• 제목/요약/키워드: limits

검색결과 7,031건 처리시간 0.035초

공정의 열화를 고려한 경제적 관리한계 결정 (A determination of economic control limits considering process deterioration)

  • 심윤보;김성집
    • 산업경영시스템학회지
    • /
    • 제21권45호
    • /
    • pp.237-246
    • /
    • 1998
  • In most statistical process control(SPC), control charts are used in which samples are taken and a suitable statistic is determined and plotted. In these control charts, control limits, ${\mu}{\pm}textsc{k{\sigma}}$, from which a decision is made are mostly ${\mu}{\pm}3{\sigma}$ and current literature in control charts are mainly concerned with detecting a shift in the mean. Therefore, when $\sigma$ is increased considerably after a long time, using control limits set at the first time causes a great deal of economic loss. In this paper the solutions to determine new control limits which maximizes the profit per unit produced and reduce $\sigma$ to economically optimal level for a certain cost when $\sigma$ is increased due to process deterioration are proposed. By applying new control limits, $\alpha$ error decreases considerably compared to apply initial control limits when $\sigma$ is increased due to process deterioration. Therefore, false alarm investigation cost drops down to the level of initial a error. And also this solution provides useful information regarding replacement of a process when the process is reviewed regularly.

  • PDF

신체 부위별 냉각허용한계온도에 관한 연구 (Permissible Safety Limits in Local Cooling Focused on the Parts of Human Body)

  • 황경숙;최정화;김경란
    • 한국의류학회지
    • /
    • 제31권1호
    • /
    • pp.119-130
    • /
    • 2007
  • The objects of this study were to investigate responses and peculiarity during local cooling by parts of the human body and to show permissible safety limits without injurious to his health because of excessive cooling when he works hot environments. It were measured rectal temperature, skin temperature, heart rate, total body weight loss, local sweat in back and thigh, clothing microclimate and subjective sensation on 8 subjects and cooling parts were head, neck, chest, abdomen, back, waist, hip, upper arm, forearm, hand, thigh, calf and foot. According to above-mentioned the first experiment, we chose permissible safety limits by parts of the human body for one hour. In the second experiment, it was showed permissible safety limits by parts which examined their safety about health through 4 hours cooling test on 3 subjects. The results are as follows: 1. As a result of the first experiment, we chose permissible safety limits by parts, as follows, head $25^{\circ}C$, neck $20^{\circ}C$, chest $27^{\circ}C$, abdomen $25^{\circ}C$, back $20^{\circ}C$, waist $20^{\circ}C$, upper arm $20^{\circ}C$, forearm $20^{\circ}C$, hand $23^{\circ}C$, thigh $20^{\circ}C$, calf $20^{\circ}C$ and foot $23^{\circ}C$ in $37^{\circ}C$, 50%R.H. environment for 1 hour. 2. As a result of the second experiment, cooling on these safety limits temperatures except chest didn't have a bad effect on health. So it was proved that right permissible safety limits of chest was $28^{\circ}C$. From these results, it has been suggested that skin temperature didn't fall below permissible safety limits when human body was to be cool by parts.

Genetic algorithm-based geometric and reinforcement limits for cost effective design of RC cantilever retaining walls

  • Mansoor Shakeel;Rizwan Azam;Muhammad R. Riaz
    • Structural Engineering and Mechanics
    • /
    • 제86권3호
    • /
    • pp.337-348
    • /
    • 2023
  • The optimization of reinforced concrete (RC) cantilever retaining walls is a complex problem and requires the use of advanced techniques like metaheuristic algorithms. For this purpose, an optimization model must first be developed, which involves mathematical complications, multidisciplinary knowledge, and programming skills. This task has proven to be too arduous and has halted the mainstream acceptance of optimization. Therefore, it is necessary to unravel the complications of optimization into an easily applicable form. Currently, the most commonly used method for designing retaining walls is by following the proportioning limits provided by the ACI handbook. However, these limits, derived manually, are not verified by any optimization technique. There is a need to validate or modify these limits, using optimization algorithms to consider them as optimal limits. Therefore, this study aims to propose updated proportioning limits for the economical design of a RC cantilever retaining wall through a comprehensive parametric investigation using the genetic algorithm (GA). Multiple simulations are run to examine various design parameters, and trends are drawn to determine effective ranges. The optimal limits are derived for 5 geometric and 3 reinforcement variables and validated by comparison with their predecessor, ACI's preliminary proportioning limits. The results indicate close proximity between the optimized and code-provided ranges; however, the use of optimal limits can lead to additional cost optimization. Modifications to achieve further optimization are also discussed. Besides the geometric variables, other design parameters not covered by the ACI building code, like reinforcement ratios, bar diameters, and material strengths, and their effects on cost optimization, are also discussed. The findings of this investigation can be used by experienced engineers to refine their designs, without delving into the complexities of optimization.

