• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.127-134
• /
• 2005

The machine vision has been applied to a number of industrial applications for quality control and automations to improve the manufacturing processes. In this paper, the automation system using the machine vision is developed, which is applicable to the marking process in a steel production process line. The working environment is very harsh to workers so that the automatic system in the steel industry is required increasingly. The developed automatic marking system consists of several mechanical and electrical elements such as the laser position detecting sensor system fur a structured laser beam which is projected to the billet in order to detect the geometry of the billet. An image processing algorithm has been developed to percept the two center positions of a camera and a billet, respectively, and to align two centers. A series of experiments has been conducted to investigate the performance of the proposed algorithm. The results show that two centers of the camera and the billet could be detected very well and differences between two center positions could be also decreased via the proposed location error decreasing algorithm.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권1호
• /
• pp.8-12
• /
• 2012

This study is maintains the condition of high temperature (above $600^{\circ}C$) within a short time using on microwave and high temperature heating elements. And removal characteristics according to changes in soil moisture, microwave power and temperature through the decomposition of the contaminated soil by oil. The difficulty resolvability material was sort of lubricating oil having long carbocyclic (C18-C50) and TPH removal rate reached 85.2% at 6 kW and $700^{\circ}C$ and thus the contaminant was removed 1,788 mg/kg within a process time of 40 minutes. In the case of light oil, gasoline contaminated soil, the removal amount showed 567 mg/kg and the treatment rate reached 98.4% at 6 kW, $500^{\circ}C$ and 20 minute. In the case of non-resolvability reached TPH concentrations on 2,000 mg/kg of worrisome level of soil contamination in the 3 zones at 6 kW, $700^{\circ}C$ and 30 minute. At the time, showed up processing costs 8,173 won per ton.

• 대한설비관리학회지
• /
• 제23권4호
• /
• pp.51-56
• /
• 2018

Computed tomography (CT) scan room in the department of radiology is very necessary to maintain pleasant and proper illuminance to relieve fatigue and inconvenience because it affects the work environment to the radiologist. Accordingly, this paper describes the method for measurement of illuminance that exposed to an environmental elements in a CT scan room of the hospital. Therefore, the purpose of this paper is to propose an optimal environment of CT scan room based on the measurement of illuminance. In addition, the 5 point method by KS C7612 was applied to measure the illuminance with illuminometer (Unfors xi light probe) in the CT scan room. In result of this paper, minimum value and maximum value of illuminance in the CT scan room was measured 212.7 lux and 354.8 lux, respectively. The illuminance of CT scan room was lower than KS A 3011. Finally, the work environment in CT scan room should provide higher illuminance for the comfortable environment of radiologists and patients.

• Acta Via Serica
• /
• 제6권2호
• /
• pp.61-90
• /
• 2021

Recent excavations in Qinghai Province, China, have disclosed textiles and artworks from Tuyuhun-Tubo (Tibetan) tombs, dated to the 7^th-9^th centuries, that suggest artistic and cultural exchanges along an external southern branch of the main Silk Road, between Gansu and Sichuan Provinces, across the Qinghai-Tibetan plateau toward the Himalayas. Many similar textiles, possibly from this area, have appeared lately on the art market and ended in private collections. Although these textiles, dated to the early Tibetan period, follow a popular prototype established in Central Asia in the 6^th century, the technical features, colors, and other indigenous elements suggest that they were woven in workshops different from those established between Sogdiana and Gansu. The exhibition "Cultural Exchange Along the Silk Road - Masterpieces of the Tubo Period," organized by the Dunhuang Research Academy and the Pritzker Collaborative Art between July and October 2019 in Dunhuang, Gansu, was a groundbreaking event that gathered scholarly attention on early Tibetan material culture, but a relevant publication is still forthcoming. In my previous work, I briefly discussed a group of silk textiles, possibly from Qinghai or Sichuan, that I analyzed in 2014 in the China National Silk Museum in Hangzhou, Zhejiang. In light of the recent material excavated, published online, or displayed in Dunhuang, in this article, I reevaluate the data previously collected, and discuss in detail the technical and iconographic features of one of the fragments held in Hangzhou. Eventually, the piece was recognized as the ending part of a large panel, which is now in the Abegg Stiftung in Riggisberg, Switzerland.

• Corrosion Science and Technology
• /
• 제21권3호
• /
• pp.200-208
• /
• 2022

Aluminum alloy is used by adding various elements according to the needs of the industry. Aluminum alloys such as 5052 and 6061 are known to possess excellent corrosion resistance by adding Mg. Despite their excellent physical properties, corrosion can occur. To solve this problem, an anodization technique generally can improve corrosion resistance by forming an oxide structure with maximized hydrophobic properties through coatings. In this study, the anodizing technique was used to improve the hydrophobicity of aluminum 5052 and 6061 by creating porous nanostructures on top of the surface. An oxide film was formed by applying anodizing voltages of 20, 40, 60, 80, and 100 V to aluminum alloys followed by immersion in 0.1 M phosphoric acid for 30 minutes to expand oxide pores. Contact angle and corrosion characteristics were different according to the structure after anodization. For the 5052 aluminum, the corrosion potential was improved from -363 mV to -154 mV as the contact angle increased from 116° to 136°. For the 6061 aluminum, the corrosion potential improved from -399 mV to -124 mV when the contact angle increased from 116° to 134°.

