• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.208-209
• /
• 2017

This study analyzed the fluidity and strength properties of mortar containing high volume blast furnace slag by replacement ratio of lightweight fine aggregate for reducing the unit weight of concrete structures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.315-318
• /
• 1999

This paper deals with the relationships between the exotherm temperature and working life of lightweight polyester mortar. Polyester mortars using types of lightweight aggregate compositions are prepared, and tested for exotherm temperature during hardening and working life. It is concluded from the test results that the behavior of exotherm temperature of lightweight polyester mortars is considerably affected by the lightweight aggregate composition. The lightweight polyester mortars using a lightweight aggregate compositeion ES gradually develop an exotherm temperature from 2$0^{\circ}C$, and give a working life. Then the exotherm temperature rises sharply up to a maximum exotherm temperature. The working life of the lightweight polyester mortars shortens with increasing catalyst and accelerator contents. The maximum exotherm temperature of the lightweight polyester mortars rises with increasing catalyst and accelerator contents.

• 한국건설순환자원학회논문집
• /
• 제3권1호
• /
• pp.7-14
• /
• 2015

본 연구의 목적은 건식공정을 통해 생산된 바텀애시를 이용하여 친환경적이고 저렴한 경량콘크리트의 잔골재로 활용하는 것이다. 기존의 습식공정과 비교하여 건식공정은 물에 닿지 않고, 염분이 없으며, 다소 느린 공정으로 완전연소를 통해 미연소탄소성분이 거의 없다. 이러한 건식공정 바텀애시를 경량 모르터용 잔골재로서 타당성을 평가하기 위해 골재의 입형 개선 효과와 최적 입도분포의 두가지 단계로 나누어 실험을 실시하였다. 첫 번째 실험에서 추가적인 마쇄과정을 통해 얻어진 양호한 입형의 바텀애시는 유동성과 강도 측면에서 양호한 결과를 나타내었으며 다소간의 단위용적질량 증가를 보였다. 두 번째 실험에서 다양한 입도를 구성하여 실험을 실시하였고, 그 결과 표준입도에 맞추어진 입도에서 굳지 않은 상태 및 경화상태에서 양호한 성능을 나타내었다. 본 연구의 결과를 통해 차후 건식 공정을 통한 바텀애시의 활용방법이 확대되고, 바텀애시를 경량 잔골재로 활용함으로서 부가가치 상승에 기여할 것으로 예상된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.177-180
• /
• 2012

Korea residential housing generally use wet floor heating system 'Ondol' which consist of insulation cushioning, lightweight foamed concrete, hot water pipe and mortar on top of reinforced concrete slab. Wet floor heating system's installation process is too complicate and difficult to supervise field for continuing assurance quality. Also, this method has a huge impact on the progress of construction because it take a long time to cure finishing mortar and lightweight foamed concrete. Therefore, it is considered a disturbance factor of reduction of construction duration for enhancing competitiveness. In this study, we conducted an experiment about the radiant heat performance and temperature difference on upper panel of rolled dry floor heating systems which is jointly developed by Kolon global and Sumisho Metalex for remodeling housing, studio apartment and the urban-life housing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.717-720
• /
• 2008

This paper, an evaluation of the mechanical property for the backfilling materials of the NATM Composite lining tunnel using the lightweight foamed mortar, relates to the performance of permeability, compressive strength and unit volume weight. Therefore, this study is aimed to prove the three main factor that refered to the above line for development of new tunnel method. As the result of this study, it would be confirmed that the D mix is better than other mixs a side of all tests and its relation that is for the tunnel backfilling materials.

• Computers and Concrete
• /
• 제12권3호
• /
• pp.319-335
• /
• 2013

In this paper, the properties of the cement mortar modified with styrene acrylic ester copolymer were investigated. Expanded vermiculite as lightweight aggregate was used for making the polymer modified mortar test specimens. To study the effect of polymer-cement ratio and vermiculite-cement ratio on various properties, specimens were prepared by varying the polymer-cement and vermiculite-cement ratios. Tests of physical properties such as density, water absorption, thermal conductivity, three-point flexure and compressive tests were made on the specimens. Furthermore, a coupled thermal-structural finite element model of an entire corner wall was modelled in order to study the best material configuration. The wall is composed by a total of 132 bricks of $120{\times}242{\times}54$ size, joined by means of a contact-bonded model. The use of advanced numerical methods allows us to obtain the optimum material properties. Finally, comparisons of polymer-cement and vermiculite-cement ratios on physical properties are given and the most important conclusions are exposed.

• 한국건설순환자원학회지
• /
• 제14권2호
• /
• pp.28-34
• /
• 2019

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.112-113
• /
• 2014

This study was done to resolve the air reduction in mortar when mixed with ERCO. Effects of the water repellent ALC powder due to its particle size and substitution ratio on the cement mortar with ERCO was analyzed. Results showed more water repellent ALC powder ensured more air but did not affect the size of particles. It was determined the compression was caused by more air and water added to achieve the flow. Therefore, substituting with water repellent ALC powder may compensate for the air reduction in mortar with ERCO. Other measures and approaches are needed in order to resolve the reduced strength.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.77-84
• /
• 2012

목재와 시멘트를 혼합하였을 때 목재의 어느 성분은 시멘트의 수화를 방해하는 것으로 알려져 있다. 본 연구에서는 온수에 의한 목편의 전처리 효과를 검토하기 위하여 2.4 mm 체를 통과시킨 소나무 목편을 온도가 각기 다른 수중에 일정시간 침지시킨 것을 잔골재의 일부로서 대체 사용한 모르타르의 응결 및 압축강도실험을 실시하였다. 이때 모르타르의 배합은 물-시멘트비 50%로 하고 목편의 잔골재에 대한 대체 사용량은 잔골재 질량의 0, 2, 4, 6, 8, 10%의 6수준으로 하였다. 그 결과 목편을 잔골재의 일부로서 대체 사용한 모르타르의 경우, 목편의 사용량이 많을수록 응결이 지연되었으며, 목편의 수처리는 모르타르의 응결지연문제를 개선시키는 효과가 있었다. 특히 수온 $100^{\circ}C$의 물에서 30분간 수처리한 목편을 2~6%의 범위에서 사용한 모르타르의 종결시간은 목편을 사용하지 않은 모르타르의 종결시간과 거의 비슷한 수준을 나타냈다. 또한 수처리한 목편을 사용한 모르타르의 강도는 수처리하지 않은 목편을 사용한 모르타르의 강도와 비교하였을 때, 재령 3일 강도는 거의 같았으나, 7일 및 28일의 강도는 보다 크게 되는 경향을 나타냈다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.132-133
• /
• 2014

In this study, high volume of industrial by-products including blast furnace slag, recycled aggregate powder and incineration ash have been utilized on the slurry of the foamed lightweight concrete. As to decrease the price of the lightweight foam concrete, mortar based slurry and concrete based slurry has been fixed. As the variation of the foam conduction ratio and aggregates, the foam ratio and compressive strength has been tested. Results showed that using recycled aggregates in the slurry showed better effect than using natural aggregates due to the alkali properties of the recycled aggregates could activate the potential hydraulic properties of the blast furnace slag. Consider about the low price of the recycled aggregates, it could be identified that using recycled aggregates in high volume blast furnace slag blended lightweight concrete showed better compressive strength than natural aggregates.