• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.26-36
• /
• 2013

This paper presents a simple and cost-effective stand-alone rapid battery charging system of 30kW for electric vehicles. The proposed system mainly consists of active front-end rectifier of neutral point clamped 3-level type and non-isolated bi-directional dc-dc converter of multi-phase interleaved half-bridge topology. The charging system is designed to operate for both lithium-polymer and lithium-ion batteries. The complete charging sequence is made up of three sub-interval operating modes; pre-charge mode, constant-current mode, and constant-voltage mode. The pre-charge mode employs the stair-case shaped current profile to accomplish shorter charging time while maintaining the reliable operation of the battery. The proposed system is specified to reach the full-charge state within less than 16min for the battery capacity of 8kWh by supplying the charging current of 78A. Owing to the simple and compact power conversion scheme, the proposed solution has superior module-friendly mechanical structure which is absolutely required to realize flexible power expansion capability in a very high-current rapid charging system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.362-363
• /
• 2008

Well-defined o-$LiMnO_2$ cathode materials were synthesized using LiOH and $Mn_3O_4$ starting materials at $1050^{\circ}C$ in an argon flow by quenching method. The synthesized $LiMnO_2$ particles with crystalline phases were identified with X-ray diffraction (XRD, Dmax/1200, Rigaku). XRD results, demonstrated that the compound $LiMnO_2$ can be indexed to a single-phase material having the orthorhombic structure. In this paper, we analyzed the electrochemical performance of $LiMnO_2$/Li using solid polymer electrolyte and liquid electrolyte.

• 전기화학회지
• /
• 제19권3호
• /
• pp.101-106
• /
• 2016

본 연구에서는 리튬 고분자 이차전지의 안정성과 전기화학적 특성을 향상시키기 위하여 poly(ethylen oxide)(PEO)를 lithium bis (trifluoromethanesulfonyl)imide, N-butyl-N-methylpyrrolidinium bis (trifluoromethanesulfonyl)imide 와 블렌딩-가교 법으로 복합화시켜 PEO-LiTFSI-$Pyr_{14}TFSI$ 고분자 전해질을 제조하였다. 전기화학적 산화 안정성 테스트에서 PEOLiTFSI-$Pyr_{14}TFSI$ 복합 고분자 전해질은 비록 4.4 V에서 약간의 산화곡선을 보이지만 5.7 V까지 안정하였다. PEO-LiTFSI-$Pyr_{14}TFSI$ 고분자 전해질은 온도가 증가할수록 이온전도도가 증가하며, PEO계열의 고분자 전해질의 특성상 상온에서 $10^{-6}S\;cm^{-1}$로 낮지만 $70^{\circ}C$에서는 $10^{-4}S\;cm^{-1}$까지 증가 하였다. 리튬 고분자 전지의 전기화학적 특성을 측정하기 위해 $LiFePO_4$ 양극, PEOLiTFSI-$Pyr_{14}TFSI$ 복합 고분자 전해질, 리튬 음극으로 전지를 구성하였으며 0.1 C의 전류밀도에서 방전 용량이 $30^{\circ}C$에서 $40mAh\;g^{-1}$, $40^{\circ}C$에서는 $69.8mAh\;g^{-1}$, $50^{\circ}C$에서는 $113mAhg^{-1}$을 나타내 온도의 증가에 따라 방전 용량이 증가함을 알 수 있었다. PEO-LiTFSI-$Pyr_{14}TFSI$ 복합 고분자 전해질은 $LiFePO_4$양극과 함께 50도에서 가장 우수한 충-방전 성능을 보여주었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1034-1038
• /
• 1995

The purpose of this study is to research and develop $TiS_2$ composite cathode for lithium polymer battery(LPB). $TiS_2$ electrode represent a class of insertion positive electrode used in Li secondary batteries. In this study, we investigated preparation of $TiS_2$ composite cathode and AC impedance response of $TiS_2$ composite/SPE/Li cells as a function of state of charge(SOC) and cycling. The resistance of B type cell using $TiS_2PEO_8LiClO_4PC_5EC_5$ composite cathode was lower than that of A type cell using $TiS_2PEO$ composite cathode. The cell resistance of B type cell is high for the first few percent discharge, decreases for midium discharge and then increases again toward the end of discharge. We believe the magnitude of the cell resistance is dominated by passivation layer impedance and small cathode resistance. AC impedance results indicate that the cell internal resistance increase with cycling, and this is attributed to change of passivation layer impedance with cycling. The passivation layer resistance($R_f$) of B type cell decreases for the 2nd cycling and then increases again with cycling. Redox coulombic efficiency of B type cell was about 141% at 1st cycle and 100% at 12th cycle. Also, $TiS_2$ specific capacity was 115 mAh/g at 12 cycle.

