• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.525-526
• /
• 2006

Ethernet Passive Optical Networks (EPON) are an emerging access network technology that provide a low-cost method of deploying optical access lines between a central office (CO) and a customer site. This paper shows that subscriber unit manages traffic data between a central office (CO) and a customer site in economic solution.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.61-69
• /
• 2020

As post-harvest processes of onions are carried by a 20 kg-net package which results in high-cost and low-efficiency, especially, the insufficient drying and physical damage of onions after harvesting leads to a huge second loss in storage, we had developed a low-cost, high-efficiency post-harvest bulk handling machinery system by collecting onions on a farm using ton-bags, drying with forced air circulation, and sorting/packaging. The post-harvest bulk handling machinery system consisted of 6 devices, and this study designed an automatic feed hopper with a feeding rate control device, an inclined belt conveyor with a two-step chute, and an automatic pallet unloading device for feeding onions into the sorting/packing line. This study also analyzed the performance and control of the total system. The device had 1-ton handling capacity, but the operational condition was set to increase the capacity. The three-step filling method of pallet by the velocity control of the inclined belt conveyor was applied in the post-harvest bulk handling machinery system for the prevention of physical damage. If one worker was set to operate the total system, the time required to complete one palletized load was approximately 5 minutes and 5 seconds. The calculated daily handling capacity was approximately 94 tons, when the daily actual working time was 8 hours. When the developed system was applied to the managerial size of 2,000 ton, the processing cost per ton of the system was decreased by 19.5%, compared with the existing 20 kg-net package-based handling. The developed post-harvest bulk handling machinery system would be a good substitute for the rapid decline and aging of rural labor.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.155-162
• /
• 2008

The quality of the fruits is measured by a lot of parameters. The grader of the fruits to measure the size of them is using the rotation drum method. Therefore when we classify the size of the fruits, they will be damaged. Also the optical grader used for estimating the degree of the saccharinity will incur high cost for it. In the proposed system, to select the characteristics of the fruits, three cameras are used. Because the information such as the volume and the degree of the maturity is used to classify the fruits, the degree of the saccharinity can't be estimated itself, but the information such as the color and the damage of the fruits can be estimated. Therefore, because we don't need the digital image with high resolution, we can develop the grader system of the fruit with low cost. To evaluate the performance of the proposed system, we compared it with the sight estimation and then we classified the sample. The result shows the accuracy of 96.7%.

• Journal of Convergence for Information Technology
• /
• v.11 no.4
• /
• pp.230-241
• /
• 2021

This study has attempted to provide an important understanding about the information asymmetry in markets through empirical analysis on how the disclosure of low quality can increase demand even in the short run. More specifically, this study has extended the previous findings from the related literature by considering the effect of information search cost and providing empirical evidences about the effect of voluntary disclosure of low quality, using an experimental method with purchase scenarios. The results from our analysis show that reduced perceived risk have an important effect on sharing negative information, while the effect of information search cost is minimal. We also explain the circumstances whereby the information disclosure of a seller with low-quality product can enhance not only the seller's profitability but also customers' welfare by increasing the market demand and the demand for the seller claiming high quality.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.124-128
• /
• 2001

We apply for the first time a low cost and loss wafer level packaging technology for RF-MEMS device. The proposed structure was simulated by finite element method (FEM) tool (HFSS of Ansoft). S-parameter measured of the package shows the return loss (S11) of 20dB and the insertion loss (S21) of 0.05dB.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.9
• /
• pp.1584-1588
• /
• 2007

This paper proposed the voltage compulsion method that used chopper for light dimming control of fluorescent lamp. During the dimming period, electronic ballasts have the bad characteristics such as low power factor, high THD(Total Harmonic Distortion) and etc. The proposed dimmer improves power factor, THD of electronic ballast and has benefit such as low cost, simple build up.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.410-412
• /
• 1997

A new method to improve the THD of the three phase rectifiers is introduced in this paper. The main features of this paper are low cost, high efficiency and simplicity. The proposed 3 bidirectional switches and their operation are presented. A simulation and experiment results show its good action.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.70-77
• /
• 2002

Since our physical world cannot be modeled as rigid body, deformable object models are important. For real-time simulation of elastic object, it must be guaranteed by its exact solution and low-latency computational cost. In this paper, we describe the boundary integral equation formulation of linear elastic body and related boundary element method(BEM). The deformation of elastic body can be effectively solved with 1ow run-time computational costs, using precomputed Green Function and fast low-rank updates based on Capacitance Matrix Algorithm.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.135-139
• /
• 2003

Sensor networks consist of sensor nodes with small-size, low-cost, low-power, and multi-functions to sense, to process and to communicate. Minimizing power consumption of sensors is an important issue in sensor networks due to limited power in sensor networks. Clustering is an efficient way to reduce data flow in sensor networks and to maintain less routing information. In this paper, we propose a multi-hop clustering mechanism using global and local ID to reduce transmission power consumption and an efficient routing method for improved data fusion and transmission.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.6
• /
• pp.569-575
• /
• 2013

This paper proposes a method for PDR (Pedestrian Dead-Reckoning) using a low cost IMU. Generally, GPS has been widely used for localization of pedestrians. However, GPS is disabled in the indoor environment such as in buildings. To solve this problem, this research suggests the PDR scheme with an IMU attached to the pedestrian's waist. However, despite the fact many methods have been proposed to estimate the pedestrian's position, but their results are not sufficient. One of the most important factors to improve performance is, a new calibration method that has been proposed to obtain the reliable sensor data. In addition to this calibration, the PDR method is also proposed to detect steps, where estimation schemes of step length, attitude, and heading angles are developed. Peak and zero crossings are detected to count the steps from 3-axis acceleration values. For the estimation of step length, a nonlinear step model is adopted to take advantage of using one parameter. Complementary filter and zero angular velocity are utilized to estimate the attitude of the IMU module and to minimize the heading angle drift. To verify the effectiveness of this scheme, a real-time system is implemented and demonstrated. Experimental results show an accuracy of below 1% and below 3% in distance and position errors, respectively, which can be achievable using a high cost IMU.