• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2197-2210
• /
• 1998

In the grand alliance (GA) HDTV receiver, a coherent detection is empolyed for coherent demodulation of vestigial side-band (VSB) signal by using frequency and phaselocked loop(FPLL) operating on the pilot carrier. Additional phase tracking loop (PTL) employed to track out phase noise that has not been removed by the FPLL in theGA system. In this paper, we propose an algorithm for phase detection which utilizes a weighting function. The simplest implementation of the proposed algorithm using te sign of the Q channel component can be tractable by imposing a phase detection gain to the loop gain. It is obserbed that the propsoed algorithm has a robust characteristic against the performance of the digital filters used for Q channel estimation. A second goal of this paper is to introduce a gain control algorithm for the PTL in order to provide an effective implementation of the proposed phase detection algorithm. And we design the PTL through the realization of the simplified digital filter for H/W reduction. The proposed algorithms and the designed PTL are evaluated by computer simulation. In spite of using the simplified H/W structure, simulation results show that the proposed algorithms outperform the coventional PTL algorithms in the phase detection and tracking performance.

• 한국멀티미디어학회논문지
• /
• 제12권7호
• /
• pp.971-978
• /
• 2009

본 연구는 위상제어형 루프안테나에 관한 것으로서, 유전체기판 상에 에칭기법이나 프린트기법으로 루프안테나용 동박패턴을 제작함에 있어, 루프에서 발생하는 전자계가 서로 보완위상이 되게 배치하여, 인접하는 루프패턴 간에서 방사되는 전자계가 서로 충돌하지 않게 방사되는 위상제어형 루프코일 배치에 관한 것이다. 이 방법으로 인접하는 각 루프코일이 서로 보완위상으로 배치되어 전자계가 원만하게 방사되어, 방사 손실이 없고 방사 효율이 뛰어나게 된다. 또한 복수 개의 각 루프코일의 길이를 서로 달리함으로 인해, 각 루프코일의 길이가 달라짐에 따라 공진주파수가 달라지고, 이러한 공진점이 다른 루프코일을 밀결합 시킴으로 인해 공진주파수 대역을 넓게 할 수 있고, 원하는 대역만큼 조절할 수가 있게 된다. 이로 인하여 크기 20mm$\times$20mm 이하의 사이즈에, 두께 0.4mm 이하의 박막의 유전체기판에 CDMA850 휴대폰대역 및 PCS, WCDMA 등의 안테나를 구현하여 게인 0dBi 이상 방사효율 60% 이상의 안테나를 구현할 수가 있다.

• 제어로봇시스템학회논문지
• /
• 제17권7호
• /
• pp.634-640
• /
• 2011

When a servo position controller of a robot or a driving units is composed of a PID controller, servomechanism which is modelled is composed of current, velocity and position control loops. After this model is simulated, the technique operating gain of each controller is suggested. The model consists of current, velocity and position controllers from the inside to the outside gradually. Also, to combine velocity and position controllers with 2 order system, simulation is performed after current controllers are composed, which are able for current loop to work ideally. If a current controller is treated with constant, it is possible for velocity and position controller to consist of controller into 2 order system. The technique is verified by applying T-company servo motor which is much more applied to current, velocity and position controller robots.

• ETRI Journal
• /
• 제33권2호
• /
• pp.201-209
• /
• 2011

This paper presents a wide-band fine-resolution digitally controlled oscillator (DCO) with an active inductor using an automatic three-step coarse and gain tuning loop. To control the frequency of the DCO, the transconductance of the active inductor is tuned digitally. To cover the wide tuning range, a three-step coarse tuning scheme is used. In addition, the DCO gain needs to be calibrated digitally to compensate for gain variations. The DCO tuning range is 58% at 2.4 GHz, and the power consumption is 6.6 mW from a 1.2 V supply voltage. An effective frequency resolution is 0.14 kHz. The phase noise of the DCO output at 2.4 GHz is -120.67 dBc/Hz at 1 MHz offset.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.369-374
• /
• 2011

Usually, a LPF (low pass filter) is used in the feedback loop of a SRF (synchronous reference frame) - PLL (phase locked loop) system because the measured grid voltage contains harmonic distortions and sensor noises. In this paper, it is shown that the cut-off frequency of the LPF should be designed to suppress the harmonic ripples contained in the measured voltage. Also, a new design method for the loop gain of the PI-type controller in the SRF-PLL is proposed with consideration of the dynamics of the LPF. As a result, a better transient response can be obtained with the proposed design method. The LPF frequency and the PI controller gain are designed in coordination according to the steady state and dynamic performance requirements. Furthermore, in the proposed method, the controller gain and the LPF cut-off frequency are changed from their normal value to a transient value when a voltage disturbance is detected. This paper shows the feasibility and usefulness of the proposed methods through the computer simulations and experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.920-925
• /
• 1993

For a multi-input, multi-output system, it is widely known that feedback control gain presents extra freedom pole placement problem. An eigenstructure assignment utilizes this freedom for assignment of all or some elements of the closed-loop eigenvectors. In this paper, a nonlinear optimization technique is adopted to obtain a small gain controller that assigns closed-loop eigenvalues and elements of eigenvectors simultaneously. To illustrate the approach, a numerical example of the Airplane mode decoupling using an advanced fighter is shown.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.235-239
• /
• 1989

This paper investigated the effect of right half plane zero on the transient response in the buck-boost DC-DC converter. And it is clarified that the damping ratio decreases gradually by increases of the feedback loop gain and the regulation system of the converter becomes unstable. From the result, we obtained the stability region about the duty ratio and the output current by evaluating the feedback loop gain.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.469-470
• /
• 2008

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권3호
• /
• pp.142-147
• /
• 2003

We consider a single-input-single-output nonlinear system which can be represented in a normal form. The nonlinear system has a modeling uncertainties including the input coefficient uncertainty. A high-gain observer is used to estimate the states variables to reject a modeling uncertainty. A globally bounded output feedback integral sliding mode control is proposed to stabilize the closed loop system. The proposed integral sliding mode control can asymptotically stabilize the closed loop system in the presence of input coefficient uncertainty.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.48.5-48
• /
• 2001

The resulting stabilizing controller in this paper consists of the disturbance estimator and the gain scheduled controller. The disturbance estimator tracks the unknown external disturbance and its derivative information in the closed-loop control system using fuzzy logic based adaptation law. Moreover, the gains of the stabilizing controller are appropriately scheduled according to the estimated values. Furthermore, since the estimation law is combined with the stabilizing controller in the closed control loop, it asymptotically minimizes the estimation error. In order to conrm the usefulness of the proposed control scheme, it is applied to the magnetic suspension systems.