• 전기화학회지
• /
• 제6권2호
• /
• pp.98-102
• /
• 2003

Urethane acrylate oligomer was synthesized and used in a gel polymer electrolyte (GPE) and then its electrochemical performances were evaluated. $LiCoO_2/GPE/graphite$ cells were prepared and their performances depending on discharge currents and temperatures were evaluated. The precursor containing $5 vol\%$ curable mixture had a low viscosity relatively. ionic conductivity of the gel polymer electrolyte at room temperature and $-20^{\circ}C$ was ca. $5.9\times10^{-3}S{\cdot}cm^{-1}\;and\;1.4times10^{-3}S{\cdot}cm^{-1}$, respectively. GPE showed good electrochemical stability up to potential of 4.5V vs. RLi/Li^+.\;LiCoO_2/GPE/graphite$ cell showed a good high-rate and low-temperature performance.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.71.2-71.2
• /
• 2012

There are rising demands for developing more efficient energy materials to stem the depletion of fossil fuels, which have prompted significant research efforts on proton exchange fuel cells (PEFCs) and lithium ion batteries (LIBs). To date, both PEFCs and LIBs are being widely developed to power small electronics, however, their utilization to medium-large sized electric power resources such as vehicle and stationary energy storage systems still appears distant. These technologies increasingly rely upon polymer electrolyte membranes (PEMs) that transport ions from the anode to the cathode to balance the flow of electrons in an external circuit, and therefore play a central role in determining the efficiency of the devices; as ion transport is a kinetic bottleneck compared to electrical conductivity, enormous efforts have been devoted to improving the transport properties of PEMs. In present study, we carried out an in-depth analysis of the morphology effects on transport properties of PEMs. How parameters such as self-assembled nanostructures, domain sizes, and domain orientations affect conductivities of PEMs will be presented.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2698-2700
• /
• 2010

• 전기화학회지
• /
• 제15권2호
• /
• pp.95-100
• /
• 2012

올리빈 구조를 가지는 $LiFePO_4$ 양극활물질은 낮은 가격과 안정성으로 인해 리튬 이차전지 시장에서 큰 관심을 받고 있다. 그러나 낮은 이온 전도도와 작동전압 때문에 상업적으로 이용되기엔 사용분야의 응용에 제한이 있다. 이러한 문제를 해결하기 위해서 철 양이온을 망간 양이온과 같은 전이금속으로 치환함으로써 작동전압을 높이는 연구가 시행되고 있다. 또한 미세구조의 나노화를 통해 리튬 이온의 확산거리를 짧게 만들어 줌으로써 이온 전도도를 높여주는 연구도 진행 중이다. 그래서 이번 연구에서는 이온의 확산거리를 짧게 만들어 주기 위해 표면적을 넓힐 수 있는 전기방사를 이용해 물질을 합성하였고, 이를 확인하기 위하여 시차주사현미경 관측을 통해 균일한 나노 섬유의 형성을 확인하였다. 또한 결정구조를 관찰하기 위해 X-선 회절 분석을 하였는데, 다른 상의 관찰 없이 단일상의 결정구조를 얻음을 확인하였다. 전기화학적 성능 확인방법으로는 충방전 테스트기를 이용하여 초기 충방전 곡선을 분석하였고, 계면저항 및 리튬 양이온의 확산을 알아보기 위해 임피던스 측정을 실행하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.273-276
• /
• 1996

Polyphenylenediamine(PPD) film was prepared with dimethylsulfoxide after the synthesis of PPD by chemical polymerization. The molecular structure of conductive polymer synthesized were discussed by using SEM, FT-IR, NMR. The electrical conductivity measurements were carried out at room temperature. The electrical conductivity which was obtained from electrical instrument was 1.98${\times}$10$\^$-2/ S/cm at ambient temperature.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.228-229
• /
• 2011

본 논문은 SPKF(Sigma-point Kalman Filter)를 이용한 리튬 폴리머 배터리(LiPB)의 충전 상태(SOC: State of Charge) 추정 방법을 제안한다. 배터리 모델은 단순화된 테브난 등가회로 모델과 Runtime 모델이 결합되어 있고, Runtime 모델의 양단 전압을 이용하여 SOC를 추정한다. 제안된 알고리즘은 시뮬레이션을 통해 그 타당성이 검증된다.