• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.135-139
• /
• 2017

The main reason for heat accidents occurring at the after stern tube bearing (STB) is excessive local pressure caused by the deflection of the propulsion shaft due to propeller loads. The probability of a heat accident is increased by the low flexibility of the shaft system in very large crude oil carriers (VLCCs) as the engine power and shaft diameter increase and the distance decreases between the forward and after STBs. This study proposed shaft system with only an after STB and no forward STB for a flexibility acquisition method for a VLCC shaft system under hull deformation. A Hertzian contact condition was applied, which assumes a half-elliptical pressure distribution along the contact width for the calculation of the local squeeze pressure. The propeller loads, heat effect, and hull deflection under engine operating conditions are also considered. The results show that the required design criteria were satisfied by building a partial slope at the white metal, which is the material at the axial contact side in the after STB. This system could reduce building cost by simplification of the shaft system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.6
• /
• pp.619-627
• /
• 2016

Cells of a PV (photovoltaic) module can suffer defects due to various causes resulting in a loss of power output. As a malfunctioning cell has a higher temperature than adjacent normal cells, it can be easily detected with a thermal infrared sensor. A conventional method of PV cell inspection is to use a hand-held infrared sensor for visual inspection. The main disadvantages of this method, when applied to a large-scale PV power plant, are that it is time-consuming and costly. This paper presents an algorithm for automatically detecting defective PV panels using images captured with a thermal imaging camera from an UAV (unmanned aerial vehicle). The proposed algorithm uses statistical analysis of thermal intensity (surface temperature) characteristics of each PV module to verify the mean intensity and standard deviation of each panel as parameters for fault diagnosis. One of the characteristics of thermal infrared imaging is that the larger the distance between sensor and target, the lower the measured temperature of the object. Consequently, a global detection rule using the mean intensity of all panels in the fault detection algorithm is not applicable. Therefore, a local detection rule was applied to automatically detect defective panels using the mean intensity and standard deviation range of each panel by array. The performance of the proposed algorithm was tested on three sample images; this verified a detection accuracy of defective panels of 97% or higher. In addition, as the proposed algorithm can adjust the range of threshold values for judging malfunction at the array level, the local detection rule is considered better suited for highly sensitive fault detection compared to a global detection rule. In this study, we used a panel area extraction method that we previously developed; fault detection accuracy would be improved if panel area extraction from images was more precise. Furthermore, the proposed algorithm contributes to the development of a maintenance and repair system for large-scale PV power plants, in combination with a geo-referencing algorithm for accurate determination of panel locations using sensor-based orientation parameters and photogrammetry from ground control points.

• Economic and Environmental Geology
• /
• v.35 no.2
• /
• pp.137-147
• /
• 2002

Natural geological and environmental processes reflect to element abundances in geological materials on the surface. This study aims to elucidate a possibility of geostatistical application to differentiate geochemical anomalies affected by anthropogenic and geogenic factors. A regional geochemical map was produced using 'inverse distance weight interpolation' method for analytical results of stream sediments «150 11m) which were collected from 2,290 first- to second-order streams over the whole Gyeonggi Province. The Jurassic granitic batholith in the southeastern province was selected as a target for the geostatistical examination. Factor analysis was conducted using 22 elements for stream sediments from 445 drainage basins over the granitic body. Co, Cr, Sc, MgO, Fe$_{2}$O$_{3}$, V, and Ni were grouped with high correlation coefficients and the depletion of the components may reflect the whole-rock chemistry of the granite. Regression analysis was done using Co, Cr, and Sc as dependent variables and other six components as independent variables, and the results were drawn as maps. The maps acquired generally show quite similar distribution patterns with those of concentrations of each variable. The similarity in the spatial patterns between the two maps indicates that the application of regression statistics can be valid for the interpretation of regional geochemical data. However, some components show local discrepancies which may be influenced by secondary factors regardless of the basement lithology. The regression analysis may be effective in extracting local geochemical anomalies which may reflect rather anthropogenic pollutions than geogenic influences.

• Journal of dental hygiene science
• /
• v.15 no.6
• /
• pp.728-735
• /
• 2015

This research was based on using status and factors associated in public health centers survey in 703 local residents from September 1 to 25, 2015. Data were analyzed with chi-square test, t-test, one way ANOVA, and Stepwise Multiple Regression analysis using SPSS WIN 21.0 program and significance level was set at p<0.05. It was investigated that Incheon city health centers' utilization of residents were 38.8%, the annual average of utilization was 3.92 times. Health centers were mainly used by themselves (25.3%) or recommendation of the people around them (17.8%). The reason why they don't use was no need (27.0%) and don't know well (9.4%) or long distance (7.8%). The average of awareness about the total health programs was 41.2%, the average of utilization rate was 8.1%, both higher rate of awareness and utilization about health programs were vaccination (86.6%, 36.9%), and health examinations (67.2%, 18.7%). The average of satisfaction about health programs was 3.88 out of 5, sealant (4.26 points) and rationing fluoride solution (4.07 points) indicated a high level of satisfaction. The most common factor which represents the impact on public health use and use frequency were the time it takes to move, also gender, age and form of home ownership were major factor in common. Based on this, we have to seek concrete measures of national health programs which conducted to improve the health of local residents can be implemented successfully.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.507-517
• /
• 2012

The main purpose of this study is to address flooding resilient land use management strategy based on the distributional characteristics of storm damage areas in Gyeonggi-do. The employed methods are 1) Exploratory Spatial Data Analysis (ESDA) to understand the spatial patterns of storm damage areas occurred from 2005 to 2009, 2) Local Indicator of Spatial Association (LISA) to examine spatial autocorrelation existed in storm damage areas for the year of 2009. The results show that 1) crop land damage is very sensitive to heavy precipitation, 2) damaged buildings are found in all over the Gyeonggi areas, but relatively more damages are in the regions closed to the City of Seoul, 3) damaged roads-bridges, streams, and reaches are found in mostly rural areas, 4) building and crop land damage occurs mostly in lowlands with different spatial patterns. These findings imply that 1) it will be useful to consider the average distances and slopes of damaged building and crop lands from streams for the decision making of land use management strategy, 2) further management efforts are required in the north, east, and south regions of Gyeonggi areas to prevent roads-bridge, stream, and reach damages, 3) the present land use pattern needs to be carefully investigated by considering the damage clustered areas for the year of 2009 based on watershed and municipality boundaries.

