• Journal of Korean Academy of Nursing
• /
• v.29 no.4
• /
• pp.829-840
• /
• 1999

This study was conducted to construct a hypothetical model of depression in Korean adolescent women and validate the fit of the model to the empirical data. The data were collected from 345 high school girls in Seoul, from May 1 to June 30, 1998. The instruments were the Body Mass Index, Physical Satisfaction Scale, Family Adaptatibility and Cohesion Evaluation Scale III, Family Satisfaction Scale, CES-D and School Adptation Scale. The data were analyzed using descriptive statistics with the pc -SAS program. The Linear Structural Relationship(LISREL) modeling process was used to find the best fit model which would predict the causal relationships among the variables. The overall fit of the hypothetical model to the data was moderate ［X$^2$＝69.6(df＝17, p＝.000), GFI ＝0.95, AGFI＝0.90, RMR＝0.087, NNFI＝0.86, NFI＝0.90］. The predictable variables, especially menstrual symptoms, physical symptoms and family function, had a significant direct effect on depression. but school life adaptation did not have a significant direct effect. These variables explained 18.1% of the total variance.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09b
• /
• pp.53-60
• /
• 2010

The natural soils are classified in saturated soils and unsaturated soils according to level of ground water but the research for only saturated soils has been conducted by this time. However, there are many proble.ms which are not solved by using the concept and principle of saturated soils on the natural soils. In fact, it is known that unsaturated soils represent the behavior characteristic unlike completely saturated soils because of the adhesion under the influence of negative pore water pressure, the high angle of friction and the low water permeability by the air entry. So it needs to conduct the various researches on insufficient unsaturated soils. In this paper, unsaturated triaxial compressive tests are conducted in order to do research on shear strength characteristic on sands and silty sands of Nakdong river. As a result of the tests, the cohesion is increased in non-linear type according to the change of the matric suction, but the angle of internal friction is not changed much.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.03a
• /
• pp.161-168
• /
• 1997

The purpose of this study is to evaluate the possibility of normalization of the distibutions of soil parameters taken from soft ground and the reliability of the safety factors of specific objects on it, including sanitary landfill. Through this study it is found that distributions of soil parameters could be adjusted to appropriate normal distributions as possibility density functions(PDF), and that especially the group of initial cohesions and the coresponding safety factors has a perfect linear correlation. According to those results the PDF to initial cohesion as possibility parameter can not only be tmsformed to the PDF to safety factor but also, conseqently, the reliability of the safety factor(SF) simply based on the mean value of soil parameter(Co) can be calculated or easily picked up from the standrad normal distribution table. It is therefore concluded that even though calculated values of safety factors are over any standard requirements some possibility of risk both to the objects and natural soft ground could be still existing, and also a new standard value for this slope stability control system should be derived just by adjusting old one according to the magnitude of risk possibility.

• Geomechanics and Engineering
• /
• v.10 no.5
• /
• pp.617-633
• /
• 2016

A numerical study has been conducted to examine the improvement achieved in the ultimate pullout capacity of horizontal circular anchor plates embedded in undrained clay, by constructing granular columns of varying diameter over the anchor plates. The analysis has been carried out by using lower bound theorem of limit analysis and finite elements in combination with linear programming. The improvement in uplifting capacity of anchor plate is expressed in terms of an efficiency factor (${\xi}$). The efficiency factor (${\xi}$) has been defined as the ratio of ultimate vertical pullout capacity of anchor plate having diameter D embedded in soft clay reinforced by granular column to the vertical pullout capacity of the anchor plate with same diameter D embedded in soft clay only. The variation of efficiency factor (${\xi}$) for different embedment ratios and different diameter of granular column has been studied considering a wide range of softness of clay and different value of soil internal friction angle (${\phi}$) of the granular material. It is observed that ${\xi}$ increases with an increase in diameter of the granular column ($D_t$) and increase in friction angle of granular material. Also, the effectiveness of the usage of granular column increases with decrease in cohesion of the clay.

• Tunnel and Underground Space
• /
• v.15 no.3 s.56
• /
• pp.228-235
• /
• 2005

Friction angle and cohesion of rock masses can be estimated from Hoek and Brown failure criterion and then plastic corrections can be applied using Mohr-Coulomb yield function. This study finds that this estimation procedure would not be appropriate for weak rock masses and for cases where low confining stress is expected to develop. A procedure is outlined in this paper for estimating plastic corrections directly from Hoek and Brown material model. Comparative study shows that direct procedure would simulate non-linear failure surface better than indirect procedure especially in the low confining stress regime.

• Advances in biomechanics and applications
• /
• v.1 no.1
• /
• pp.23-40
• /
• 2014

This paper examines the blood chamber of a left ventricular assist device (LVAD) under static loading conditions and standard operating temperatures. The LVAD's walls are made of a temperature-sensitive polymer (ChronoFlex C 55D) and are covered with a titanium nitride (TiN) nano-coating (deposited by laser ablation) to improve their haemocompatibility. A loss of cohesion may be observed near the coating-substrate boundary. Therefore, a micro-scale stress-strain analysis of the multilayered blood chamber was conducted with FE (finite element) code. The multi-scale model included a macro-model of the LVAD's blood chamber and a micro-model of the TiN coating. The theories of non-linear elasticity and elasto-plasticity were applied. The formulated problems were solved with a finite element method. The micro-scale problem was solved for a representative volume element (RVE). This micro-model accounted for the residual stress, a material model of the TiN coating, the stress results under loading pressures, the thickness of the TiN coating and the wave parameters of the TiN surface. The numerical results (displacements and strains) were experimentally validated using digital image correlation (DIC) during static blood pressure deformations. The maximum strain and stress were determined at static pressure steps in a macro-scale FE simulation. The strain and stress were also computed at the same loading conditions in a micro-scale FE simulation.

