• 한국해안·해양공학회논문집
• /
• 제21권2호
• /
• pp.154-163
• /
• 2009

해안에서 입사파향은 일반적으로 실측 파랑자료로부터 생성한 파향 스펙트럼 분석을 통하여 구하지만, 파향의 실측기법은 현장 계기설치시 많은 인력과 비용이 소요되기 때문에 전 쇄파지역에 걸쳐 입사파향을 관측하기에는 어려움이 따른다. 이러한 이유로, 본 연구는 해안 디지털 비디오 자료에 나타나는 입사파의 파봉선을 이용하여 쇄파지역에서 입사파의 변화를 관측하는 기술을 제안한다. 파봉선은 이미지 상에서 선인식 기법을 이용하여 이미지 강도가 큰 픽셀들을 추적해 나감으로써 추출한다. 입사파향은 추출된 파봉선의 일차미분값, 즉, 실제 평면좌표 공간에서 파봉선의 기울기를 계산하여 구한다. 비디오 자료로부터 입사파향의 측정결과는 실측 파랑자료의 파향 스펙트럼으로부터 구한 파향 계산결과와 비교적 잘 일치한다.

• 지역연구
• /
• 제14권1호
• /
• pp.91-107
• /
• 1998

Waste disposal problem is one of the most important social welfare indicators in urban area, because the volume of waste generated from urban area is remarkable. So far most waste of Seoul has been disposed at landfills. However, this landifill disposal method is confronted with several difficulties in recent. As public concern on environmental problem increases and autonomy system is settled down, local community people of the landfills refuse to receive the waste produced other places any more. It brought reginal confliction problem between waste sending and receiving by refusing to accept waste from certain region. Furthermore, it is difficult to find another place to fill up the waste, while the existing landfiis is reached at the limit in the near future. In terms of environmental aspects landfill method is not the best way to dispose waste. It contaminates the soil and ground/underground water by leaking water containing many serious pollutants as well as offensive oder. In terms of equity, this waste disposal method is not fair. Environmental pollution causes damage to residence near to the landfills, while the waste produced other places. In order to satisfy the equity aspect, the waste generated a region should be disposed within the region. Incineration of Waste has been provided as the alternative. Government plans to construct waste incinerator in every anatomy, so the waste produced by local community is disposed within their local autonomous area. However, the location decision is not easy, since waste incinerator is one of the facilities to the community people. We can not apply the existing location models for this problem, because they show strong NIMBY phenomenon for the location. The location of waste incinerator should be determined very carefully with consideration of various location factors and criteria. This study proposes a methodology for determining the location of the waste incinerators by utilizing GIS, which is a power research tool for location decision where various geographical factors related. We drive the location factors which should be considered in the determination of waste incinerators. They involve environmental, socio-economic, and institutional factors. In first, we eliminate the area which is located within the environmental location criteria such as slope, fault line, distance to river, and then eliminate ares which is conflict with the social and institutional criteria.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.232-236
• /
• 2000

Multi-regression statistical analyses were applied for the water quality data of shallow alluvial ground water (n = 47) collected from the Youngdeok area, in order to quantitatively generalize the natural (non-anthropogenic) causes of regional water quality variation. Seven samples having the high contamination index ( $C_{a}$ > 3) reflect the striong effects by anthropogenic activity. Most of the alluvial groundwaters have acquired their quality primarily due to the dissolution of carbonate minerals. The results of multi-regression analysis show that chlorine is mainly derived from seawater effect. Sulfur isotopic compositions of dissolved sulfur and the S $O_4$/Cl ratio also enable us to discriminate the samples (n = 18) which are affected by atmospheric input of marine aerosol (sea-spray) and also by mixing between freshwater and seawater. Hydrogen and oxygen isotope data of the samples collected lie close to the local meteoric water line obtained from nearby Pohang city but has lower slope (5.45) on the $\delta$D-$^{18}$ O plot, indicating that alluvial groundwater was recharged from infiltrated meteoric water which has undergone some degree of kinetic evaporation. The estimated initial isotopic composition of the recharged water ($\delta$D = -74.8$^{0}$ /$_{00}$, $\delta$$^{18}$ O = -10.8$^{[-1000]}$ /$_{[-1000]}$ ) suggests that the alluvial ground water recharge largely occurs during summer storm events.s.s.

