• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2139-2144
• /
• 2008

There are eight kinds of railroad vehicles such as KTX, PP(Push-Pull), NEL(New Electric Locomotive), EL(Electric Locomotive), DL(Diesel Locomotive), CDC(Commuter's Diesel Car), VVVF(Variable Voltage Variable Frequency) and Resistance Control Car that Korail corporation presently runs, and a variety of vehicles just like EMU(Electric Multiple Unit) and DMU(Diesel Multiple Unit) currently developed and accepted are running in the near future. However, There is still no design standard of the control stand of cockpit and the same compatibility of forms and control unit arrangements for locomotive engineers because no one has tried to approach in an ergonomic way. It can cause Locomotive engineers to make errors using the machinery. when the new vehicles are adopted, The efficiency of operation will quite fall down due to the separate training of the engineers. Therefore, We'd like to improve the accuracy of manipulating the machinery used by the engineers at all times according to the design standard of ergonomic technology and safety engineering and increase the operational efficiency and the safety of railroad vehicles in order to handle the problems as quickly as we can in an emergent situation.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1292-1296
• /
• 2004

This study is experimented results of running characteristics about electric locomotive. it executed to study a power quality in the substation of Honam electrification line and to promote knowledge, observation and management in electric rail-system. we measured to know the more exactly running characteristics that electric locomotive and electric substation at the same time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.869-872
• /
• 2001

A new in-pipe locomotive mechanism is developed using piezoelectric bimorphs. Two bimorphs are linked serially and produce an ellipsoidal motion at the end of bimorph. The device moves by the friction force between the rubber attached at the bimorph end and the inner surface of the pipe. The developed mechanism is very simple and need relatively small power compared to a conventional multi-layer piezoelectric motor.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.29-32
• /
• 2002

The developed locomotive in coal mine drawn by the parallel drive system of the double Switched Reluctance motors is introduced. The operational principles, the control pattern and the component parts of the traction and the regenerative braking operation are proposed. The drive system contributes to reduce the cost of utilization of the locomotive per ton kilometer.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.3
• /
• pp.138-143
• /
• 2011

Electric locomotive is adapted to high speed driving and mass transportation due to obtaining high traction force. The electric locomotive is operated by motor blocks and traction motors. Train speed is controlled by suppling power from motor blocks to traction motors according to reference speed. Speed control of the electric locomotive is efficient by spending energy between motor blocks and traction motors. Currently, switched reluctance motors have been studied because the efficient is higher than induction motors. In this paper, model of the switched reluctance motor is presented and the PID controller is applied to the model for the speed control by using Simulink. Asymmetry converter is used for real-time control and system performance is demonstrated by simulating the speed of switched reluctance motor including PID controller.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1296-1301
• /
• 2002

In recent years, the pathology in the colon grows up annually since people of all ages prefer to have less fiber and more fat food. Therefore, the colonoscopy is generalized in developed countries. But it requires much time to acquire a dexterous skill to perform an operation and the procedure is painful to the patient. Therefore, some studies on the development of autonomous colonoscope are carried out. In this paper, we propose a new and simple locomotive mechanism that can be propelled by elliptic motion of a leg. It has several legs that have constant phase difference each other and those legs are disposed along the upper and lower of the body. In order to evaluate the performance of locomotive mechanism, we carried out the simulations of moving characteristics and the experiments in the colon of a dead pig.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.152-157
• /
• 2006

The air pollutant emission from the railroad diesel locomotive is still a significant environmental concern in many countries including Korea and Unites States. The emission characteristics of the railroad diesel locomotive were extensively studied in this study. Particulate matter (PM) and nitrogen oxides ($NO_x$) emitted from a large locomotive engine (2-cycle, 16-cylinder, and 3,000-horsepower) under various engine-rating conditions was analyzed with a scanning mobility particle sizer and a gas stack sampler by using a dilution tunnel. We could gain the emission values of 2.1 g/horsepower-hour for PM and 42.7 g/horsepower-hour for $NO_x$. We proposed the emission reduction goal of the railroad diesel locomotive for Korea in comparison with the regulation of United States.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.216-221
• /
• 2017

In this paper, the converter and traction system of 8200 electric locomotive is modeled using matlab simulation module. And the characteristic was analyzed through simulation of the combined system of converter and inverter for controling 8200 electric locomotive. The validity of the simulation was proved through performing unit power factor control of converter and speed control of inverter.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.49
• /
• pp.89-98
• /
• 1999

The objective of this study is to develop an improved algorithm for layout problems. Computerized facility layout program was also applied to solve the layout problem in locomotive maintenance workshop. The current facility layout is structured in the large space without considerations of many variable factors. For this reason, effectiveness of layout results in loss on effective space utility. This study is to develop an algorithm in the consideration of importance weight and desirable shape of specific department in the computerized layout planning and quantitative relationship rating between each department was used. Standard process duration of locomotive maintenance workshop was used to select the main activities of locomotive maintenance work. This study could generate more efficient facility layout design to reduce the number of movement frequency and travel distance in maintenance workshop.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1717-1722
• /
• 2018

Parts and units of 8200 series electric locomotive are aging, but and source technology is not secured. As a results, maintenance costs are increasing steadily due to using expensive substitute parts. Therefore, various studies have been conducted to reduce maintenance costs. In this paper, the life cycle cost(LCC) of the developed and conventional products were compared and analyzed about main conversion system in 8200 Series electric locomotive. As a result of analysis, the material cost was the highest in the conventional product among the various item costs. On the other hand, it is confirmed that preventive cost was the highest among the costs about the developed product.