• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.371-377
• /
• 2006

The purposes of this study were to assess the accuracy of measurements in pre-enlarged canals with small instruments and to compare the accuracies, in enlarged canal, with small size instruments and instruments that match the actual canal diameter using Root ZX, Bingo1020, SmarPex, and e-Magic Finder. Ten extracted teeth were embedded in an alginate model made for testing apex locators. A size 10 file was placed into the root canal until the tip of the file reached the plane of the major diameter of the foramen under a dental operating microscope at the 25 x magnification. The measurement was done with digital caliper and defined as actual length. Electronic length measurement with a size 10 file in pre-enlarged canal was done by reading the index indicating Apex of each device to gain a definite value After completion of canal enlargement to a size 45 file, each difference between actual length and electric measurement value with a size 10 and 40 files in enlarged canal was recorded as L10 and L40. The one-way ANOVA and Scheffe's multiple range tests were computed for analyze the differences among the four apex locators in the same group. The Student's t-test between L10 and L40 of each locator was done. The accuracies of electronic measurements were significantly different among the 4 devices. The file size made no difference on the accuracy of electronic measurement in enlarged canal with same device. The e-Magic Finder was the most accurate device among the 4 apex locators used in this study.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.1
• /
• pp.87-98
• /
• 1994

This paper describes a method of constructing VC2 Chord-length spline surface from semi-evenly spaced 3D point array. The suface uses Hermite interpolant as Ferguson surface, and it is an extention of chord-length spline curve to surface The proposed surface may be widely used in interpolating smoothly 3D point data obtaind by measurement or engineering design.

• Journal of Fashion Business
• /
• v.3 no.2
• /
• pp.77-83
• /
• 1999

For the purpose of investigating the factor of foot and calf growth of primary-school children who are fastgrowing during this period, a group of the 1st graders of primary-school had been the subject of this measurement in 1995 and thereafter they became the subject again in 1997 when they were the 3rd graders. Measurement was carried out in 30 items including height and weight and marthin-type measurer and Footprint were used for this measurement. As the result, in the part of calf, the measuring items of maximum calf circumference and knee circumference, and in the part of foot, the items of instep circumference, heel circumference, instep circumference, measured angle of big toe showed the highest growth. The average growth of length for 2 years appeared about 2cm and the parts of instep circumference, heel circumference had rapidly grown rather than in the part of foot circumference. Height growth of the part of toe was about 0.1 and in the factor analysis of foot measurement of 8-year and 10-year and children, the following findings appeared in both cases that height was related with the items of calf height and foot length and weight was related with calf circumference and breadth, foot circumference items.

• Journal of Embryo Transfer
• /
• v.12 no.2
• /
• pp.203-209
• /
• 1997

This study was carried out to compare the actual size(length and height) of ovaries, follicles and corpora lutea of Korean native cow with those on sonograms. We used 3 different probes(3.5 MHz abdominal probe, 6.5 MHz transvaginal probe and 5.0 MHz transrectal probe) and a calipher for measurements of ovaries, follicles and corpora lutea on sonograms and actual size. Under water immersion, 157 ovaries were scanned with 3 probes and measured in actual size and compared each other. The average height and width of ovaries of Korean native cows were 17.40$\pm$3.99 and 34.23$\pm$6.02mm, respectively. In comparison of height, length of ovaries and preovulation follicles, we found that image with a transvaginal probe was nearly the same as the actual size(p<0.01), but with an abdominal probe the image was appeared larger than the actual size. In measurement(diameter) of preovulation follicles the transvaginal probe was proven to be more accurate to the actual size than other probes and in corpus luteum measurement all probes were accurate. In the comparison of number of follicles by different size ranges, there was no statistical difference in the count of follicles over 10 mm in diameter between the transvaginal probe and naked eyes.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.171-178
• /
• 2008

This paper is concerned with the development of a measurement system using field measuring device which will give the membrane stress of the membrane structures. Up to this point, several techniques on measurement of membrane stresses has been proposed and some have been used in the fields, but accuracy of the measured stresses to be far from reliable one. Such situation has not been changed until recent days, we do not have the measurement device on which we can depend. On top of that, due to the different properties in cross directions for material of the membrane, the stress in the warp direction is different from that in the fill one. A new method is proposed to measured membrane stresses in two different direction separately, where instead of membrane stresses directly, an external force perpendicular to the membrane to be applied. A portable device can measure the applied force and the displacement. A special testing bed to be fabricated to accommodate $50cm{\times}50$ manbrane specimen which can apply 5 ton load in two orthogonal direction. A special device using push-pull gage was developed. To measure the membrane stresses in warp and fill direction separately, a different length of the tips are used. The measuring device which can called tension meter, can be calibrated on the testing bed, and optimized the length and shape of tip.