• 대한수학교육학회지:학교수학
• /
• 제18권4호
• /
• pp.881-901
• /
• 2016

본 연구는 '시간, 거리, 속력'의 관계에 대한 학생들의 인식과 표현을 교수실험을 통하여 세밀하게 관찰한 연구이다. 이 과정에서 학생들의 '시간, 거리, 속력'의 관계에 대한 인식의 변화가 드러났으며, 학생들은 평균속력에 대하여 거리함수에서 구간의 양 끝점을 잇는 선분의 기울기라는 관점으로 인식하는 것 외에도 속력함수에서 사각형의 높이로 인식하여 '시간, 거리, 속력'을 이해하고 있음을 보여주었다. 이 과정에서 '거리=시간${\times}$속력'의 관계를 '거리=시간${\times}$평균속력'으로 확장하는 장면을 드러내었다. 본 연구는 제한된 소수 학생을 대상으로 교수실험을 진행하였지만, 학생들의 '시간, 거리, 속력'의 관계에 대한 인식과 표현의 변화 과정에 대한 관찰을 통하여 여러 시사점을 제시하였다. 이러한 연구 결과가 추후 미적분 학습 모델 구성을 위한 다양한 연구의 시발점이 되기를 기대해본다.

• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.989-996
• /
• 2008

The purpose of this study is to provide the basic knowledge for the pattern development of a flared skirt. Two flat pattern (FP) methods, the concentric circle method and the corrected concentric circle method, and a draping were used for pattern making. Using these patterns, skirts were made with lengthwise grain in the centerline. The influence of pattern making method on the silhouette of the flared skirt was evaluated by the hemlines formed at the skirt worn in a dress form. Moreover, the combined influence of pattern making method and cutting direction on the silhouette of the flared skirt was examined with the draping pattern (DP) skirt and a FP skirt with $45^{\circ}$ bias grain in the centerline. The DP skirt had more uniform nodes and formed a stable wave form than the FP skirts throughout the whole hemlines. The number of nodes was reduced with lining in the two FP skirts, whereas the number of nodes was not changed in the DP skirt. The unit wave form of all the skirts by three patterns showed long loop form, and the slope angles of the unit wave form of the two FP skirts were higher than that of the DP skirt. The silhouette of the flared skirt was highly influenced by the shape of the waist circumference line in patterns. The DP skirt with lengthwise grain in the centerline showed good silhouette with uniform nodes and high marking efficiency, compared to the FP skirt with $45^{\circ}$ bias grain in the centerline.

• 한국측량학회지
• /
• 제30권6_1호
• /
• pp.529-538
• /
• 2012

다중선형 회귀분석에 의하여 도출된 알고리즘을 이용하여 필터링 기법을 제시하였고, 제시된 기법을 이용하여 실제 사면지형을 지상 라이다로 스캔하여 취득된 원시자료에 대하여 필터링을 수행한 결과를 분석하였다. 그 결과 필터링의 정확도를 높이기 위하여 굴곡사면지형의 지성선을 기준으로 관측지역을 두 지역으로 분할하여 필터링을 적용하였을 경우가 사면을 분할하지 않고 필터링을 적용하였을 경우 보다 필터링 정확도가 8.73% 높아진 것으로 나타났다. 또한 굴곡사면 지형에서 사면을 분할하여 복합 필터링을 적용한 경우 전역 필터링이나 지역 필터링만 수행했을 때보다 약 5~7% 정확도가 높아진 것으로 보아 사면에 굴곡이 존재하여 경사가 일정하지 않은 경우 사면을 분할하여 복합 필터링을 수행하는 것이 더 효과적이라고 판단된다.

• 한국농공학회논문집
• /
• 제50권5호
• /
• pp.3-15
• /
• 2008

This study aims to simulate the 3 dimensional (3D) model of Keum-man connection canal using geographic information system (GIS) as well as considering design in viewpoint of engineering. The canal connects from Keumkang to Mangyungkang in order to supply fresh water into Saemankeum lake. This study used 3 dimensional spatial planning model (3DSPLAM) process to generate the 3D model, which has not only several planning layers in actual process, but also their corresponding layers in modeling process to simulate 3D space of rural villages. The discharge of the canal is $20m^3/s$ on slope of 1/28,400 in the canal length of 14.2km, which consists of pipe line and open channel. This study surveyed the route of the canal and its surrounding environment for facilities to make images in the 3D graphic model. Besides, the present study developed data set in GIS for geogrphical surface modeling as well as parameters in hydraulic analysis for water surface profile on the canal using HEC-RAS model. From the data set constructed, this study performed analysis of water surface profile with HEC-RAS, generation of digital elevation model (DEM) and 3D objects, design of the canal section and route on DEM in AutoCAD, and 3D canal model and its surrounding 3D space in 3DMAX with virtual reality. The study result showed that the process making 3D canal model tried in this study is very useful to generate computer graphic model with the designed canal on the surface of DEM. The generated 3D canal can be used to assist decision support for the canal policy.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.255-263
• /
• 2013

