• 한국지능시스템학회논문지
• /
• 제27권2호
• /
• pp.106-112
• /
• 2017

본 논문에서는 자기부상 물류이송시스템의 부상 및 추진제어기 설계 방법을 제안하였다. 부상제어기는 롤과 피치 움직임을 최소화시키기 위해 전자석간의 상호영향을 고려하여 설계하였다. 자기부상이송시스템의 구조적인 단점을 해결하기 위하여 기준입력단에 지수형 필터를 적용하여 기존 제어기의 문제점을 개선하였다. DSP기반의 제어하드웨어를 개발하고, 정격 공극 부상 실험을 통해 부상제어기법이 설계 목표를 만족함을 검증하였다. 추진제어기는 공간벡터 전압변조기법을 사용하고, 레일의 전 구간에 부착된 바코드 정보로부터 절대위치를 감지하여 위치 및 속도 프로파일을 추종하도록 설계하였다. 추진제어 왕복 이동 실험을 통해 위치 제어 결과가 만족할만한 성능임을 확인하였다.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.715-721
• /
• 2010

This paper deals with the design and characteristic analysis of electro-magnet/permanent-magnet (EM-PM) hybrid levitation and propulsion device for high-speed magnetically levitated (maglev) vehicle. The machine requires PMs with high coercive force in order to levitate the vehicle by only PMs, and propulsion force is supplied by long-stator linear synchronous motor (LSM). The advantages of this configuration are an increasing levitation airgap length and decreasing total weight of the vehicle, because of the zero-power levitation control. Several design considerations such as machine structure, manufacturing, and control strategy are described. Moreover, the levitation and propulsion device for high-speed maglev vehicle has been designed and analyzed usign the electromagnetic circuit and FE analysis. In order to verify the design scheme and feasibility of maglev application, 3-DOF static force test set is implemented and tested. The obtained experimental data using the static tester shows the validity of the design and analysis approaches.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.94-96
• /
• 2009

This paper deals with the design considerations of electro-magnet (EM)-permanent magnet (PM) hybrid levitation and propulsion device for magnetically levitated (maglev) vehicles. Several design considerations such as machine structure, manufacturing, and control strategy are described. In order to verify the design scheme and feasibility of control strategy, dynamic test set is implemented and tested.

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.35-41
• /
• 2005

An air levitation type wafer transfer system is composed of control and transfer track. Wafer transfer speed is mainly affected by air velocity of propulsion nozzle. In this study, the propulsion force coefficient was evaluated experimentally for the nozzle with 0.5mm, 0.8mm, and 1.0mm diameter. As a result, the propulsion force was largest in the smallest size of nozzle at same air velocity. The propulsion force coefficient of nozzle increases with reducing diameter of nozzle. This increment of propulsion force coefficient was enlarged remarkably at the 0.5mm diameter of nozzle.

• 설비공학논문집
• /
• 제16권9호
• /
• pp.820-827
• /
• 2004

The propulsion force acting on a wafer in an air levitation system was measured accurately and then, the corresponding force coefficient was determined. The theoretical propulsion force on the wafer bottom surface were obtained by CFD simulations and from these results the propulsion force coefficient was deduced. The transportation velocity of a wafer was estimated by using both experimental and numerical force coefficients, for various air velocity of nozzle injection. When the numerical results are compared to the experimental data, the numerical results agree well Quantitatively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.623_624
• /
• 2009

This paper deals with the characteristic analysis of electro-magnet (EM)-permanent magnet (PM) hybrid levitation and propulsion device for magnetically levitated (maglev) vehicles. Several machine characteristics such as levitation force with/without control current and thrust are described. In order to verify the analysis results and feasibility of high-speed operation of the maglev vehicle, real-scale static test set is implemented and tested.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.384-387
• /
• 1990

This paper describes the design of the power conversion system for the 3-ton prototype magnetic levitation system. Electric power needed for the propulsion and levitation system of the vehicle is supplied by the wayside rectifier through the power rail and is picked up by the on board power collector, and is supplied to the propulsion VVVF inverter and levitation chopper. In this paper, design characteristic of the VVVF inverter, chopper and power source unit which provides control power to the levitation controller and levitation power to the chopper is described.

• 한국지능시스템학회논문지
• /
• 제24권2호
• /
• pp.129-135
• /
• 2014

본 논문에서는 이동할 때 마찰이 없고 소음이나 먼지가 발생하지 않는 자기부상 물류이송시스템의 설계 방법을 제안한다. 제안된 자기부상 이송시스템은 크게 부상시스템과 추진시스템으로 구분된다. 자기부상시스템은 레일로 전자석을 끌어당기는 흡인식 부상시스템으로 구현하였으며, PID 제어기를 사용하여 전자석 공급 전류를 제어하였다. 자기부상 이송시스템의 추진시스템에는 바퀴의 마찰과 모터의 회전이 없고 소음이 최소화 되는 선형 유도전동기를 사용하였다. 추진시스템의 제어방법은 입력되는 직류전압에서 큰 교류전압을 얻을 수 있는 공간벡터 펄스폭 변조방식을 적용하였다. 제안한 자기부상 물류이송시스템은 부상 및 추진 제어 실험을 통하여 성능을 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.220-224
• /
• 2005

EMU(Electric Multiple Unit) operated in local area is mostly consist of moving system on the rail and the traction motor drives the gear and wheel with the mechanical propulsion force. Most of countries are interested in Magnetic Levitation Vehicle for the transportation system on next generation and they have been studying about it continuously. Thus this paper is studied the Linear Induction Motor as the propulsion equipment of Magnetic Levitation Vehicle

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.944-949
• /
• 2017

Recently, the demand of maglev systems in the manufacturing industry for LCD and OLED display panels, which are required to be very clean and possess vacuum systems, has been increasing due to their characteristics such as being non-contact, noise free and eco-friendly. However, it is still a challenge to simultaneously control both the propulsion and levitation for their interactive effect difficult to be exactly measured. In this paper, we proposed a new tuning method for controlling the magnetic levitation force robustly against the levitation disturbance caused by a propulsion system, based on LQ servo optimal control. The disturbance torque of the LSM propulsion system is calculated through FEM analysis in such a way that the LQ servo controller is determined in order to minimize the effect of the disturbance. The robust performance of the proposed LQ servo control method for the in-track type magnetic levitation systems is demonstrated via simulations and experiments.