• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.115-121
• /
• 1999

Advanced digital computer technology enables the computer-based controllers to replace the traditional analog controllers used in factory automations. This replacement, however, brings up the side effects caused by the quantization error and non-real-time execution of control software. This paper describes the structure of real-time simulator and controller that can be used for design and verification of real-time digital controllers. The virtual machine concept adopted by the proposed real-time simulator makes the proposed simulator be independent from the specific hardware platforms. The proposed system can also be used in the loosely coupled distributed environments connected through local area network using real-time message passing algorithm and virtual data table based on the shared memory mechanism.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.2 s.2
• /
• pp.177-184
• /
• 1993

To obtain large scale precise geographical information in local area we determined external orientation parameters of camn exactly and conducted aerial photography using remote control airship loaded 35mm non-metric camera that produced systematic error coefficients. Ground control Points were determined by differential GPS. Therefore we can try to improve accuracy and economical efficiency. Also, it is suggested that remote control airship photogrammetry can be applied to make large scale topographic map using analytical plotter as calibrated accuracy.

• Journal of Biosystems Engineering
• /
• v.25 no.6
• /
• pp.457-462
• /
• 2000

Boom sprayers have been known by their excellency in field efficiency worker’s safety and pest control efficacy. The boom sprayer in Korea that was developed for paddy field is not suitable for upland field of which shape is irregular and inclination is steep, due to heavy chemical tank long boom width and manual on-off control of spraying. The goal of the study was to develope a boom control system that could control boom angles of left and right boom automatically and independently corresponding to local field slope. The prime mover was selected as a cultivating tractor. Main results of this study were as follows. 1. Ultrasonic sensor whose response time was 0.1s and response angle was within $\pm$20$^{\circ}$was selected to measure distance. Voltage output of the sensor(X, Volt) had a highly significant linear relationship with the vertical distance between the sensor and ground surface(Y, mm) as follows; Y=0.0036X-0.437 2. Left and right section of the boom could be folded up by a position control device(on-off control) which could control the left and right boom independently corresponding to local slope by equalizing distances between the sensor and boom at the center and left/right boom. Most reliable DB(dead band) was experimentally selected to be 75$\Omega$(6cm). 3. At traveling velocity of 0.3~0.5m/s RMS of error between desired and achieved height was less than 4.5cm The developed boom angle controller and boom linkage system were evaluated to be successful in achieving the height control accuracy target of $\pm$10cm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.762-766
• /
• 2003

In this paper, we present a new approach to solve the problem of estimating the camera 3-D location and orientation from a matched set of 3-D model and 2-D image features. An iterative least-square method is used to solve both rotation and translation simultaneously. Because conventional methods that solved for rotation first and then translation do not provide good solutions, we derive an error equation using roll-pitch-yaw angle to present the rotation matrix. To minimize the error equation, Levenberg-Marquardt algorithm is introduced with uniform sampling strategy of rotation space to avoid stuck in local minimum. Experimental results using real images are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.210-210
• /
• 2000

In this paper, we have investigated the properties of multi-layer perceptron (MLP) for odour patterns classification and concentration estimation simultaneously. When the MLP may be has a fast convergence speed with small error and excellent mapping ability for classification, it can be possible to use for classification and concentration prediction of volatile chemicals simultaneously. However, the conventional MLP, which is back-Propagation of error based on the steepest descent method, was difficult to use for odour classification and concentration estimation simultaneously, because it is slow to converge and may fall into the local minimum. We adapted the Levenberg-Marquardt(LM) algorithm [4,5] having advantages both the steepest descent method and Gauss-Newton method instead of the conventional steepest descent method for the simultaneous classification and concentration estimation of odours. And, We designed the artificial odour sensing system(Electronic Nose) and applied LM-BP algorithm for classification and concentration prediction of VOC gases.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.739-742
• /
• 2000