• Steel and Composite Structures
• /
• 제43권3호
• /
• pp.403-417
• /
• 2022

Recently, there has been an increasing demand for buildings that allow rapid assembly of construction elements, have ample open space areas and are flexible in their final intended use. Accordingly, researchers have developed new competitive structures in terms of cost and efficiency, such as cold-formed steel and timber composite floors, to satisfy these requirements. Cold-formed steel and timber composite floors are light floors with relatively high stiffness, which allow for longer spans. As a result, they inherently have lower fundamental natural frequency and lower damping. Therefore, they are likely to undergo unwanted vibrations under the action of human activities such as walking. It is also quite expensive and complex to implement vibration control measures on problematic floors. In this study, a finite element model of a composite floor reported in the literature was developed and validated against four-point bending test results. The validated FE model was then utilised to examine the vibration behaviour of the investigated composite floor. Predictions obtained from the numerical model were compared against predictions from analytical formulas reported in the literature. Finally, the influence of various parameters on the vibration behaviour of the composite floor was studied and discussed.

• Elastomers and Composites
• /
• 제57권1호
• /
• pp.1-8
• /
• 2022

In this study, the photo-deposition method was used to introduce Ag onto the surface of TiO₂ to synthesize an Ag-TiO₂ composite. The effects of the varying amounts of AgNO₃ precursor and annealing time periods on the Ag content in the composites, as well as their antibacterial characteristics under visible light conditions were studied. SEM analysis revealed the spherical morphology of the Ag-TiO₂ composite. Compared with TiO₂, the Ag particles were too small to be observed. An XPS analysis of the Ag-TiO₂ surface confirmed the Ag content and showed the peak intensities for elements such as Ag, Ti, O, C, and Si. The highest Ag content was observed when 33.3 wt.% of AgNO₃ and an annealing time of 6 h were employed; this was the optimum annealing time for Ti-Ag-O bonding, in that the lowest number of O bonds and the highest number of Ag bonds were confirmed by XPS analysis. Superior antibacterial properties against Bacillus and Escherichia coli, in addition to the widest inhibition zones were exhibited by the Ag-TiO₂ composite with an increased Ag content in a disk diffusion test, the bacterial reduction rate against Staphylococcus aureus and Escherichia coli being 99.9%.

• 산경연구논집
• /
• 제13권8호
• /
• pp.9-18
• /
• 2022

Purpose: K-beauty products industry trends, estimates and dynamics are examined in this study to discover a potential possibility for growth. There is a thorough examination of the elements that drive and impede the expansion of the K-beauty industry. This study aims to investigate marketing strategy of K beauty product to enhance economic growth in South Korea. Research design, data and methodology: This study used one of the most famous approach for analyzing the current literature which is a PRISMA (Process and Systematic Reviews and Meta-Analyses) method. This method maps out the number of records identified, the included and the excluded ones with the reasons for the exclusion. The technique clearly states the research problem and the appropriate scope. Results: The theoretical findings of prior literature indicates K-beauty companies should retain physical locations despite the trend toward online commerce, in order to guarantee that they meet the demands of different customers and enhance customer experiences to develop trust and loyalty. Conclusions: The findings of this research are of academic importance since they provide light on customer preferences for new K-beauty products. While past research has often ignored certain kinds of influencers, this study emphasized the need of considering influencers and certain product exposure strategies together, which has major academic consequences.

• 한국결정성장학회지
• /
• 제33권4호
• /
• pp.132-138
• /
• 2023

Doped and undoped-BiVO₄ samples with different elements (Li, Mg) and amounts were synthesized with a hydrothermal method. The synthesized samples were characterized using various techniques including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-Vis diffusion reflectance spectroscopy (UV-Vis DRS), and photoluminescence (PL) spectroscopy. Photocatalytic activity of the samples was evaluated by measuring the degradation of methyl blue (MB) under visible light irradiation. The results indicated that the incorporation of Mg and Li into BiVO₄ caused lattice distortion, the presence of surface hydroxyl groups, a narrower band gap, and a reduced recombination ratio of photo-induced electron-hole pairs. Notably, the photocatalytic activity of Mg5%-Li5% co-doped BiVO₄ sample exhibited a significant improvement compared to that of undoped BiVO₄ sample.

• ETRI Journal
• /
• 제45권1호
• /
• pp.163-170
• /
• 2023

We report an electroabsorption modulator (EAM)-integrated distributed Bragg reflector laser diode (DBR-LD) capable of supporting a high data rate and a wide wavelength tuning. The DBR-LD contains two tuning elements, plasma and heater tunings, both of which are implemented in the DBR section, which have blue-shift and red-shift in the Bragg wavelength through a current injection, respectively. The light created from the DBR-LD is intensity-modulated through the EAM voltage, which is integrated monolithically with the DBRLD using a butt-joint coupling method. The fabricated chip shows a threshold current of approximately 8 mA, tuning range of greater than 30 nm, and static extinction ratio of higher than 20 dB while maintaining a side mode suppression ratio of greater than 40 dB under a window of 1550 nm. To evaluate its modulation properties, the chip was bonded onto a mount including a radiofrequency line and a load resistor showing clear eye openings at data rates of 25 Gb/s nonreturn-to-zero and 50 Gb/s pulse amplitude modulation 4-level, respectively.