Purpose: It is not easy to drive a rice-transplanter avoiding underlapped or overlapped transplanting in paddy fields. An automated guidance system for the riding-type rice-transplanter would be necessary to operate the rice-transplanter autonomously or to assist the beginning drivers as a driving aid. Methods: A prototype of guidance system was composed of embedded computers, RTK-GPS, and a power-steering mechanism. Two Kalman filters were adopted to overcome sparse positioning data (1 Hz) from the RTK-GPS. A global Kalman filter estimated the posture of rice-transplanter every one second, and a local Kalman filter calculated the posture from every new estimation of the global Kalman filter with an interval of 200 ms. A PID controller was applied to the row-following mode control. A control method of U-turning mode was developed as well. A stepping motor with a reduction gear set was used to rotate the shaft of steering wheel. Results: Test trials for U-turning and row-following modes were done in a paddy field after some parameters have been tuned at the ground speed range of 0.3 ~ 1.2 m/s. The minimum RMS error of offset was 3.13 cm at the ground speed of 0.3 m/s while the maximum RMS error was 13.01 cm at 1.2 m/s. The offset RMS error tended to increase as the ground speed increased. The target point distance, LT also affected the system performance and PID controller parameters should be adjusted on different ground speeds. Conclusions: A target angle-based PID controller plus stationary steering angle controller made it possible for the rice-transplanter to steer autonomously by following a reference line accurately and even on U-turning mode. However, as condition in paddy fields is very complicated, the system should control the ground speed that prevents it from deviating too much due to ditch and slope.

• 한국지능시스템학회논문지
• /
• 제15권3호
• /
• pp.294-299
• /
• 2005

본 논문에서는 선형적으로 흔합된 영상신호에 잡음이 첨가된 영상을 대상으로 뉴우턴법과 할선법의 고정점 알고리즘 독립성분분석을 적용하여 분리성능을 비교${\cdot}$검토하였다. 여기서 뉴우턴법의 고정점 알고리즘은 기울기 변화에 따른 속성을 이용하며, 할선법의 고정점 알고리즘은 접선의 변화를 이용하는 속성을 가진다. 실험에 이용된 신호는 2개의 $512\times512$ 픽셀 2차원 영상이며, 가우스 분포와 라플라스 분포의 잡음을 각각 이용하였다. 실험 결과, 원 영상을 분리하는 시간에서는 뉴우턴법의 고정점 알고리즘 독립성분분석이 할선법의 고정점 알고리즘 독립성분분석보다 보다 빠르며, 복원성능에서는 할선법의 고정점 알고리즘 독립성분분석이 더욱 우수한 특성이 있음을 알 수 있었다. 한편, 잡음이 많이 첨가될수록 뉴우턴법의 FP-ICA와 할선법의 FP-ICA사이의 추출속도와 분리성능은 더욱 더 큰 차이가 있음도 알 수 있었다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.46-53
• /
• 2008

Recently, the synthetic material stern tube bush has been applied by ship owner's requirement because the synthetic material has a merit. That is to say, when stern tube seal is damaged and sea water comes into stern tube, it can work without problem because of water lubricating property. However, the material also has a demerit of temperature rise problem when some factors meets on synthetic material, for example, not sufficient lubrication oil supply and not proper shaft alignment and so on. As known in the world, the RAILKO bush is rampant for synthetic material by some ship owner because of the above mentioned reason. However, the bush has several accidents on large container vessel. Unfortunately or fortunately our yard has a chance to apply the RAILKO bush owing to requirement of specific ship owner. Therefore, it is much more required to approach the accurate shaft alignment analysis. In line with this reason, we had a shaft alignment calculation considering hull deformation and hull flexibility (hull stiffness). Also, in the calculation, we had considered dynamic condition which is reflected he propeller thrust forces and moments and oil film stiffness on the shaft alignment calculation. According to he shaft alignment calculation, bearing slope was applied on the tern tube bush and was measured. The RAILKO bush should be applied the running in procedure according to maker's recommendation for performing the oil film on the bush surface. Finally, the vessels were delivered successfully without any problem with AILKO bush as shown on his paper.