• The Korean Journal of Financial Management
• /
• v.25 no.4
• /
• pp.1-24
• /
• 2008

We empirically examined the forecasting abilities of analysts in the Korean stock market with regard to their earnings estimates, and the impacts of their reports on stock prices. Further, we also examine if there is any difference in analysts' forecasting accuracy and stock prices impacts depending upon the geographical distance between analysts and companies they follow. We found the following interesting empirical results. First, analysts have tendency to overestimate sales, operating income, and net income, consistent with the previous literature. Second, the degree of overestimation depends upon the geography of companies. That is, it is smaller for companies headquartered in Seoul than companies in local provinces. Third, analysts' earnings estimates are also more accurate for companies located in Seoul. So, we conjecture that analysts have easier access to the information for the companies. Fourth, when analysts downgrade target prices, companies in Seoul are less negatively affected than those in local provinces. Even when analysts revise downward stock recommendations, stock prices of companies in Seoul go up. Overall, analysts' price impacts are more favorable for Seoul-located companies. Last, but not least, when foreign ownership is higher, investors react less negatively to downward revisions of stock recommendation, but react more negatively to downward revisions of target prices.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.176-181
• /
• 2013

The impacts of habitats changes of benthic macroinvertebrae species and individuals of the torrents due to construction of torrent structures can be summarized as follows. Approximately 16 to 40 species and 352 to 4,333.3 individuals of benthic macroinvertebrae were found around the local position of the torrent structures. Construction of torrential structures can increases the stability in the riverbed by preventing vertical corrosion and reducing the flow rate. However, if pond is created due to increase flow rate of rainfall, the temporal confusion of micro-habitats may lead to decrease in the number of species and induce reduced number of diversity as well as cause simplification in the community structure. Therefore, erosion control structures in torrent cause influence on the habitual ecosystem, though there are differences in the degree per distance depending on the types and heights of the structure. Before establishing torrent erosion control structure in mountainous torrent area, ecosystem status should be studied carefully from the planning stage and torrent habitats should be protected by deciding type, height and scale of structure, to minimize the influence on local habitants.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1845-1852
• /
• 2008

The key elements of inter prediction are motion estimation(ME) and motion compensation(MC). Motion estimation is to find the optimum motion vectors, not only by using a distance criteria like the SAD, but also by taking into account the resulting number of 비트s in the 비트 stream. Motion compensation is compensate for movement of blocks of current frame. Inter-prediction Encoding is always the main bottleneck in high-quality streaming applications. Therefore, in real-time streaming applications, dedicated hardware for executing Inter-prediction is required. In this paper, we studied a motion estimator(ME) for H.264/AVC. The designed motion estimator is based on 2-D systolic array and it connects processing elements for fast SAD(Sum of Absolute Difference) calculation in parallel. By providing different path for the upper and lower lesion of each reference data and adjusting the input sequence, consecutive calculation for motion estimation is executed without pipeline stall. With data reuse technique, it reduces memory access, and there is no extra delay for finding optimal partitions and motion vectors. The motion estimator supports variable-block size and takes 328 cycles for macro-block calculation. The proposed architecture is local memory-free different from paper [6] using local memory. This motion estimation encoder can be applicable to real-time video processing.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.9
• /
• pp.67-76
• /
• 2010

This paper proposes a image-based water level measurement method, which adapt to the ruler's surface condition. When the surface of a ruler is deteriorated by mud, drifts, or strong light reflection, the proposed method judges the pollution of ruler by comparing distance between two levels: the first one is the end position of horizontal edge region which keeps the pattern of ruler's marking, and the second one is the position where the sharpest drop occurs in the histogram which is construct using image density based on the axis of image height. If the ruler is polluted, the water level is a position of local valley of the section having a maximum difference between the local peak and valley around the second level. If the ruler is not polluted, the water level is detected as the position having horizontal edges more than 30% of histogram's maximum value around the first level. The detected water level is converted to the actual water level by using the mapping table which is construct based on the making of ruler in the image. The proposed method is compared to the ultrasonic based method to evaluate its accuracy and efficiency on the real situation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.181-189
• /
• 2019

In this study, a triple-band antenna that can be used in WLAN(Wireless Local Area Network) at 2.4 GHz, 5.8 GHz, and 5G at 3.5 GHz is fabricated. The proposed antenna uses a parasitic element to show the triple band, and the reflector is used at a distance of ${\lambda}/4$ from the antenna to reduce the Specific Absorption Rate(SAR). Its dimensions are $100{\times}75{\times}1.6mm^3$ and each parameter value is optimized for better performance and a lower SAR value. As a result, we obtained a bandwidth of 540 MHz(2.02~2.56 GHz), 390 MHz(3.39~3.78 GHz), and 1,210 MHz(5.56~6.77 GHz) based on the reflection loss factor of -10 dB. In addition, the SAR values of the antenna with reflector are observed to reduce below the SAR value of international standard.