Abstract
By using an algorithm derived by a multiple linear regression analysis, a technique for filtering was developed; and by using the developed technique, the results of conducting filtering of the raw data collected via scanning with a terrestrial LiDAR the actual sloped terrain was analyzed. As such, when filtering was applied by dividing the observation areas into two areas with the topographical line as a reference in order to improve the filtering accuracy, it was seen that the filtering accuracy improved by about 8.73% as compared to when filtering was applied without dividing the observation area. In addition, considering the fact that the accuracy improved by 5~7% when the sloped sides of a multicurvature topography were divided and a complex filtering applied as compared to when filtering was applied for the entire area or by regions, it can be asserted that the accuracy was higher when a complex filtering was conducted by dividing the sloped areas where the slope is not constant due to the multi-curvature of topography.
다중선형 회귀분석에 의하여 도출된 알고리즘을 이용하여 필터링 기법을 제시하였고, 제시된 기법을 이용하여 실제 사면지형을 지상 라이다로 스캔하여 취득된 원시자료에 대하여 필터링을 수행한 결과를 분석하였다. 그 결과 필터링의 정확도를 높이기 위하여 굴곡사면지형의 지성선을 기준으로 관측지역을 두 지역으로 분할하여 필터링을 적용하였을 경우가 사면을 분할하지 않고 필터링을 적용하였을 경우 보다 필터링 정확도가 8.73% 높아진 것으로 나타났다. 또한 굴곡사면 지형에서 사면을 분할하여 복합 필터링을 적용한 경우 전역 필터링이나 지역 필터링만 수행했을 때보다 약 5~7% 정확도가 높아진 것으로 보아 사면에 굴곡이 존재하여 경사가 일정하지 않은 경우 사면을 분할하여 복합 필터링을 수행하는 것이 더 효과적이라고 판단된다.