포아송 분포를 가정한 Wafer 수준 Statistical Bin Limits 결정방법과 표본크기 효과에 대한 평가 (Methods and Sample Size Effect Evaluation for Wafer Level Statistical Bin Limits Determination with Poisson Distributions)

  • 박성민;김영식
    • 산업공학
    • /
    • 제17권1호
    • /
    • pp.1-12
    • /
    • 2004
  • In a modern semiconductor device manufacturing industry, statistical bin limits on wafer level test bin data are used for minimizing value added to defective product as well as protecting end customers from potential quality and reliability excursion. Most wafer level test bin data show skewed distributions. By Monte Carlo simulation, this paper evaluates methods and sample size effect regarding determination of statistical bin limits. In the simulation, it is assumed that wafer level test bin data follow the Poisson distribution. Hence, typical shapes of the data distribution can be specified in terms of the distribution's parameter. This study examines three different methods; 1) percentile based methodology; 2) data transformation; and 3) Poisson model fitting. The mean square error is adopted as a performance measure for each simulation scenario. Then, a case study is presented. Results show that the percentile and transformation based methods give more stable statistical bin limits associated with the real dataset. However, with highly skewed distributions, the transformation based method should be used with caution in determining statistical bin limits. When the data are well fitted to a certain probability distribution, the model fitting approach can be used in the determination. As for the sample size effect, the mean square error seems to reduce exponentially according to the sample size.

재해시 학교시설의 환경적 지각 정도에 따른 학생의 활동제한의 분석: 수도권 고등학교를 중심으로 (The Analysis of Student's Acts within Limits When Encountering Natural Disasters caused by the Degree of Environmental Sensibility of School Facilities according to Natural Disaster Damage: Focusing on High-schools in Seoul Metropolitan Area)

  • 민창기
    • 교육시설
    • /
    • 제13권4호
    • /
    • pp.31-42
    • /
    • 2006
  • This study is about an analysis of the relation between the degree of cognition of student's acts within limits when coping with several types of disaster and the degree of cognition of damage by disasters in the method of multiple regression analysis. The dependent variable is the degree of cognition of student's acts within limits and the independent variable is the degree of cognition of damage by disasters such as heavy snow, typhoon, heavy rain, heat, and yellow sand. A survey of graduates of metropolitan area high-schools has found that there are no difference between girls and boys of the degree of cognition of student's acts within limits when coping with disasters. This study finds that the independent variable, which are playgrounds, animals and plants, streets and roads, altitude and incline, gives positive effect to the degree of cognition of student's acts within limits when coping with typhoon or heavy rain in order. The study also finds that the degree of cognition of student's acts within limits when coping with heavy snow is affected positively by streets and roads, playgrounds, altitude and incline in order. It also shows that there are factors that has an effect to the degree of cognition of student's acts within limits when coping with yellow sand and heat. This study proposes suggestions to facility plans based on these facts discovered.

