• Journal of the Korean Data and Information Science Society
• /
• v.16 no.2
• /
• pp.457-465
• /
• 2005

We consider the estimation of parameter in the exponential model in the case that the number of replacements of failed items is limited. And the desirable number of replacements to give the similar effect as unlimited case in terms of the mean square errors is proposed.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.3
• /
• pp.445-451
• /
• 2013

We consider the estimators for the parameters of the exponential model with limited replacements under the type I censoring scheme. Also, we propose the desirable number of replacements to provide the similar effects in terms of the mean square errors.

• Transactions of Materials Processing
• /
• v.25 no.3
• /
• pp.155-160
• /
• 2016

Magnesium(Mg) alloys have been evaluated as replacements for steel or aluminum parts in the automobile industry because of the fuel economy they can provide through reducing weight. The application of Mg alloys has been limited due to its low formability at room temperature, which results from a small number of active slip systems. In the current study, an extruded TAZ711(Mg-7Sn-1Al-1Zn) alloy was warm forged into an automotive control arm to evaluate its formability at various forging temperature. Warm forging was conducted at temperatures of 200, 250, 350 and 450℃. Static strength evaluation was performed on the as-forged specimen at 250℃. The results showed good static strength.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.815-824
• /
• 2013

Pneumatic exciters can be good replacements of electrodynamic, piezoelectric and hydraulic exciters owing to simple structure and large exciting force. One problem to be solved is a slow response caused by compressibility of air. Desirable frequency response characteristics of exciter are constant magnitude and zero degree phase, because users want no time delay between input signal and output force. For this reason, frequency range of pneumatic exciters is limited about 0~1 Hz. Therefore, expansion of frequency range is an important issue when designing the pneumatic exciter. In this paper, the pneumatic exciter which has same structure with active pneumatic isolator is dealt with. The dynamic characteristics are presented, and its limitation of expanding frequency range is shown based on analytical studies. Then the pneumatic exciter with dual-chamber is suggested to overcome this problem. Based on simulation study, a design method is presented.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.10
• /
• pp.909-919
• /
• 2013

Pneumatic exciters can be good replacements of electrodynamic, piezoelectric and hydraulic exciters owing to simple structure and large exciting force. One problem to be solved is a slow response caused by compressibility of air. Desirable frequency response characteristics of exciter are constant magnitude and zero degree phase, because users want no time delay between input signal and output force. For this reason, frequency range of pneumatic exciters is limited about 0~1 Hz. Therefore, expansion of frequency range is an important issue when designing the pneumatic exciter. In this paper, the pneumatic exciter which has same structure with active pneumatic isolator is dealt with. The dynamic characteristics are presented, and its limitation of expanding frequency range is shown based on analytical studies. Then the pneumatic exciter with dual-chamber is suggested to overcome this problem. Based on simulation study, a design method is presented.

• Journal of the military operations research society of Korea
• /
• v.17 no.1
• /
• pp.61-83
• /
• 1991

There has been a great deal of research dealing with the optimal replacement of stochastically deteriorating equipment and research in queueing systems with a finite calling population. However. there has been a lack of research which combines these two areas to deal with optimal replacement for a fixed number of machines and a limited number of repairmen. In this research, an optimal control policy for replacement involving two machines and one repairman is developed by investigating a class of age replacement policies in the context of controlling a G/M/1 queueing system with a finite calling population. The control policy to be imposed on this problem is an age-dependent control policy, described by the control limit $t^{\ast}$. The control limit is operational only when the repairman is idle; that is. if both machines are working, as soon as a machine reaches the age $t^{\ast}$ it is taken out of service for replacememt. We obtain the ${\epsilon}$-optimal control age which will minimize the long-run average system cost. An algorithm is developed that is applicable to general failure time distributions and cost functions. The algorithm does not require the condition of unimodality for implementation.

• International Journal of Reliability and Applications
• /
• v.13 no.1
• /
• pp.19-35
• /
• 2012

This paper presents an optimum design of step-stress partially accelerated life test (PALT) plan which allows the test condition to be changed from use to accelerated condition on the occurrence of fixed number of failures. Various life distribution models such as exponential, Weibull, log-logistic, Burr type-Xii, etc have been used in the literature to analyze the PALT data. The need of different life distribution models is necessitated as in the presence of a limited source of data as typically occurs with modern devices having high reliability, the use of correct life distribution model helps in preventing the choice of unnecessary and expensive planned replacements. Truncated distributions arise when sample selection is not possible in some sub-region of sample space. In this paper it is assumed that the lifetimes of the items follow Truncated Logistic distribution truncated at point zero since time to failure of an item cannot be negative. Optimum step-stress PALT plan that finds the optimal proportion of units failed at normal use condition is determined by using the D-optimality criterion. The method developed has been explained using a numerical example. Sensitivity analysis and comparative study have also been carried out.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.677-683
• /
• 2006