• Tunnel and Underground Space
• /
• v.28 no.5
• /
• pp.426-441
• /
• 2018

Recently, the generalized Hoek-Brown (GHB) failure criterion has been actively employed in various rock engineering calculations, but the analytical form of the corresponding Mohr failure envelope is not available, making it difficult to extend the application of the GHB criterion. In order to overcome this disadvantage, this study proposes a new method to express the tangential friction angle as an explicit function of normal stress by invoking the polynomial best-fitting to the relationship between normal stress and tangent friction angle implied in the GHB failure function. If this normal stress - tangential friction angle relationship is best-fitted with linear or quadratic polynomial function, it is possible to find the analytical root for tangential friction angle. Subsequently, incorporating the root into the relationship between shear stress and tangential friction angle accomplishes the derivation of the approximate Mohr envelope for the GHB criterion. It is demonstrated that the derived approximate Mohr failure envelopes are very accurate in the entire range of GSI value.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.77-88
• /
• 1984

By investigating the characteristics of various factors about soil and pile containing in the theoretical equations of lateral earth pressures acting on a row of passive piles which have been already presented in the previous. papers, the equations are arranged as a simple form which is convenient to use. The simplified equation is examined so as to be also utilized to single passive pile. And a discussion is carried out on the method how to apply the equations to field. As the result of this study, the equations can be arranged as a simple linear equation with the coefficients of lateral force $K_{p1}$ and $K_{p2}$. And the simple linear equation is composed of cohesion c and earth pressures ${\sigma}_H$ acting on backside of pile's row against the direction of soil deformation. In order to apply this equation to field, the active earth pressure can be considered as the earth pressure ${\sigma}_H$. The validity of this consideration is justified by comparing the theoretical values of lateral earth pressures acting on piles with the values observed in field.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.596-608
• /
• 1997

The purpose of this study was to compare the apical leakage and adaptation to the dentinal wall of a glass ionomer root canal cement(Ketac-Endo) with those of AH-26 and Tubli-Seal. 102 single-rooted teeth were insrumented with step-back technique and randomly divided into four groups according to kinds of root canal cements: Ketac-Endo, AH-26, Tubli-Seal, and no root canal cement. Four experimental groups were as follows; Group 1 : Filling with gutta-percha and Ketac-Endo Group 2 : Filling with gutta-percha and AH-26 Group 3 : Filling with gutta-percha and Tubli-Seal Group 4 : Filling with gutta-percha without root canal cement All the specimens were obturated with lateral condensation technique, and stored in 100% humidity for 4 days. 20 teeth in each group were placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. And they were evaluated for linear dye leakage using a stereoscope and analyzed by one-way ANOVA. 22 teeth were split longitudinally and evaluated the adaptation to the dentinal wall using scanning electron microscope(4 teeth in each group) and stereoscope(2 teeth in 1, 2, 3 group). The obtained results were as follows ; 1. In case of not used root canal cement(Group 4), there was showed much degree of dye penetration comparerd with used root canal cements (Group 1, 2, 3)(P<0.01). 2. In the case of used root canal cements(Group 1, 2, 3), there was no significant difference in linear leakage in groups(P>0.01). 3. In the case of used root canal cements(Group 1, 2, 3), there was showed intimate adaptation to the dentinal wall independent on kinds of root canal cements. 4. Fractured surfaces indicated failure of cohesion in Ketac-Endo, and failure of adhesion to dentine in AH-26 and Tubli-Seal. 5. According to similar apical leakage and adaptability to the dentinal wall to another root canal cements, it is possible to be used glass-ionomer cement as root canal cement.

• Tunnel and Underground Space
• /
• v.10 no.2
• /
• pp.180-195
• /
• 2000

Grouting has been practiced as a reliable technique to improve the mechanical properties of rock mass. But, the study of ground improvement by greeting is rare especially in jointed rock mass. In this study, joint compression test and direct shear test were performed on pure rock joint and cement milk grouted rock joint to examine the grouting effect on the property of rock joint. In the pure rock joint compression test, joint closure varied non-linearly with normal stress. But after cement milk grouting, the normal deformation characteristics of the joint was linear at the low normal stress level. As normal stress increased. deformation of the sample rapidly increased due to the stress concentration at the joint asperities. Peak shear strength of the grouted joint in low normal stress was higher than that of non-grouted joint due to the cohesion, decreased exponetially as the grout thickness increased. Thus after cement milk grouting, the failure envelope modified to a curve that has cohesion due to grout material hydration with decreased friction angle. Shear stiffness and peak dilation angle of the grouted joint decreased as the grout thickness increased. The peak shear strength from the direct shear test on grouted rock joint was represented by an empirical equation as a fuction of grout thickness and roughness mean amplitude.