• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권8호
• /
• pp.399-403
• /
• 2006

An accurate constant output voltage provided by the analog memory cell may be used by the low power oscillator to generate an accurate low frequency output signal. This accurate low frequency output signal may be used to maintain long-term timing accuracy in host devices during sleep modes of operation when an external crystal is not available to provide a clock signal. Further, incorporation of the analog memory cell in the low power oscillator is fully implementable in a 0.35um Samsung standard CMOS process. Therefore, the analog memory cell incorporated into the low power oscillator avoids the previous problems in a oscillator by providing a temperature-stable, low power consumption, size-efficient method for generating an accurate reference clock signal that can be used to support long sleep mode operation.

• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.157-163
• /
• 2014

This paper proposes a two-stage step-down buck and a tapped-inductor boost cascaded converter for high efficiency photovoltaic micro-inverter applications. The proposed inverter is a new structure to inject a rectified sinusoidal current into a low-frequency switching inverter for single-phase grid with unity power factor. To build a rectified-waveform of the output current. the converter employs both of a high efficiency step-up and a step-down converter in cascade. In step-down mode, tapped inductor(TI) boost converter stops and the buck converter operates alone. In boost mode, the TI converter operates with the halt of buck operation. The converter provides a rectified current to low frequency inverter, then the inverter converts the current into a unity power-factor sinusoidal waveform. By applying a TI, the converter can decrease the turn-on ratios of the main switch in TI boost converter even with an extreme step-up operation. The performance validation of the proposed design is confirmed by an experimental results of a 120W hardware prototype.

• 전자공학회논문지D
• /
• 제36D권5호
• /
• pp.1-10
• /
• 1999

저전력으로 동작하고 24리드 SSOP에 실장할 수 있는 2.4 GHz 송수신 MMIC를 1.0㎛ 이온주입 MESFET공정으로 제작하였다. 이MMIC는 송신모드일 때 2.44 GHz에서 3.9 mA의 전류를 소모하였으며 이때 변환이득은 7.5㏈, 출력 IP3는 -3.5 ㏈, 잡음지수는 3.9㏈이었다. 수신모드일 때는 소모전류 2.0mA로 전압검출도 6.5 mV/μW를 나타내었다. 그동안 발표된 다른 MMIC가 우수한 성능을 가지고 있음을 알 수 있었으며 2.4 GHz의 ISM 대역에서 간단한 방식의 무선랜, WLL, RFID 등으로 응용될 것이 기대된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.433-439
• /
• 2000

Lots of semi-active control devices have been developed in recent years because they have the best features of passive and active system. Especially, controllable magneto-rheological(MR) fluid devices have received significant attention in these area of research. The MR fluid is the material that reversibly changes from a free-flowing, linear viscous fluid to a semisolid with a controllable yield strength in milliseconds when exposed to a magnetic field. If the magnetic field is induced by moving a permanent magnet instead of applying current to a solenoid, it is possible to design a MR damper consuming low power because the power consumption is reduced at steady state. This paper proposes valve mode MR damper using permanent magnetic circuit that has wide range of operation with low power consumption and small size. To design a MR damper that has a large maximum dissipating torque and a low damping coefficient, a design parameter is adopted. The magnetic circuit, material of choke and choke type are selected experimentally with the design parameter. The behaviors of the damper are examined and torque tracking control using PID feedback controller is performed for step, ramp and sinusoidal trajectories.

• 한국전기전자재료학회논문지
• /
• 제17권2호
• /
• pp.207-211
• /
• 2004

We have performed computer simulation to obtain a globa1 optimization of power consumption and viewing angle characteristic of reflective twisted nematic (R-TN) mode liquid crystal display (LCD) with sin81e polarizer and λ/4 plate. Our studies shout that with increasing the twist angle, a steepness of reflectance-voltage curve increase, operation voltages decreases, the region where contrast ratio (CR) greater than 10 increases but the reflectance of the white state starts to decrease at above the twist angle of 75$^{\circ}$. Above the twist angle of 90$^{\circ}$, the R-TN mode LCD shows the most favorable combination of low consumption and good viewing angle characteristic.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.871-876
• /
• 2011

In this paper, a voltage-controlled frequency tunable current-mode integrator and a 3rd-order current-mode Chebyshev filter in 1.8V-$0.18{\mu}m$ CMOS is realized for software radio applications in system-on-chips. This filter is used for reconstruction purposes between a current-steering DAC and a current-mode mixer. Power consumption of the designed filter can be reduced by using a current-mode small size integrator. And also, cutoff frequency of this filter is variable between 1.2MHz and 10.1MHz, the power consumption is 2.85mW. And the voltage bias compensated circuit is used to control the voltage variation.in the designed filter.

• 전력전자학회논문지
• /
• 제8권1호
• /
• pp.64-69
• /
• 2003

전류모드 제어시 전류루프에는 표본화 효과에 의해 저주파 모델로는 예측하기 어려운 고주파 성분이 존재한다. 본 논문에서는 영전압 스위칭 하프 브리지 컨버터의 정상상태에서의 출력전압 관계식을 구한다 또 이를 바탕으로 전류모드로 제어할 때 전류루프에 존재하는 표본화 효과를 고려하여 저주파 소신호 모델이 예측하기 어려운 고주파 성분의 특성을 표본화 이득을 통하여 더욱 정확히 예측할 수 있는 방법을 제시한다.

• 동력기계공학회지
• /
• 제19권4호
• /
• pp.89-96
• /
• 2015

This paper investigates some strategies to overcome the chattering problem of the conventional sliding mode observer (SMO) and to improve the rotor position estimation performance for full range sensorless control of a PMSM. An adaptive observer gain based on the Lyapunov's stability criterion and a cascade low pass filter with advanced phase delay compensation were proposed to reduce the chattering problem and to strengthen the filtering capability of the SMO. Several cases studies through experiments were carried out to confirm conventional SMO's problems and effectiveness of the proposed strategies. The experimental results show that the proposed method gives precise estimation on speed and rotor position when the motor rotates on 2% of its rated speed.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권4호
• /
• pp.214-218
• /
• 2002

In this paper, the effectiveness of three different control algorithms are thoroughly investigated via simulation and a proposed efficiency evaluation method of experimentation. Both the steady state and transient characteristics of each control algorithm along with its measured efficiency are analyzed. Finally, a novel two-mode maximum power point tracking (MPPT) control algorithm combining the constant voltage control and the incremental conduction (IncCond) methods is proposed to improve the efficiency of the 3KW PV power generation system at different insolation conditions. Experimental results show that the proposed two-mode MPPT control provides excellent performance at less than 30% insolation intensity, covering the whole insolation area without additional hardware circuitry.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.446-454
• /
• 2022

This study proposes a carrier-based pulse width modulation (PWM) method for leakage current reduction and neutral point (NP) current control in a three-phase three-level converter, which is a carrier-based PWM version of the previously proposed low-frequency common mode voltage PWM. Three groups of space vectors with the same common mode voltage are used. When the averaged NP current needs to be positive or negative, the specific groups are employed to produce low-frequency common mode voltages. The validity of the proposed PWM method is verified through experiments.