In this paper, we evaluate the throughput and delay performance of a wireless Local Area Network(WLAN) employing the OFDM-based IEEE 802.lla Medium Access Control(MAC) protocol by compute. simulations under wireless indoor. channel. Packet Error Rate(PER) is also investigated for the various Eb/No. It is shown that, with soft-decision Viterbi decoder, throughput and delay performance are close to those of error-free channel at Eb/No above 8dB and PER is about 2${\times}$10$\^$-5/ at Eb/No=10dB.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.402-410
• /
• 2019

Local area festivals have grown on a scale for the past 20 years, but have suffered ups and downs. Through the trial and error of the festival operation, problems such as prediction of the number of visitors, planning of event scale, calculation and expansion of sales volume, and management of various participants in the duration were highlighted. To solve, this study designed and developed a mobile payment system and festival operation management system for local scale festivals as a platform operating system of web and app combined. The results of this study presents four basic functions. It includes ticketing management, attendance identification and entrance control, charge of festival currency and use of payments, real-time provision and management of related information, and performance reporting for each role. It was applied to local festivals in practice as to enable local shop owners to participate in advertisements or sponsorships and confirmed their contribution to local commercial market and the revitalization of festivals through this system.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.3
• /
• pp.86-92
• /
• 2000

In this paper, we develop protocol analyzer that can analyze and monitor LAN(Local Area Network)-based TCP/IP protocol using the OOP(object-oriented programming) in Windows98/NT environment. TCP/IP(Transmission Control Protocol/Internet Protocol) protocol analyzer is consist of interface hardware, protocol analysis software and GUI(Graphic User Interface). It is designed for the real-time analysis using the real-time object. In results of Performance test, TCP/IP Protocol analyzer is showed that it can analyze and monitor without frame error in LAN-based. Also, developed protocol analyser operates better than conventional protocol analyzer in performance. It can be used in maintenance fields of communication and network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3161-3167
• /
• 2010

Hall sensors of BLDC(brushless DC) motor are used to detect a position information for a control mechanism, which implements an algorithm for velocity and position control. Actual azimuth and altitude were measured to evaluate a control precision. The measurement revealed comparatively good accuracy that the measured values were $2.02^{\circ}$ and $1.01^{\circ}$ respectively, and the maximum error falls within $1.86^{\circ}$. The developed monitoring system of photovoltaic generation plants is a LCU(Local Control Unit) based on an integrated monitoring system which supports 1:N method for multiple simultaneous connections, remote control and real-time system state monitoring.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.255-263
• /
• 2013

Purpose: It is not easy to drive a rice-transplanter avoiding underlapped or overlapped transplanting in paddy fields. An automated guidance system for the riding-type rice-transplanter would be necessary to operate the rice-transplanter autonomously or to assist the beginning drivers as a driving aid. Methods: A prototype of guidance system was composed of embedded computers, RTK-GPS, and a power-steering mechanism. Two Kalman filters were adopted to overcome sparse positioning data (1 Hz) from the RTK-GPS. A global Kalman filter estimated the posture of rice-transplanter every one second, and a local Kalman filter calculated the posture from every new estimation of the global Kalman filter with an interval of 200 ms. A PID controller was applied to the row-following mode control. A control method of U-turning mode was developed as well. A stepping motor with a reduction gear set was used to rotate the shaft of steering wheel. Results: Test trials for U-turning and row-following modes were done in a paddy field after some parameters have been tuned at the ground speed range of 0.3 ~ 1.2 m/s. The minimum RMS error of offset was 3.13 cm at the ground speed of 0.3 m/s while the maximum RMS error was 13.01 cm at 1.2 m/s. The offset RMS error tended to increase as the ground speed increased. The target point distance, LT also affected the system performance and PID controller parameters should be adjusted on different ground speeds. Conclusions: A target angle-based PID controller plus stationary steering angle controller made it possible for the rice-transplanter to steer autonomously by following a reference line accurately and even on U-turning mode. However, as condition in paddy fields is very complicated, the system should control the ground speed that prevents it from deviating too much due to ditch and slope.