• Journal of Mechanical Science and Technology
• /
• 제15권9호
• /
• pp.1292-1301
• /
• 2001

The mean-line method using empirical models is the most practical method of predicting off-design performance. To gain insight into the empirical models, the influence of empirical models on the performance prediction results is investigated. We found that, in the two-zone model, the secondary flow mass fraction has a considerable effect at high mass flow-rates on the performance prediction curves. In the TEIS model, the first element changes the slope of the performance curves as well as the stable operating range. The second element makes the performance curves move up and down as it increases or decreases. It is also discovered that the slip factor affects pressure ratio, but it has little effect on efficiency. Finally, this study reveals that the skin friction coefficient has significant effect on both the pressure ratio curve and the efficiency curve. These results show the limitations of the present empirical models, and more resonable empirical models are reeded.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2012년도 춘계학술발표회 초록집
• /
• pp.206-209
• /
• 2012

산불에 영향을 미치는 인자는 일반적으로 산림 연료와 기상 그리고 지형인자로 구분할 수 있다. 이중 지형인자는 경사와 사면의 방향 그리고 해발고, 사면의 길이 등 여러 조건들이 복합적으로 이루어진 산의 형세를 이룬다. 지형 조건 중 경사는 산불 발생 후 확산속도에 영향을 주며 사면의 방향은 태양복사에너지 일사량에 따른 연료의 건조와 연료의 온도 등에 영향을 줌으로써 산불의 발생과 확산에 영향을 준다. 특히 산불이 시작되는 이른 봄철에는 강설 후 사면향에 따라 적설지역과 눈이 녹아 건조한 지역이 사면의 향에 따라 큰 차이를 나타내고 있으며 이로 인해 산불위험 예보시에도 사면향에 따른 산불발생위험을 달리 적용해야 할 필요성이 있다. 이에 본 연구에서는 사면의 방향에 따른 산불위험성을 평가하기 위해 먼저 태양복사에너지의 일사량 분석을 실시하였고 산불사례조사를 통해 사면의 방향에 따라 산불발생 위험과 피해면적을 비교, 분석하였다. 그 결과 태양복사에너지 일사량이 가장 많은 사면의 향인 남사면을 중심으로 산불발생이 높은 것으로 분석되었다.

• 한국광학회지
• /
• 제4권3호
• /
• pp.289-293
• /
• 1993

파장 792 nm의 AlGaAs 레이저 다이오드로 펌핑되는 Nd:YLF 레이저를 제작하여 펌핑세기와 펌핑빔의 파장에 대한 출력특성을 조사하였다. Brewster 각으로 되어있는 Nd:YLF봉에서 발생하는 비점수차를 보정하기 위하여 공진기 구조를 접힌형태로 하였다. 연속 출력 2.6Watt로 펌핑하였을 때 발진파장 1053 nm에서 최대 출력 1.1Watt를 얻었으며, 이때 전체효율이 39% 였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.203-210
• /
• 2004

The average temperatures by the land cover class, by the elevation extent, by the slope and by the aspect have been calculated using multitemporal Landsat TM band 6 and DEM. For this, the TM band 6 data from October 21, 1985, June 2, 1992, September 1, 1996, May 7, 2000 and the 28.5m x 28.5m grid elevation data of Seoul have been used. From the varying curve of the average land surface temperature by the elevation extent, the presence of the atmospheric inversion phenomenon and the scope of the inversion layer can be inferred. Especially, the average land surface temperature by the aspect can be effective for deciding a road line. For these reasons, it is expected that temperature estimation using remote sensing data shall be effective for the survey of heat damage, environmental temperature monitoring, and urban and environmental Planning usage.

• Agricultural and Biosystems Engineering
• /
• 제2권1호
• /
• pp.15-23
• /
• 2001

On the assumption that the voices of the cows are produced by the linear prediction filter, we characterized the cows’voices. The order of this filter was determined by examining the voice characteristics both in time and frequency domains. The proposed order of the linear prediction filter is 15 for modeling voice production of the cow. The characteristics of the amplitude envelope of the voice signal was investigated by analyzing the sequence of the short time variance both in time and frequency domains, and the new parameters were defined. One of the coefficients o the linear prediction filter generating the voice signal, the fundamental frequency, the slope of the straight line regressed from the log-log spectra of the short time variance and the coefficients of the linear prediction filter generating the sequence of the short time variance of the voice signal can differentiate the two cows.

• 한국공간구조학회논문집
• /
• 제12권4호
• /
• pp.57-69
• /
• 2012

This study investigated the behaviors of the gabled hyperbolic paraboloid shell structure subjected to differential settlement and the horizontal displacement due to the elongation of tie rod/beam on supports. Two types of shell structure with different roof slopes are used in study; conventional type which has perimeter beams around the shell panel, and simple type which removes the edge beams along the slab edge line. The effect of the removal of edge beam under vertical or horizontal displacement on supports, and the roof slope was compared using the finite element analysis.

• 설비공학논문집
• /
• 제3권1호
• /
• pp.34-41
• /
• 1991

The effect of flow conditions on flow measurement is difficult to identify from the inherent characteristics of the flowmeters and flow standard system. A new experimental approach has been attempted to detect the turbine meter error due to inlet flow conditions. In this try not only the design of the turbine meter package but also the data analysis method was altered. It was found that k factor slope of the turbine meter responds to the change of flow conditions in the test line with higher sensitivity than the degree of the data scattering. The flow standard system of $0.1m^3/s$ was chosen for the investigation. The systematic and random error of the system were less than ${\pm}0.08%$ and ${\pm}0.13%$ respectively.

• Journal of Information Processing Systems
• /
• 제15권6호
• /
• pp.1392-1405
• /
• 2019

The cathode voltage of aluminum electrolytic cell is relatively stable under normal conditions and fluctuates greatly when it has an anomaly. In order to detect the abnormal range of cathode voltage, an anomaly detection algorithm based on sliding window was proposed. The algorithm combines the time series segmentation linear representation method and the k-nearest neighbor local anomaly detection algorithm, which is more efficient than the direct detection of the original sequence. The algorithm first segments the cathode voltage time series, then calculates the length, the slope, and the mean of each line segment pattern, and maps them into a set of spatial objects. And then the local anomaly detection algorithm is used to detect abnormal patterns according to the local anomaly factor and the pattern length. The experimental results showed that the algorithm can effectively detect the abnormal range of cathode voltage.

• Journal of the Korean Data and Information Science Society
• /
• 제15권1호
• /
• pp.251-261
• /
• 2004

The paper focuses primarily on the standard linear multiple regression model where the parameter of interest is a ratio of two regression coefficients. The general model includes the calibration model, the Fieller-Creasy problem, slope-ratio assays, parallel-line assays, and bioequivalence. We provide an orthogonal transformation (cf. Cox and Reid (1987)) of the original parameter vector. Also, we give some remarks on the difficulties associated with likelihood based confidence interval.

• Journal of electromagnetic engineering and science
• /
• 제11권1호
• /
• pp.51-55
• /
• 2011

Electromagnetic fields, radiated from an intestine-ingested source and propagated through an inhomogeneous human body model, are computed with the finite-difference time-domain (FDTD) method. The calculated results obtained at some receiving points vertically placed according to the abdomen of the human body model show unusual dip patterns in the frequency domain. The frequency of this unusual dip varies according to the location of the receiving points. Thus, the relationship between the frequency of the unusual dip and the incident angle of the line-of-sight is analyzed. The effect of the location of an ingested source on the above relationship is also investigated. The slope of the approximately linear relationship is affected by the location of the ingested source.