• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.202-207
• /
• 2003

The purpose of this study was to investigate the effect of background noise on loudness magnitude estimation of Heavy-weight impact noise. Relationship between loudness magnitude estimation and estimation methods about floor impact noise had appeared low in apartment which receive much effect of background noise. Then, to need new estimation method abut effect of background noise. Masking effects by background noise is increased steadily, there is a continuous transition between an audible impact noise and one that is totally masked. Result 1 hat analyze interrelationship of phychoacoustical data and values through Zwicker Parameters, to Investigate that an estimation experiment about Annoyance need.

• Journal of Radiation Protection and Research
• /
• 제22권3호
• /
• pp.219-226
• /
• 1997

환경시료 및 Swipe시료에서 방출되는 감마선을 측정 분석하기 위하여 극저준위 백그라운드 감마선 측정시스템을 설치하였다. 본 측정시스템은 백그라운드를 저감하기 위해 극저방사능 물질로 구성된 수동적 차폐방법, 우주선 영향을 차단하기 위한 역동시 측정법, 그리고 공기중 방사성 핵종인 라돈가스를 시스템 내부에서 제거하는 방법 등을 적용하고 있다. 적용된 백그라운드 저감법에 대한 성능시험 결과, 실험실 조건의 백그라운드 준위가 관심 대상 에너지 영역($50\;keV{\sim}2\;MeV$)에서 $10^{-2}$ order 정도로 저감되었다. 그리고 미신고 핵활동을 탐지하기 위한 관심 대상 핵종의 감마선 에너지 영역에서 평가된 시스템의 최소검출하한(MDA)값은 환경시료 분석에 적합한 것으로 평가되었다. 그러나 저에너지 영역에서는 여전히 우주선에 의한 중성자 영향이 백그라운드 요인으로 작용하고 있는 것으로 분석되었다.

• 농촌계획
• /
• 제22권2호
• /
• pp.89-98
• /
• 2016

Due to the rapid economic development of Korea, the bridge have been built by government over the several years. Additionally, there are too many mountain and river and the bridge have been built in rural area. But bridge designers weren't considering the bridge landscape. And bridge was a negative factor in regional landscape. Because of this, this study surveyed the landscape preferences of rural bridge landscapes according to different bridge types. The results were summarized as follows: And this research include conducting a study on visual preference according to the bridge's type and background. And, the landscape of arch bridge in the river 1 is landscape of the highest preference. The the landscape of girder bridge in the river 2 is landscape of the lowest preference. In the river 1 and 2 landscape, high preference is observed in the arch bridge and low preference is noted in the girder bridge. In the mountain 1 and 2 landscape, high preference is observed in the cable-stayed bridge and low preference is noted in the girder bridge. In conclusion, the visual preference of bridge landscape depend on the background and bridge shape, the study said. Therefore, when bridge designer design the bridge, designer have to choose proper bridge shape according to the background. This research was conducted only in bridge landscape of rural area but the visual preference of bridge landscape can be changed according to the various background. And further research is needed to analyze visual preference of bridge landscape according to the various background.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1185-1188
• /
• 2007

The address discharge characteristics by the various scan-low and common-bias voltages are investigated based on measured address discharge time lags and $V_t$ close-curve analysis. The scan-low voltages are changed under the same voltage difference between the X and Y electrodes during an address period. As the voltage difference between the scan and address electrodes is increased during an address period, the address discharge time lag is shortened but the background luminance is increased. It is found that the improved address discharge characteristics is caused by the effect of the higher external applied voltage during an address period than the accumulated wall charges during a reset period and the high background luminance can be prevented by applying an address-bias voltage during a rising-ramp period and low reset voltage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권12호
• /
• pp.6043-6062
• /
• 2019

Low-rank matrix decomposition has shown its capability in many applications such as image in-painting, de-noising, background reconstruction and defect detection etc. In this paper, we consider the texture background of rail track images and the sparse foreground of the defects to construct a low-rank matrix decomposition model with block sparsity for defect inspection of rail tracks, which jointly minimizes the nuclear norm and the 2-1 norm. Similar to ADM, an alternative method is proposed in this study to solve the optimization problem. After image decomposition, the defect areas in the resulting low-rank image will form dark stripes that horizontally cross the entire image, indicating the preciselocations of the defects. Finally, a two-stage defect extraction method is proposed to locate the defect areas. The experimental results of the two datasets show that our algorithm achieved better performance compared with other methods.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권6호
• /
• pp.617-626
• /
• 2018

This study aims to provide the basic data helpful for the improvement of rights and interests of radiological technologists, by understanding the current working environment and if they get the proper reward through the analysis on the perception of appropriateness of current wage and job satisfaction of radiological technologists. Survey was conducted to evaluate the perception of satisfaction with job and wage system, work intensity, necessity of the radiological technologist limit system, and turnover in accordance. The appropriate starting salary was low in case of women and non-capital area, and when the age, academic background, career, and hospital size were lower. The appropriate wage was low in case of women and non-capital area, and when the academic background and hospital size were lower. The negative perception of the necessity to change the wage system was shown in university hospitals. Regarding the work intensity, in case of women and low career, and when the age, academic background, and hospital size were higher, the work intensity was perceived as high. When the academic degree and hospital size were lower, the positive perception of the radiological technologist limit was shown. The turnover intention was high in case of women, and when the age, academic background, career, and hospital size were lower. In order to increase the job satisfaction of radiological technologists, it would be necessary to the appropriate reward and the environment where they could concentrate on work.

• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.415-419
• /
• 2008

Detecting and correcting defects on LCD glasses early in the manufacturing process becomes important for panel makers to reduce the manufacturing costs and to improve productivity. Many attempts have been made and were successfully applied to detect and identify simple defects such as scratches, dents, and foreign objects on glasses. However, it is still difficult to robustly detect low-contrast defect region, called Mura or blemish area on glasses. Typically, these defect areas are roughly defined as relatively large, several millimeters of diameter, and relatively dark and/or bright region of low Signal-to-Noise Ratio (SNR) against background of low-frequency signal. The aim of this article is to present a robust algorithm to segment these blemish defects. Early 90's, a highly robust estimator, known as the Model-Fitting (MF) estimator was developed by X. Zhuang et. al. and have been successfully used in many computer vision application. Compared to the conventional Least-Square (LS) estimator the MF estimator can successfully estimate model parameters from a dataset of contaminated Gaussian mixture. Such a noise model is defined as a regular white Gaussian noise model with probability $1-\varepsilon$ plus an outlier process with probability $varepsilon$. In the sense of robust estimation, the blemish defect in images can be considered as being a group of outliers in the process of estimating image background model parameters. The algorithm developed in this paper uses a modified MF estimator to robustly estimate the background model and as a by-product to segment the blemish defects, the outliers.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.10-16
• /
• 2022

As an important part of virtual production, In-camera VFX is the process of shooting actual objects and virtual three-dimensional backgrounds in real-time through computer graphics technology and display technology, and obtaining the final film. In the In-camera VFX process, there are currently only two types of medium used to undertake background imaging, LED wall and chroma key screen. Among them, the In-camera VFX based on LED wall realizes background imaging through LED display technology. Although the imaging quality is guaranteed, the high cost of LED wall increases the cost of virtual production. The In-camera VFX based on chroma key screen, the background imaging is realized by real-time keying technology. Although the price is low, due to the limitation of real-time keying technology and lighting conditions, the usability of the final picture is not high. The short-throw projection technology can compress the projection distance to within 1 meter and get a relatively large picture, which solves the problem of traditional projection technology that must leaving a certain space between screen and the projector, and its price is relatively cheap compared to the LED wall. Therefore, in the In-camera VFX process, short-throw projection technology can be tried to project backgrounds. This paper will analyze the principle of short-throw projection technology and the existing In-camera VFX solutions, and through the comparison experiments, propose a low-cost solution that uses short-throw projectors to project virtual backgrounds and realize the In-camera VFX process.

• 대한가정학회지
• /
• 제35권2호
• /
• pp.159-172
• /
• 1997

The purpose of this study was to investigate visual evaluation according to various methods of motif presentation and the value contrast between the motif and background. The instruments developed for this purpose were two sets of stimuli and a response scale. the first set consisted of pattern stimuli. they were eight photographs of floral patterns constructed by using six different motif presentation methods and two different value contrasts. The second set had eight clothing stimuli, photographs of clothings with the above floral patterns. The 7-point sementic differential scale of 19 bipolar adjectives was used as the response scale. The data was analyzed by factor analysis, ANOVA and T-test. The major findings from this study were as follows; 1. Four factors emerged to account for the dimensional structure of the floral pattern image. These factors were attractiveness, tenderness, attention, and maturity. among them attractiveness and tenderness were the major dimensions 2. The patterns and the clothings had no significant difference from each other in terms of attractiveness and tenderness, but in terms of maturity and attention. The pattern presented a cute and sober image, but the clothing presented mature and gorgeous image. 3. methods of motif presentation had significant effects on all the factors. The pattern by shading method gave the most attractive and soft image, the one by line the most soberest, the one by area the most gorgeous, the one by collage the most unattractive, hardest, and cutest, and the one by mosaics the maturest. 4. The value contrast between the motif and background had no significant effects on attractiveness and maturity, but on tenderness and attention. The patterns with a high valued background presented a soft image, but the one with a low valued background a hard image. The patterns with a low valued area presented gorgeous image.

• 패션비즈니스
• /
• 제15권5호
• /
• pp.144-160
• /
• 2011

This study investigated the colors of the costumes and backgrounds of characters in the films "Thirst" and "Mother" from an integrated perspective. As a study method, ten scenes per film, which contained the characters and backgrounds from the start to the end of the DVDs of "Thirst" and "Mother" were examined. For integrated color analysis of the costumes and backgrounds, the colors of the captured scenes were simplified to extract representative colors, and then color palettes were presented according to the ratio of area. The colors of costumes were analyzed by recognition through the eyes based on the I.R.I. Hue and Tone 120. Furthermore, the color images of the two films were analyzed using the I.R.I. adjective image scales and the I.R.I. color image scales. The colors of the film "Thirst" were generally low in brightness and high in chroma. They are characterized by dark, gloomy toned-down background in the first half, highly chromatic vivid background in the second half, and the contrast of purple blue colors and red colors. The colors of the film "Mother" are characterized by complementary colors between background and costume colors, and various tones of blue and green colors. From the aspect of color tones, they were relatively high in brightness compared to the film "Thirst" but low in chroma. On the I.R.I. adjective image scale, contrasting adjectives were extracted simultaneously from the film "Thirst" as the adjectives were evenly distributed at hard, dynamic and static, whereas the adjectives extracted from the film "Mother" were distributed at hard and statistic. On the I.R.I. color image scale, both films were located at hard, but the film "Thirst" was located at dynamic whereas the film "Mother" was located at static.