• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.758-763
• /
• 2006

We has been studied the thin film encapsulation effect for organic light-emitting diodes (OLED). To evaluate the passivation properties of the passivation layer materials, we have carried out the fabrication of green light emitting diodes with ultra violet(UV) light absorbing polymer resin, $SiO_2,\;and\;SiN_x$, respectively. From the measurement results of shrinkage properties according to the exposure time to the atmosphere, we found that $SiN_x$ thin film is the best material for passivation layer. We have investigated the emission efficiency and life time of OLED device using the package structure of $OLED/SiN_x/polymer$ resin/Al/polymer resin. The emission efficiency of this OLED device was 13 lm/W and life time was about 2,000 hours, which reach 95 % of the performance for the OLED encapsulated with metal.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1087-1092
• /
• 2007

We developed the 4-channel Light Medical Therapy Apparatus for Skin Injury Cure using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity and reservation. In this paper, the designed device was used to find out how high brightness LED light affects the skin injury of SD-Rat(Sprague-Dawley Rat). In the experiment, $1\;cm^2$ wounds on the skin injury of SD-Rat(Sprague-Dawley Rat) were made. Light irradiation group and none light irradiation group divided, each group was irradiated one hour a day for 14 days. In result, compared with none light irradiation group, the lower incidence of inflammation and faster recovery was shown in light irradiation group.

• Asian Journal of Turfgrass Science
• /
• v.9 no.3
• /
• pp.253-260
• /
• 1995

This study is aimed to understand the effects of temperature, light and GA soaking treatment on the seed germination of perennial ryegrass 'Dandy', creeping hentgrass 'Penlinks', tall fescue 'Arid' and Kentucky hluegrass 'Nasaw'. These experiments are carried in vitro, and their results obtained are summarized as the followings ; The optimum temperature for seed germination of perennial ryegrass 'Dandy' was found to he ranged at 20~30$^{\circ}C$, and the optimum temperature for germination of creeping bentgrass 'Penlinks', tall fescue 'Arid' and kentucky bluegrass 'Nasaw' seeds was found to be ranged at 20~25$^{\circ}C$, whereas the germination percentage under the below or above temperature of this range decreased. The germination of perennial ryegrass 'Dandy' and tall fescue 'Arid' seeds showed no effect on light, and while the germination percentage of creeping hentgrass 'Penlinks' increased more highly under the dark condition than under the light condition. The germination percentage decreased according to the higher temperature. The germination of Kentucky bluegrass 'Nasaw' seeds increased more highly under the dark condition than under the light condition at 20~25$^{\circ}C$, whereas the germination percentage under the dark condition at 15$^{\circ}C$ and 30$^{\circ}C$ decreased. In case of GA soaking treatment of seeds, all the cool season turfgrasses tested showed their own promoting effects on seed germination. The early germination of tall fescue 'Arid' was good without the soaking times. Creeping bentgrass 'Penlinks' and perennial ryegrass 'Dandy' had re-spectively the highest germination percentage at 10min and 1hr soaking treatment, and the longer the soaking time, the lesser the germination percentage. Kentucky bluegrass 'Nasaw' obtained the best results at 24has soaking treatment, and the longer the soaking time, the better the ger-mination percentage.

• Korean Institute of Interior Design Journal
• /
• no.5
• /
• pp.30-36
• /
• 1995

Light plays an important role in making a continuity of space and in determining the distinctive expression and char-acter of a space. Particularly, the introduction of natural light derives from our esthetic needs, as well as from the fundamental biologi-cal necessities of human beings. And also, adaptation to time and space is the vital factor of human survival and prosperity. Our visual recognition of light is usually formed not only by practical illumination but by analogy, expection and expe-rienced of lighting itself. As the forecase of natural light is (almost) impossible be-cause of variables such as changing weather, reflection rate of light and the patterns of shade, in designing the introduc-tion of daylight, there should be follow-ed careful considera-tion of the adaptation to such variety and the impet-us of light. The research was conducted to mane a contribution to cre-ate more rich and beautiful interior spaces by studying the characteristic of light which is one of the important factors of interior space design, and by inquiring the way to intro-duce light and its effect through the practical examples of Alvar Aalto, Le Corbusier and Louis I. Kahn.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.8-14
• /
• 2023

In this study, basic research was conducted on manufacturing technology of thick-walled light guide a component that controls the light source of automobile lamps. As a preliminary study for manufacturing the final injection molded parts, a model for analyzing the influence of micro patterns on light guides is presented. The optical characteristics of the light guide were analyzed according to the change of the curvature radius of the micro-optical pattern, and the injection molding characteristics of the light guide according to the change of injection molding conditions were analytically evaluated. It was confirmed that the luminance uniformity improves as the R value decreases for changes in the micro-pattern R value, but it was confirmed that there are technical limitations in actual injection mold core processing and high-replication injection molding. Injection molding analysis showed that cooling channel design is very important compared to general injection molding due to thick-wall characteristics and thickness variation. It was also confirmed that the cooling channel has a great influence on the cycle time and birefringence result due to residual stress. As a result of analyzing the influence of filling time, holding condition, and cooling on shrinkage, it was found that the cooling water temperature has a significant effect on the shrinkage of ultra-fine light guide parts, and the holding condition also has a significant effect.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.229-237
• /
• 2003