아스팔트 콘크리트 포장구조체의 제한교통하중에 관한 연구 (A Study on the Axle Load Limits of Asphalt Concrete Pavements)

  • 김수일;최준성
    • 대한토목학회논문집
    • /
    • 제12권2호
    • /
    • pp.67-76
    • /
    • 1992
  • 본 연구에서는 아스팔트 콘크리트 포장구조체의 제한교통하중 산정과정을 제안하였다. 제한교통하중은 아스팔트 콘크리트 포장구조체의 파괴기준이 되는 노상상단의 연직변형율과 아스팔트 안정처리 기층 최하단에서의 인장변형용을 포장구조체 모델에 따른 바퀴의 영향선을 고려하여 산정한 후 포장 구조체의 변형율과 축하중과의 관계에 설계한계치를 적용하여 산정한다. 본 연구에서는 우리나라 고속도로중 경부선, 경인선, 영동선 확장구간 모델의 제한교통하중을 산정하기 위하여 바퀴의 영향선을 고려하여 변형율을 산정하였다. 제한교통하중의 기준은 세계 여러 관계기관에서 제안한 파괴기준식으로부터 설계한계치를 산정하여 이용하였다. 축구성(단축, 탄뎀축, 트라이뎀축)에 따른 제한교통하중을 분석한 결과 제한교통하중은 포장구조체의 두께와 밀접한 관계가 있음을 알 수 있었다. 또한 탄뎀축과 트라이뎀축의 제한교통하중은 단축의 제한교통하중에 축 수를 곱하여 구한 값과 유사함을 알 수 있었다. 따라서 본 연구에서는 제한교통하중을 단축기준의 제한교통하중으로 제안하였다. 단축기준의 제한교통하중은 우리나라 고속도로중 경부선, 경인선, 영동선 확장구간을 대상으로 해석한 결과, 인장변형율에 의한 제한교통하중이 연직변형율에 의한 제한교통하중보다 포장구조체에 미치는 영향이 더 큼을 알 수 있었다.

  • PDF

A SUFFICIENT CONDITION FOR THE INTEGRABILITY OF REES-STANOJEVIĆ SUM

  • Ram, Babu
    • Kyungpook Mathematical Journal
    • /
    • 제19권2호
    • /
    • pp.257-260
    • /
    • 1979
  • We show that the condition S of Sidon is sufficient for the integrability of the limit of Rees-$Stanojevi{\acute{c}$ cosine sums $g_n(x)={\frac{1}{2}}{\limits\sum^{n}_{k=0}}{\Delta}a_k+{\limits\sum^{n}_{k=1}}{\limits\sum^{n}_{j=k}}{\Delta}a_j\;cos\;kx$.

  • PDF

THE APPROXIMATION FOR FUNCTIONAL EQUATION ORIGINATING FROM A CUBIC FUNCTIO

  • Lee, Eun-Hwi;Chang, Ick-Soon;Jung, Yong-Soo
    • 호남수학학술지
    • /
    • 제30권2호
    • /
    • pp.233-246
    • /
    • 2008
  • In this paper, we obtain the general solution of the following cubic type functional equation and establish the stability of this equation (0.1) $kf({{\sum}\limits^{n-1}_{j=1}}x_j+kx_n)+kf({{\sum}\limits^{n-1}_{j=1}}x_j-kx_n)+2{{\sum}\limits^{n-1}_{j=1}}f(kx_j)+(k^3-1)(n-1)[f(x_1)+f(-x_1)]=2kf({\sum\limits^{n-1}_{j=1}}x_j)=K^3{\sum\limits^{n-1}_{j=1}[f(x_j+x_n)+f(x_j-x_n)]$ for any integers k and n with k ${\geq}$ 2 and n ${\geq}$ 3.

Performance Limits of Three-Phase Self-Excited Induction Generator (SEIG) as a Stand Alone DER

  • Slimene, Marwa Ben;Khlifi, Mohamed Arbi
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권1호
    • /
    • pp.145-150
    • /
    • 2017
  • This paper present a unified method of steady state performance analysis and limits characteristics of an autonomous three-phase self-excited induction generator (SEIG) driven by a wind turbine under different types of loads and speeds. The proposed method is based on a new mathematical function to solve for the real and imaginary components of the complex equation of the mathematical model. Performances limits, regulation and characteristics of different configurations will be thoroughly examined and compared. The proposed system will be modeled and simulated and the performance limits characteristics will be compared with variable speed and variable capacity.