• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.2
• /
• pp.13-20
• /
• 1998

고속 디지털 MCM 응용을 위해 MCM-D 와 MCM-SLC 배선에서 CMOS 버퍼의 신호상승시간에 따른 신호전송특성을 연구하였다. 고속신호처럼 버퍼의 내부저항이 배선의 임피던스보다 작아 발생하게 되는 과도한 ringing은 MCM-D와 같이 lossy line의 전송감쇠 효과로 overshooting 이나 undershooting을 줄일 수 있지만 ringing에 의한 신호왜곡을 근 본적으로 막기위해서는 CMOS버퍼와 배선사이에 적절한 종단을 통해 임피던스 비해 크면 배선의 캐패시턴스에 의해 RC 지연이 증가한다. 그런데 MCM-D 배선은 단위길이당 캐패 시턴스도 작고 배선길이를 줄일수 있으므로 총 RC 지연은 MCM-SLC보다 작았다. 결론적 으로 MCM-D 배선이 MCM-SLC 배선에 비해 고속 디지털 MCM기판으로 적합한 것을 알 수 있었다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.587-596
• /
• 1998

본 논문에서는 RLCG 전송선로를 가진 Chua 회로에서의 카오스 동기화 방법 및 암호와 통신 방법에 대하여 연구하였다. 두 개의 동일한 Chua 회로에 전송 선로를 두어 RLCG 전송로를 구성한 후 송신부와 전송선로 사이는 구동-결합 동기 이론을, 전송선로와 수신부 사이는 결합 동기 이론을 적용한 동기화 방법을 제시하였으며, 이 동기화된 회로에 암호 통신방법을 적용하여 송신부에서 가산기에 의한 정보 신호와 카오스 신호를 합성하고 수신부에서 정보 신호와 카오스 신호를 분리하는 복조 방법을 제시하였으며, 선로 중간에서 정보 신호를 도청한 것과 수신부에서 복원된 신호를 비교하여 암호화 통신의 성능을 검증하였다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.2
• /
• pp.85-91
• /
• 2002

A novel multi-section power divider configuration is Proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a Planar multi-section three-Ports hybrid and a waveguide transformer design procedures. The multi∼section power divider is based on design theory of the optimum quarter- wave transformer Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode∼matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.699-706
• /
• 2008

This paper compares throughput performance of TCP and SCTP in a variety of network environments. For experiments, we construct a Linux-based testbed and consider a set of performance metrics such as MSS(Maximum Segment Size), transmission delay, and packet loss rate. In addition, we analyze the effect of SCTP multi-streaming on throughput. From the experimental results, we can see that SCTP provides throughput gain of approximately $20%{\sim}50%$ over TCP. This performance gain comes from the distinctive features of SCTP such as chunk bundling, initial congestion window of 2 MTU and SACK(Selective ACK) based error control. In the lossy networks, we can see that SCTP multi-streaming transmissions can effectively overcome the so-called HoLB(Head-of-Line Blocking) phenomenon of TCP.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.455-464
• /
• 2005

We have proposed a model of a thermal voltage converter(TVC) using the trans-impedance of lossy transmission line and developed a calculation program for ac-dc transfer difference of the TVC. The proposed TVC consists of a thermo-element(f) and a range resistor wire connected in series at the center of coaxial cylinder. The range resistor wire is used to extend the measurement range of the n. The calculated ac-dc transfer differences of the proposed TVC by simulation agree well with the measured values within the uncertainties. The simulated and measured values are agreed within $1{\mu}V/V$ from 40 Hz to 10kHz, within $5{\mu}V/V$ from 20kHz to 100MHz, and within $12{\mu}V/V$ from 200kHz to 1 MHz.

• Composites Research
• /
• v.21 no.5
• /
• pp.9-14
• /
• 2008

Carbon nanofibers (CNFs) were used as dielectric lossy materials and NiFe particles were used as magnetic lossy materials. Total twelve specimens for the three types such as dielectric, magnetic and mixed radar absorbing materials (RAMs) were fabricated. Their complex permittivities and permeabilities in the range of $2{\sim}18$ GHz were measured using the transmission line technique. The parametric studios for reflection loss characteristics of each specimen to design the single-layered RAMs were performed. The mixed RAMs generally showed the improved absorbing characteristics with thinner matching thickness. One of the mixed RAMs, MD3with the thickness of 2.00 mm had the 10 dB absorbing bandwidth of 4.0 GHz in the X-band ($8.2{\sim}12.4$ GHz). It also showed very broad 10 dB absorbing bandwidth as wide as 6.0 GHz in the Ku-band ($12.0{\sim}18.0$ GHz) with the thickness tuning to 1.49 mm. The experimental results for selected several specimens were in very good agreements with simulation ones in terms of the overall reflection loss characteristics and 10 dB absorbing bandwidth.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.5 s.335
• /
• pp.31-38
• /
• 2005

The architecture and the implementation details of a UTMI(USB2.0 Transceiver Macrocell Interface) compatible USB2.0 transceiver chip were presented. To confirm the validation of the incoming data in noisy channel environment, a squelch state detector and a current mode Schmitt-trigger circuit were proposed. A current mode output driver to transmit 480Mbps data on the USB cable was designed and an on-die termination(ODT) which is controlled by a replica bias circuit was presented. In the USB system using plesiochronous clocking, to compensate for the frequency difference between a transmitter and a receiver, a synchronizer using clock data recovery circuit and FIFO was designed. The USB cable was modeled as the lossy transmission line model(W model) for circuit simulation by using a network analyzer measurements. The USB2.0 PHY chip was implemented by using 0.25um CMOS process and test results were presented. The core area excluding the IO pads was $0.91{\times}1.82mm^2$. The power consumptions at the supply voltage of 2.5V were 245mW and 150mW for high-speed and full-speed operations, respectively.