The purpose of this study was to compare the effect of exposure time on the polymerization of surface and 2 mm below the surface of light-cured restorative materials cured with three different light sources; conventional halogen light curing unit(XL 3000, 3M, U.S.A.), plasma arc light curing unit(Flipo, LOKKI, France) and light emitting diode(LED) light curing unit(Elipar Free light, 3M, U.S.A.) and compare the uniformity of polymerization from the center to the periphery of resin surfaces according to polymerization diameter cure with three different light sources. From the experiment, the following results were obtained. 1. In Z-100, Plasma arc light exposure time of 6 to 9 seconds and LED light exposure time of 40 to 60 seconds produced microhardness values similar to those produced with 40 second exposure to a conventional halogen light(p>0.05). 2. In Tetric Flow, Plasma arc light exposure time of 9 seconds and LED light exposure time of 40 to 60 seconds produced microhardness values similar to those produced with 40 second exposure to a conventional halogen light(p>0.05). 3. In Dyract AP, Plasma arc light exposure time of 6 to 9 seconds and LED light exposure time of 20 to 40 seconds produced microhardness values similar to those produced with 40second exposure to a conventional halogen light(p>0.05). 4. In Fuji II LC, Plasma arc light exposure time of 9 seconds and LED light exposure time of 20 to 60 seconds produced microhardness values similar to those produced with 40second exposure to a conventional halogen light(p>0.05). 5. Except Fuji II LC, microhardness was decreased from the center to the periphery in all light sources(p<0.05).

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.63-70
• /
• 2000

Light Rail is highlighted for its construction cost and operation ＆ maintenance cost in Korea. However, lack of analysis on driverless operation effect causes many disputes. In this paper, using latest driverless operation cost data. analysed cost reduction effect of it, with comparing present KNR's metropolitan subway signal system. It showed there is enough economic appropriateness B/C 1.241 on interest rate 6%, 1.076 on 8% and 0.943 on 10%, though it couldn't include passenger travel time value.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.708-713
• /
• 2010

In this research a ring light was developed so that a partial shadowless shooting for the patient's affected area at the medical treatment room and surgical operation room using high luminance light emitting diode (LED) for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area. And at the time of design of ring light, the characteristics of LED and the loss of light at the time of penetrating light diffusion PC were considered so that intensity of illumination for over 150 lx can be obtained. The result of measurement of the intensity of illumination of the ring light that was developed revealed that maximum intensity of illumination of 225.7 lx was obtained, while smoke index was measured to be maximum 78 Ra in the case of Red(50%) Green(100%) and Blue LED(60%). We could confirm that response speed was also very fast as 1.72 ms.

• Journal of Adhesion and Interface
• /
• v.23 no.2
• /
• pp.39-43
• /
• 2022

In optoelectronic devices including displays and solar cells that convert electricity into light or light into electricity, it is important to control optical behavior of light to improve device efficiency. Specifically, the control of internal emitting light in the OLEDs can induce more light to go out, improving luminous efficiency. In addition, the control of optical behavior of incident light in solar cells can increase optical path in the light absorption layer, increasing power-conversion efficiency. In this study, we generated wrinkles as a physical structure to control optical behavior of light and independently controlled their wavelength and height by changing stress relaxation time. To explore the effect of wavelength and height on optical behavior, we conducted UV/Vis spectroscopy analysis of wrinkles with various heights at a constant wavelength or various wavelengths at a comparable height, figuring out a wrinkle with high aspect ratio has more dispersive light and less straight light. It indicates that high aspect ratio is required to change the optical behavior and increase the optical path.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.61-69
• /
• 2002

To meet stringent LEV and ULEV emission standards, a considerable amount of development work was necessary to ensure suitable efficiency and durability of catalyst systems. The main challenge is to cut off the engine cold-start emissions. It is known that up to 80% of the total hydrocarbons(THC) are exhausted within the first five minutes in case of US FTP 75 cycle. Close-Coupled Catalyst(CCC) provides fast light-off temperature by utilizing the energy in the exhaust gas. However, if some malfunction occurred at engine operation and the catalyst temperature exceeds 1050$\^{C}$, the catalytic converter is deactivated and shows the poor conversion efficiency. This paper presents effEcts of engine operating conditions on catalytic converter temperature in a SI engine, which are the indications of catalytic deactivation. Exhaust gas temperature and catalyst temperature were measured as a function of air/fuel ratio, ignition timing and misfire rates. Additionally, light-off time was measured to investigate the effect of operating conditions. It was found that ignition retard and misfire can result in the deactivation of the catalytic converter, which eventually leads the drastic thermal aging of the converter. Significant reduction in light-off time can be achieved with proper control of ignition retard and misfire, which can reduce cold-start HC emissions as well.