• Journal of the Korean Society of Costume
• /
• v.15
• /
• pp.21-45
• /
• 1990

The purpose of this thesis is to study the method of the reasonable pattern design. The studying method is based on the original principle of the trousers' cutting and I have a hypothesis about the trousers pattern which should be proved. When I selected the practical method, I made use of the international measuring rule, graph paper and tracing paper, in order to prove the new pattern design. The reasonable pattern design should be the one of the suitable original principles to be suited in the design through any measurement. Therefore, I have discussed the above mentioned design. I find out the conclusion to prove the hypothesis of pattern design with the experimental measure after showing the above mentiond design. The characteristics is as follows. First : To be convinient when walking, because of little degree as folding of the front part of trousers with the under-angle. Second : To be suitable in proportion to the length of trousers and the under-angle. Third ; When folding the center line of the Sapok (a name of one of the trousers parts), the length of the Sapoks is same and harmonized with the Sapoks because of the same angle of both Sapoks in any case of the measurement. Fourth : No correction of the lines when dressing, for the same points of the large Sapok and the small one. Fifth : To be easiness of the pattern design through the concrete measurement. I could find out a little extent errors of pattern showings, an easiness of dressing, scientification of formation in Korean trousers and standard of the practical measurement in the program to be presented as the result of studying.

• Journal of Elementary Mathematics Education in Korea
• /
• v.19 no.3
• /
• pp.387-408
• /
• 2015

The purpose of this research is to analyze the mathematical tasks of length measurement in two different perspectives, the level of cognitive demands and learning trajectories, and restructure the mathematical tasks so that the students' conceptual learning is promoted and students are able to have opportunities to think more broadly. Ten lessons with the restructured mathematical tasks were implemented for a class of 2nd grade elementary students. Also a qualitative and in-depth study was conducted with 4 students of the target group. The study shows that firstly, the restructured tasks requiring high level of cognitive skills, had positive effects in increasing the students' level of thinking and reasoning. Secondly, the tasks modified according to the learning trajectories of Szilag, Clements & Sarama(2013) in length measurement, have proven to promote students' concept learning and elaborate the students' level of thinking.

• Imaging Science in Dentistry
• /
• v.43 no.3
• /
• pp.185-190
• /
• 2013

Purpose: The aim of the present study was to evaluate the measurement accuracy of endodontic file length on periapical digital radiography after application of noise reduction digital enhancement. Materials and Methods: Thirty-five human single-rooted permanent teeth with canals measuring 20-24 mm in length were selected. ISO #08 endodontic files were placed in the root canals of the teeth. The file lengths were measured with a digital caliper as the standard value. Standard periapical digital images were obtained using the Digora digital radiographic system and a dental X-ray unit. In order to produce the enhanced images, the noise reduction option was applied. Two blinded radiologists measured the file lengths on the original and enhanced images. The measurements were compared by repeated measures ANOVA and the Bonferroni test (${\alpha}=0.05$). Results: Both the original and enhanced digital images provided significantly longer measurements compared with the standard value (P<0.05). There were no significant differences between the measurement accuracy of the original and enhanced images (P>0.05). Conclusion: Noise reduction digital enhancement did not influence the measurement accuracy of the length of the thin endodontic files on the digital periapical radiographs despite the fact that noise reduction could result in the elimination of fine details of the images.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.289-299
• /
• 1996

It is necessary to measure the length of a root canal in order to attain a satisfactory prognosis after root canal therapy. There are several methods for determining root canal length, such as tactile sensation by the dental practitioner, the utilization of x-ray film, and electronic root canal measurement. Among these, the electrical measurement methods, in which the impedence between the oral mucous membrane and periodontal membrane is determined, have advantages of simplicity and accuracy. During root canal treatment, the root canal contains a solution of high electrical conductivity such as pus, blood, sodium hypochlorite and so on. Recently a new electronic root canal measurement device of frequency-dependent type has been developed, which is capable of measuring the length of root canal under moist conditions. Endex and Root ZX, which are frequency-dependent type, were evaluated for accuracy of measuring root canal length in vivo by stereomicroscope. The result were as follows ; 1. 82.5% of Endex and 87.5% of Root ZX measured in the range of ${\pm}0.5$ mm from the apical foramen and both showed 57.5 % in the range of 0.1 mm to 0.5 mm. 2. Endex showed significantly higher accuracy in vital teeth than nonvital teeth(p<0.05). But in case of Root ZX, there was no significant difference between vital and nonvital teeth. 3. As a result of this study, there was no significant difference in accuracy between Endex and Root ZX, and both devices showed file passes the apical foramen in more than half of the cases, and it is thought that this must be considered clinically.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.51-57
• /
• 2004

A simple fiber length measurement technique has been demonstrated by using a self-seeding laser oscillation of a Fabry-Perot laser diode. We induced a self-seeding laser oscillation through a closed-loop by adjusting the modulation frequency of a Fabry-Peort laser diode when the output optical pulse of the laser reinjected into the laser after passing through the closed-loop. The length of a fiber-under-test was calculated from the difference between my two modulation frequencies at which self-seeding laser oscillation occurs at a specific mode. We have experimentally confirmed the technique for various fiber lengths from 0.1 km to 75 km. The relative error between the measurement result of the proposed technique and that of a commercial instrument was less than 0.24 %. The repeatability of the proposed technique was better than 0.1 %.