-temperature characteristics due to its high conductivity at low temperatures, however, it had a lower working voltage $(\~2V)$ than the conventional nonaqueous counterpart $(\~3V)$.