If a node stops functioning in an ad-hoc wireless network, routing paths involving the node will also fail, when construction of replacement routes is required. A major cause of node failure is energy exhaustion, and route replacements may in turn lead to successive node failures by making more nodes consume their energy. The result could be performance degradation of networks. Therefore it is important to ensure that nodes with limited remaining energy are not included in route construction from the beginning. In this paper we propose a new routing protocol, which takes residue energy of nodes into account in order to prevent node failures resulting from energy shortage. Our routing protocol examines the smallest value of node residue energy ($E_{m}$) from each of all possible routing paths and selects the path which has the largest value of $E_{m}$. We prove, through simulation, that our routing protocol extends the lifetime of nodes which have limited amount of energy, reducing chances of path replacement. It is also shown that our proposed protocol helps alleviate network performance degradation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.2
• /
• pp.81-91
• /
• 1993

Arthrosis of the temporomandibular joint is defined as a disease of a joint with chief complaint of pain, clicking, limited jaw movements. Generally, most patients with the temporomandibular arthrosis can be treated conservatively with muscle relaxation therapy combined with mandibular repositioning prostheses, followed by occlusal equilibration, restorative dentistry and/or orthodontics, and many other forms of treatment. In case prior nonsurgical treatment proved to be ineffective or the disease is chronic and severe, surgical operation is recommended. For patients with arthrosis of the temporomandibular joint, only discectomy as therapeutic method of the surgical treatment should not be applied and the removed articular disc of the temporomandibular joint should be replaced. Allograft such as Proplast-Teflon, Silastic, etc have been used as replacements of removed articular disc. However, these allograft materials have caused complications such as inflammatory changes, foreign body reactions. As a result, a replacement material which is autogenous, space occupying, easy to harvest and less inflammatory change has been developed. Auricular cartilage with perichondrium satisfies many of these requirements. The apparent advantages of autogenous auricular cartilage as an interpositional graft after a discectomy are as follows, (1) the form of the external ear corresponds to joint morphology, (2) a graft of adequate size can be harvested, (3) the form of the external ear remains unchanged after surgery, (4) the graft can be obtained adjacent to the surgical site, (5) biologically acceptable material is used, (6) the additional expense of allogenic graft is avoided. Because we considered autogenous auricular cartilage as a good replacement material, removed articular disc has been replaced with fresh autogenous auricular cartilage in the case of three patients. The result of the treatment is favorable, and the cases being presented here.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1657-1667
• /
• 2010

Direct-fed microbials (DFM) are dietary supplements that inhibit gastrointestinal infection and provide optimally regulated microbial environments in the digestive tract. As the use of antibiotics in ruminant feeds has been banned, DFM have been emphasized as antimicrobial replacements. Microorganisms that are used in DFM for ruminants may be classified as lactic acid producing bacteria (LAB), lactic acid utilizing bacteria (LUB), or other microorganisms including species of Lactobacillus, Bifidobacterium, Enterococcus, Streptococcus, Bacillus and Propionibacterium, strains of Megasphaera elsdenii and Prevotella bryantii and yeast products containing Saccharomyces and Aspergillus. LAB may have beneficial effects in the intestinal tract and rumen. Both LAB and LUB potentially moderate rumen conditions and improve feed efficiency. Yeast DFM may reduce harmful oxygen, prevent excess lactate production, increase feed digestibility, and improve fermentation in the rumen. DFM may also compete with and inhibit the growth of pathogens, stimulate immune function, and modulate microbial balance in the gastrointestinal tract. LAB may regulate the incidence of diarrhea, and improve weight gain and feed efficiency. LUB improved weight gain in calves. DFM has been reported to improve dry matter intake, milk yield, fat corrected milk yield and milk fat content in mature animals. However, contradictory reports about the effects of DFM, dosages, feeding times and frequencies, strains of DFM, and effects on different animal conditions are available. Cultivation and preparation of ready-to-use strict anaerobes as DFM may be cost-prohibitive, and dosing methods, such as drenching, that are required for anaerobic DFM are unlikely to be acceptable as general on-farm practice. Aero-tolerant rumen microorganisms are limited to only few species, although the potential isolation and utilization of aero-tolerant ruminal strains as DFM has been reported. Spore forming bacteria are characterized by convenience of preparation and effectiveness of DFM delivery to target organs and therefore have been proposed as DFM strains. Recent studies have supported the positive effects of DFM on ruminant performance.